[1] R DAROLIA. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects. International Materials Reviews, 58, 315-348(2013).

[2] N CURRY, N MARKOCSAN, H LI X et al. Next generation thermal barrier coatings for the gas turbine industry. Journal of Thermal Spray Technology, 20, 108-115(2011).

[3] D STӦVER, G PRACHT, H LEHMANN et al. New material concepts for the next generation of plasma-sprayed thermal barrier coatings. Journal of Thermal Spray Technology, 13, 76-83(2004).

[4] L XUE Z, B GUO H, K GONG S et al. Novel ceramic materials for thermal barrier coatings. Journal of Aeronautical Materials, 38, 10-20(2018).

[5] N CURRY, W JANIKOWSKI, Z PALA et al. Impact of impurity content on the sintering resistance and phase stability of dysprosia- and yttria-stabilized zirconia thermal barrier coatings. Journal of Thermal Spray Technology, 23, 160-169(2014).

[6] G LYU, G CHOI B, Z LU et al. Effect of thermal cycling frequency on the durability of Yb-Gd-Y-based thermal barrier coatings. Surface & Coatings Technology, 364, 187-195(2019).

[7] M GORAL, S KOTOWSKI, A NOWOTNIK et al. PS-PVD deposition of thermal barrier coatings. Surface & Coatings Technology, 237, 51-55(2013).

[8] L ŁATKA. Thermal barrier coatings manufactured by suspension plasma spraying- a review. Advances in Materials Science, 18, 95-117(2018).

[9] P JONNALAGADDA K, R ERIKSSON, H LI X et al. Thermal barrier coatings: life model development and validation. Surface & Coatings Technology, 362, 293-301(2019).

[10] M PARK H, H JUN S, G LYU et al. Thermal durability of thermal barrier coatings in furnace cyclic thermal fatigue test: effects of purity and monoclinic phase in feedstock powder. Journal of the Korean Ceramic Society, 55, 608-617(2018).

[11] M KARLSSON A. Modeling failures of thermal barrier coatings. Key Engineering Materials, 333, 155-166(2007).

[12] J HUA J, P ZHANG L, W LIU Z et al. Progress of research on the failure mechanism of thermal barrier coatings. Journal of Inorganic Materials, 27, 681-686(2012).

[13] K MATSUI. Sintering kinetics at constant rates of heating: mechanism of silica-enhanced sintering of fine zirconia powder. Journal of the American Ceramic Society, 91, 2534-2539(2008).

[14] A TSIPAS S, O GOLOSNOY I, R DAMANI et al. The effect of a high thermal gradient on sintering and stiffening in the top coat of a thermal barrier coating system. Journal of Thermal Spray Technology, 13, 370-376(2004).

[15] R CHOI S, M ZHU D, A MILLER R. Effect of sintering on mechanical properties of plasma-sprayed zirconia-based thermal barrier coatings. Journal of the American Ceramic Society, 88, 2859-2867(2005).

[16] R VAβEN, N CZECH, W MALLÉNER et al. Influence of impurity content and porosity of plasma-sprayed yttria-stabilized zirconia layers on the sintering behaviour. Surface and Coatings Technology, 141, 135-140(2001).

[17] S PAUL, A CIPITRIA, O GOLOSNOY I et al. Effects of impurity content on the sintering characteristics of plasma-sprayed zirconia. Journal of Thermal Spray Technology, 16, 798-803(2007).

[18] L XIE, R DORFMAN M, A CIPITRIA et al. Properties and performance of high-purity thermal barrier coatings. Journal of Thermal Spray Technology, 16, 804-808(2007).

[19] A HELMINIAK M, M YANAR N, S PETTIT F et al. The behavior of high-purity, low-density air plasma sprayed thermal barrier coatings. Surface & Coatings Technology, 204, 793-796(2009).

[20] N MARKOCSAN, P NYLÉN, J WIGREN et al. Low thermal conductivity coatings for gas turbine applications. Journal of Thermal Spray Technology, 16, 498-505(2007).

[21] M ZHU D, A MILLER R. Development of advanced low conductivity thermal barrier coatings. International Journal of Applied Ceramic Technology, 1, 86-94(2004).

[22] L WANG, Y WANG, G SUN X et al. Influence of pores on the thermal insulation behavior of thermal barrier coatings prepared by atmospheric plasma spray. Materials and Design, 32, 36-47(2011).

[23] M ZHU D, A MILLER R. Thermal conductivity and elastic modulus evolution of thermal barrier coatings under high heat flux conditions. Journal of Thermal Spray Technology, 9, 175-180(2000).

[24] M ZHU D, A MILLER R, A NAGARAJ B et al. Thermal conductivity of EB-PVD thermal barrier coatings evaluated by a steady- state laser heat flux technique. Surface and Coatings Technology, 138, 1-8(2001).

[25] J LI Y, G YU Y, J JI X et al. Effects of Al₂O₃ content on properties of YSZ thermal barrier coatings. Thermal Spray Technology, 10, 61-67(2018).

[26] L GREMILLARD, T EPICIER, J CHEVALIER et al. Microstructural stucy of silica-doped zirconia ceramics. Acta Materialia, 48, 4647-4652(2000).

[27] B HODGSON S N, J CAWLEY, M CLUBLEY. The role of SiO₂ impurities in the microstructure and properties of Y-TZP. Journal of Materials Processing Technology, 86, 139-145(1999).

[28] K MATSUI, H YOSHIDA, Y IKUHARA. Phase-transformation and grain-growth kinetics in yttria-stabilized tetragonal zirconia polycrystal doped with a small amount of alumina. Journal of the European Ceramic Society, 30, 1679-1690(2010).

[29] Y SAKKA, T ISHII, S SUZUKI T et al. Fabrication of high-strain rate superplastic yttria-doped zirconia polycrystals by adding manganese and aluminum oxides. Journal of the European Ceramic Society, 24, 449-453(2004).

[30] X WU S, J BROOK R. Kinetics of densification in stabilized zirconia. Solid State Ionics, 14, 123-130(1984).