• Photonic Sensors
  • Vol. 7, Issue 2, 182 (2017)
Lokendra SING, Amna BED, and Santosh KUMAR*
Author Affiliations
  • Photonics Lab, Department of Electronics and Communication Engineering, DIT University, Dehradun-248009, India
  • show less
    DOI: 10.1007/s13320-017-0365-9 Cite this Article
    Lokendra SING, Amna BED, Santosh KUMAR. Modeling of All-Optical Even and Odd Parity Generator Circuits Using Metal-Insulator-Metal Plasmonic Waveguides[J]. Photonic Sensors, 2017, 7(2): 182 Copy Citation Text show less
    References

    [1] W. Wei, X. Zhang, and X. Ren, “Asymmetric hybrid plasmonic waveguide with centimetric scale propagation length under subwavelength confinement for photonic components,” Nanoscale Research Letters, 2014, 9(1): 1 8.

    [2] W. L. Barnes, A. Dereux, and W. E. Thomas, “Surface plasmon subwavelength optics,” Nature, 2003, 424(6950): 824 830.

    [3] D. K. Gramotnev and S. I. Bozhelvonyi, “Plasmonics beyond the diffraction limit,” Nature Photonics, 2010, 4(2): 83 91.

    [4] Y. Chen and H. Ming, “Review of surface plasmon resonance and localized surface plasmon resonance sensor,” Photonic Sensors, 2012, 2(1): 37 49.

    [5] G. Veronis and S. H. Fan, “Guided subwavelength plasmonic mode supported by a slot in a thin metal film,” Optics Letters, 2005, 30(24): 3359 3361.

    [6] L. Liu, H. Zhanghua, and H. Sailing, “Novel surface plasmon waveguide for high integration,” Optics Express, 2015, 13(17): 6645 6650.

    [7] A. Boltasseva, S. V. Valentyn, B. N. Rasmus, M. Esteban, G. R. Sergio, and I. B. Sergey, “Triangular metal wedges for subwavelength plasmon polariton guiding at telecom wavelengths,” Optics Express, 2008, 16(8): 5252 5260.

    [8] A. Kumar, J. Gosciniak, V. S. Volkov, S. Papaioannou, D. Kalavrouziotis, K. Vyrsokinos, et al., “Dielectric-loaded plasmonic waveguide components: going practical,” Laser & Photonics Reviews, 2013, 7(6): 938 951.

    [9] W. L. Barnes, A. Dereux, and T. W. Ebbeen, “Surface plasmon subwavelength optics,” Nature, 2003, 424(6950): 824 830.

    [10] R. Charbonneau, N. Lahoud, G. Mattiussi, and P. Berini, “Demonstration of integrated optics elements based on long-ranging surface plasmon polaritons,” Optics Express, 2005, 13(3): 977 984.

    [11] L. Liu, Z. Han, and S. He, “Novel surface plasmon waveguide for high integration,” Optics Express, 2005, 13(17): 6645 6650.

    [12] J. A. Dionne, L. A. Sweatlock, H. A. Atwater, and A. Polman, “Plasmon slot waveguides: towards chip-scale propagation with subwavelength scale localization,” Physical Review B, 2006, 73(3): 035407-9.

    [13] G. Veronis and S. Fan, “Modes of subwavelength plasmonic slot waveguides,” Journal of Lightwave Technology, 2007, 25(9): 2511 2521.

    [14] F. Lou, Z. Wang, D. Dai, L. Tylen, and L. Wousnski, “Experimental demonstration of ultra-compact directional couplers based on silicon hybrid plasmonic waveguides,” Applied Physics Letters, 2012, 100(24): 241105-1 241105-4.

    [15] M. Z. Alam, J. N. Caspers, J. S. Aitchison, and M. Mojahedi, “Compact low loss and broadband hybrid plasmonic directional coupler,” Optics Express, 2013, 21(13): 16029 16034.

    [16] D. K. Gramotnev, K. C. Vernon, and D. F. P. Pile, “Directional coupler using gap plasmon waveguides,” Applied Physics B, 2008, 93(1): 99 106.

    [17] Q. Li, Y. Song, G. Zhou, Y. Su, and M. Qiu, “Asymmetric plasmonic-dielectric coupler with short coupling length, high extinction ratio, and low insertion loss,” Optics Letters, 2010, 35(19): 3153 3155.

    [18] P. Jia, G. Fang, and D. Wang, “Characterization of miniature fiber-optic Fabry-Perot interferometric sensors based on hollow silica tube,” Photonic Sensors, 2016, 6(3): 193 198.

    [19] M. A. Bader, G. Marowsky, A. Bahtiar, K. Koynov, C. Bubeck, H. Tillmann, et al., “Poly (p-phenylenevinylene) derivatives: new promising materials for nonlinear all-optical waveguide switching,” Journal of the Optical Society of America B, 2002, 19(9): 2250 2262.

    [20] S. Kumar, Chanderkanta, and A. Amphawan, “Design of parity generator and checker circuit using electro-optic effect of Mach-Zehnder interferomenters,” Optics Communications, 2016, 364: 195 224.

    [21] L. Wang, Y. Wang, C. Wu, and F. Wang, “All-optical flip-flop based on coupled SOA-PSW,” Photonic Sensors, 2016, 6(4): 366 371.

    [22] X. S. Christina and A. P. Kabilan, “Design of optical logic gates using self-collimated beams in 2d photonic crystal,” Photonic Sensors, 2012, 2(2): 173 179.

    [23] J. A. Pereda, A. Vegas, and A. Prieto, “An improved compact 2D full-wave FDTD method for general guided wave structures microwave,” Microwave & Optical Technology Letters, 2003, 38(4): 331 335.

    [24] S. Kumar, L. Singh, S. K. Raghuwanshi, and N. K. Chen, “Design of full-adder and full-subtractor using metal-insulator-metal plasmonic waveguides” Plasmonics, 2016, 11: 1 11.

    [25] S. Kumar, L. Singh, and S. Swarnakar, “Design of one bit magnitude comparator using nonlinear plasmonic waveguide,” Plasmonics, 2016, 11: 1 7.

    [26] S. Kumar and L. Singh, “Proposed new approach to design all optical AND gate using plasmonic based Mach-Zehnder interferometer for high speed communication,” SPIE, 2016, 9884: 98842D.

    [27] S. K. Raghuwanshi, A. Kumar, and S. Kumar, “1×4 signal router using three Mach-Zhender interferometers,” Optical Engineering, 2013, 52(3): 035002-1 035002-9.

    [28] G. P. Agrawal, Nonlinear fiber optics. Salt Lake City: Academic Press, 2006.

    Lokendra SING, Amna BED, Santosh KUMAR. Modeling of All-Optical Even and Odd Parity Generator Circuits Using Metal-Insulator-Metal Plasmonic Waveguides[J]. Photonic Sensors, 2017, 7(2): 182
    Download Citation