Effect of Wavelength on Droplet Transition Behaviors in Laser-CMT Hybrid Welding Process

Lei Zhenglong; Li Bingwei; Zhu Pingguo; Lu Wei; Xing Xixue

doi:10.3788/cjl201845.1002006

[1] Steen W M. Arc augmented laser processing of materials[J]. Journal of Applied Physics, 51, 5636-5641(1980). http://scitation.aip.org/content/aip/journal/jap/51/11/10.1063/1.327560

[2] Cui X M, Li L H, Zhang Y H. Welding with laser-arc compound heat source[J]. Welding Technology, 32, 19-21(2003).

[3] Pinto H, Pyzalla A, Hackl H, residual stresses of CMT- et al[J]. MIG, laser-hybrid welds. Materials Science Forum, 524/525, 627-632(2006).

[4] Pickin C G, Young K. Evaluation of cold metal transfer (CMT) process for welding aluminium alloy[J]. Science & Technology of Welding & Joining, 11, 583-585(2006). http://www.tandfonline.com/doi/abs/10.1179/174329306X120886

[5] Zhu Y H, Geng Z Q. Limitation of sheet metal welding: CMT cool metal transition technique[J]. Electric Welding Machine, 41, 69-71(2011).

[6] Li M, Zhang W, Hua X M et al. Investigation of plasma and metal transfer dynamic behavior during fiber laser GMAW-P hybrid welding[J]. Chinese Journal of Lasers, 44, 0402008(2017).

[7] Hu L H, Huang J, Wu Y X et al. Study on coupling mechanism and metal transfer in laser double-wire MIG arc hybrid welding[J]. Chinese Journal of Lasers, 43, 0602005(2016).

[8] Lamas J, Frostevarg J. Kaplan A F H. Gap bridging for two modes of laser arc hybrid welding[J]. Journal of Materials Processing Technology, 224, 73-79(2015). http://www.sciencedirect.com/science/article/pii/S0924013615001880

[9] Frostevarg J. Comparison of three different arc modes for laser-arc hybrid welding steel[J]. Journal of Laser Applications, 28, 022407(2016). http://scitation.aip.org/content/lia/journal/jla/28/2/10.2351/1.4944098

[10] Lei Z, Lin S Y, Wang X Y et al[J]. A welding technology of laser-digital controlled short circuiting transfer arc hybrid welding: A new high-efficient welding technology replaced TIG welding filler wire Welding & Joining, 2009, 23-26.

[11] Lei Z, Wang X Y, Wang W et al[J]. Laser-CMT hybrid welding with argon as shielding gas for 304 stainless steel Welding & Joining, 2010, 18-22.

[12] Gao M, Chen C, Gu Y Z et al. Microstructure and tensile behavior of laser arc hybrid welded dissimilar Al and Ti alloys[J]. Materials, 7, 1590-1602(2014). http://europepmc.org/abstract/MED/28788533

[13] Zhang C, Li G, Gao M et al. Microstructure and process characterization of laser-cold metal transfer hybrid welding of AA6061 aluminum alloy[J]. International Journal of Advanced Manufacturing Technology, 68, 1253-1260(2013).

[14] Guo L. Characteristics of the vapor/plasmas induced during laser welding of typical aeronautical materials[D]. Wuhan: Wuhan University of Technology(2008).

[15] Singh N, Razafinimanana M, Gleizes A. The effect of pressure on a plasma plume: Temperature and electron density measurements[J]. Journal of Physics D: Applied Physics, 31, 2921-2928(1998). http://adsabs.harvard.edu/abs/1998JPhD...31.2921S