[1] Azarniya A, Taheri A K, Taheri K K. Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective[J]. Journal of Alloys and Compounds, 781, 945-983(2019).
[2] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).
[3] Oropeza D, Hofmann D C, Williams K et al. Welding and additive manufacturing with nanoparticle-enhanced aluminum 7075 wire[J]. Journal of Alloys and Compounds, 834, 154987(2020).
[4] Huo W T, Sun T T, Lei C X et al. Research progress on formability of high-strength 7000(Al-Zn-Mg-Cu) series aluminum alloy[J]. Materials China, 39, 924-933(2020).
[5] Zhao H, Gault B, Ponge D et al. Parameter free quantitative analysis of atom probe data by correlation functions: application to the precipitation in Al-Zn-Mg-Cu[J]. Scripta Materialia, 154, 106-110(2018).
[6] Wang J. Effect of high temperature pre-precipitation and Cu content on microstructure and properties of 7 series aluminum alloy[D](2022).
[7] Chen X, Li M N, Bu H Y et al. Research status and progress on the welding technologies of 7XXX series aluminum alloy[J]. Materials Reports, 37, 200-208(2023).
[8] Zhang L, Li X Y, Nie Z R et al. Comparison of microstructure and mechanical properties of TIG and laser welding joints of a new Al-Zn-Mg-Cu alloy[J]. Materials & Design, 92, 880-887(2016).
[9] Hayat F. Electron beam welding of 7075 aluminum alloy: microstructure and fracture properties[J]. Engineering Science and Technology, 34, 101093(2022).
[10] Christy J V, Mourad A H I, Sherif M M et al. Review of recent trends in friction stir welding process of aluminum alloys and aluminum metal matrix composites[J]. Transactions of Nonferrous Metals Society of China, 31, 3281-3309(2021).
[11] Luo G Y, Cheng M P, Liu C H et al. Improving mechanical properties of quasi-continuous-wave laser beam welded 7075 aluminum alloy through microstructural refinement and homogenization of the fusion zone[J]. Optics & Laser Technology, 153, 108221(2022).
[12] Mi G Y, Jiang Y M, Wang C M et al. New insight into microstructure and mechanical properties of heterostructures 7075 Al joint prepared via single mode laser welding[J]. Journal of Materials Research and Technology, 24, 463-474(2023).
[13] Zhao H, Chakraborty P, Ponge D et al. Hydrogen trapping and embrittlement in high-strength Al alloys[J]. Nature, 602, 437-441(2022).
[14] Lü X R, Liu T T, Liao W H et al. Elimination and quality control of melting and solidification cracks in laser powder bed of high strength aluminum alloy 7075[J]. Chinese Journal of Lasers, 49, 1402209(2022).
[15] Hu Y N, Wu S C, Shen Z et al. Fine equiaxed zone induced softening and failure behavior of 7050 aluminum alloy hybrid laser welds[J]. Materials Science and Engineering: A, 821, 141597(2021).
[16] Hu Y N, Wu S C, Guo Y et al. Inhibiting weld cracking in high-strength aluminium alloys[J]. Nature Communications, 13, 5816(2022).
[17] Sun W, Zhu Y, Marceau R et al. Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity[J]. Science, 363, 972-975(2019).
[18] Zhang J H, Hu Z L. Microstructural thermal stability of aluminum alloy friction stir welding joint[J]. Journal of Mechanical Engineering, 58, 73-80(2022).
[19] Li S R. Study on laser swing welding technology of medium and heavy plate aluminum alloy[D](2020).
[20] Wang L, Gao M, Zhang C et al. Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy[J]. Materials & Design, 108, 707-717(2016).
[21] Liu T T, Mu Z Y, Hu R Z et al. Sinusoidal oscillating laser welding of 7075 aluminum alloy: hydrodynamics, porosity formation and optimization[J]. International Journal of Heat and Mass Transfer, 140, 346-358(2019).
[22] Lei Z L, Bi S Y, Zhang X R et al. Microstructure and mechanical properties of double-sided laser swing welding of 2195 Al-Li alloy T-joints[J]. Chinese Journal of Lasers, 49, 0802003(2022).
[23] Chen L. Study on forming mechanism and molten pool behavior of laser swing lap weld of aluminum alloy sheet[D](2022).
[24] Chen L, Wang C M, Mi G Y et al. Effects of laser oscillating frequency on energy distribution, molten pool morphology and grain structure of AA6061/AA5182 aluminum alloys lap welding[J]. Journal of Materials Research and Technology, 15, 3133-3148(2021).
[25] Sokoluk M, Cao C Z, Pan S H et al. Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075[J]. Nature Communications, 10, 98(2019).
[26] Wang Z P, Wang M L, Li Y G et al. Effect of pretreatment on microstructural stability and mechanical property in a spray formed Al-Zn-Mg-Cu alloy[J]. Materials & Design, 203, 109618(2021).
[27] Chen X M, Wang X N, Yan Q et al. Effect of nickle foil on microstructure properties of DP980/A6061 dissimilar laser welded joints[J]. Chinese Journal of Lasers, 45, 1102002(2018).
[28] Guo H P, Chen C, Yang Y J et al. Experimental study on corrosion of TA1 titanium foil by pickling[J]. Failure Analysis and Prevention, 15, 297-300(2020).
[29] Li H L, He T, Huo Y M et al. Fracture analysis of ductile fracture of AA6063 aluminum alloy[J]. Journal of Shanghai University of Engineering Science, 35, 197-200(2021).
[30] Wang R. Failure analysis of mechanical equipment (continued): lecture 3 fracture analysis technology (part 1)[J]. Physical Testing and Chemical Analysis (Part A: Physical Testing), 52, 833-840(2016).
[31] Xue Q S, Chen L, Ni B et al. Dispersion of metal supported catalysts by combination of backscattered electron imaging and energy dispersive spectroscopy[J]. Journal of Analytical Science, 38, 237-242(2022).
[32] Zhu Z W. Study on laser-arc hybrid welding technology and mechanism of medium and heavy plate under longitudinal magnetic field[D](2021).