Effect of Typical Laser Parameters on Micro-Dimple Geometry of High-Silicon Aluminum Alloy Cylinder Liner Surface

Jiafei Lü; Xiaoguang Han; Dong He; Fengming Du; Yuzhen Chen; Jiujun Xu

doi:10.3788/LOP57.131402

[1] Hamilton D B, Walowit J A, Allen C M. A theory of lubrication by micro irregularities[J]. Journal of Basic Engineering, 88, 177-185(1966).

[2] Shi C C, Yu A B, Wu J Z et al. Comparisons of tribological properties between laser and drilled dimple textured surfaces of medium carbon steel[J]. Industrial Lubrication and Tribology, 69, 516-526(2017).

[3] Greco A, Martini A, Liu Y C et al. Rolling contact fatigue performance of vibro-mechanical textured surfaces[J]. Tribology Transactions, 53, 610-620(2010).

[4] Parreira J G, Gallo C A, Costa H L. New advances on mask less electrochemical texturing (MECT) for tribological purposes[J]. Surface and Coatings Technology, 212, 1-13(2012).

[5] Vilhena L M. Sedla ek M, Podgornik B, et al. Surface texturing by pulsed Nd∶YAG laser[J]. Tribology International, 42, 1496-1504(2009).

[6] Ahmmed K, Grambow C, Kietzig A M. Fabrication of micro/nano structures on metals by femtosecond laser micromachining[J]. Micromachines, 5, 1219-1253(2014).

[7] Vincent C, Monteil G, Barriere T et al. Control of the quality of laser surface texturing[J]. Microsystem Technologies, 14, 1553-1557(2008).

[8] Park S J, Norton D P. Ion beam assisted texturing of polycrystalline Y2O3 films deposited via electron-beam evaporation[J]. Thin Solid Films, 510, 143-147(2006).

[9] Zheng X H, Song H, Zhang Q et al. Effect of laser surface texturing on tribological properties of materials: a review[J]. Materials Review, 31, 68-74(2017).

[10] Segu D Z, Kim J H, Choi S G et al. Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface[J]. Surface and Coatings Technology, 232, 504-514(2013).

[11] Hua X J, Ge H Q, Fu Y H et al. Research on discriminating partition laser surface micro-texturing technology of engine cylinder[J]. Chinese Internal Combustion Engine Engineering, 36, 140-143(2015).

[12] Hua X J, Zhang J L, Xie X et al. Laser concave/convex micro-texture process of GCr15 bearing steel surface[J]. Chinese Journal of Lasers, 46, 0302009(2019).

[13] Ahuir-Torres J I, Arenas M A, Perrie W et al. Influence of laser parameters in surface texturing of Ti6Al4V and AA2024-T3 alloys[J]. Optics and Lasers in Engineering, 103, 100-109(2018).

[14] Zheng B X, Jiang G D, Wang W J et al. Ablation characteristics and interaction mechanism of ultra-fast pulse laser-induced damage in titanium alloy[J]. Journal of Xi'an Jiaotong University, 48, 21-28(2014).

[15] Fu Y H, Liu Q X, Ye Y X et al. Research on laser surface micro texturing processing of single pulse intervals[J]. Chinese Journal of Lasers, 42, 1203005(2015).

[16] Dwivedi D K. Adhesive wear behaviour of cast aluminium-silicon alloys: overview[J]. Materials & Design (1980-2015), 31, 2517-2531(2010).

[17] Li C D, Xu J Z, Shen Y et al. Effects of shaping silicon particles on friction and wear properties of Al-Si alloy plated cylinder liner[J]. China Surface Engineering, 29, 8-14(2016).

[18] Zhu F. Development of a contraposition reciprocating test rig for tribological study and friction & wear test[D]. Dalian: Dalian Maritime University(2011).

[19] Yu G, Yu H J[M]. Laser manufacturing process mechanics, 54-60(2012).

[20] Mannion P, Magee J, Coyne E et al. The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air[J]. Applied Surface Science, 233, 275-287(2004).

[21] Eichstädt J. Römer G R B E, Huis in ‘t Veld A J. Determination of irradiation parameters for laser-induced periodic surface structures[J]. Applied Surface Science, 264, 79-87(2013).

[22] Liu Q X. Pulsed laser surface ablation micro-texture process and laser system[D]. Zhenjiang: Jiangsu University, 35-40(2016).