[1] C TUCKER M. Progress in metal-supported solid oxide fuel cells: a review. Journal of Power Sources, 195, 4570-4582(2010).

[2] C ZHOU Y, F YE X, R WANG S. All symmetrical metal supported solid oxide fuel cells. Journal of Inorganic Materials, 31, 769-772(2016).

[3] S HUI, D YANG, Z Wang et al. Metal-supported solid oxide fuel cell operated at 400-600 ℃. Journal of Power Sources, 167, 336-339(2007).

[4] L ZHANG S, X YU H, X LI C et al. Thermally sprayed high performance porous metal-supported solid oxide fuel cells with nanostructured La_0.6Sr_0.4Co_0.2Fe_0.8O₃ cathodes. Journal of Materials Chemistry A, 4, 7461-7468(2016).

[5] C ZHOU Y, D SONG S, F HAN M. Development of metal- supported SOFC. Engineering Sciences, 15, 28-32(2013).

[6] M MORI, T YAMAMOTO, H ITOH et al. Thermal expansion of nickel-zirconia anodes in solid oxide fuel cells during fabrication and operation. Journal of Electrochemical Society, 145, 1374-1381(1998).

[7] Y WANG, W JIANG, Y LUO et al. Evolution of thermal stress and failure probability during reduction and reoxidation of solid oxide fuel cell. Journal of Power Sources, 371, 65-76(2017).

[8] M XIE J, H WANG F. Thermal stress analysis of solid oxide fuel cell with anode functional layer. Journal of Inorganic Materials, 32, 400-406(2017).

[9] M SAIED, K AHMED, M AHMED et al. Investigations of solid oxide fuel cells with functionally graded electrodes for high performance and safe thermal stress. International Journal of Hydrogen Energy, 42, 15887-15902(2017).

[10] S CELIK, B IBRAHIMOGLU, M MAT et al. Micro level two dimensional stress and thermal analysis anode/electrolyte interface of a solid oxide fuel cell. International Journal of. Hydrogen Energy., 40, 7895-7902(2015).

[11] B CHARLAS, L FRANDSEN H, K BRODERSEN et al. Residual stresses and strength of multilayer tape cast solid oxide fuel and electrolysis half-cells. Journal of Power Sources, 288, 243-252(2015).

[12] J VILLANOVA, O SICARDY, R FORTUNIER et al. Determination of global and local residual stresses in SOFC by X-ray diffraction. Nuclear Instruments and Methods in Physics Research B, 268, 282-286(2010).

[13] J MALZBENDER, RW STEINBRECH, L SINGHEISER. A review of advanced techniques for characterising SOFC behaviour. Fuel Cells, 9, 785-793(2009).

[14] M ZENG S, J PARBEY, S YU G et al. Thermal stress analysis of sulfur deactivated solid oxide fuel cells. Journal of Power Sources, 379, 134-143(2018).

[15] P WANG K, Y HUANG Y, A CHANDRA et al. Interfacial shear stress, peeling stress, and die cracking stress in trilayer electronic assemblies. IEEE Transactions on Components and Packaging Technologies, 23, 309-316(2000).

[16] L LIU, Y KIM G, A CHANDRA. Modeling of thermal stresses and lifetime prediction of planar solid oxide fuel cell under thermal cycling conditions. Journal of Power Sources, 195, 2310-2318(2010).

[17] R CLAGUE, J MARQUIS A, P BRANDON N. Finite element and analytical stress analysis of a solid oxide fuel cell. Journal of Power Sources, 210, 224-232(2012).

[18] L DAMM D, G FEDOROY A. Reduced-order transient thermal modeling for SOFC heating and cooling. Journal of Power Sources, 159, 956-967(2006).

[19] A HAJIMOLANA S, M TONEKABONIMAOGHADAM S, A HUSSAIN M et al. Thermal stress management of a solid oxide fuel cell using neural network predictive control. Energy, 62, 320-329(2013).

[20] K CHIANG L, C LIU H, H SHIU Y et al. Thermo-electrochemical and thermal stress analysis for an anode-supported SOFC cell. Renew Energy, 33, 2580-2588(2008).

[21] S VAIDYA, H KIM J. Finite element thermal stress analysis of solid oxide fuel cell cathode microstructures. Journal of Power Sources, 225, 269-276(2013).

[22] S ZENG, M XU, J PARBEY et al. Thermal stress analysis of a planar anode-supported solid oxide fuel cell: effects of anode porosity. Internal Journal of Hydrogen Energy, 42, 20239-20248(2017).

[23] K LI, X WANG, C JIA L et al. High performance Ni-Fe alloy support SOFCs fabricated by low cost tape casting-screen printing- cofiring process. International Journal of Hydrogen Energy, 39, 19747-19752(2014).

[24] W JU Y, H ETO, T INAGAKI et al. Preparation of Ni-Fe bimetallic porous anode support for solid oxide fuel cells using LaGaO₃ based electrolyte film with high power density. Journal of Power Sources, 195, 6294-6300(2010).

[25] L ZHU T, J DU X, F BU Y et al. Validation and electrochemical characterization of LSCF cathode deposition on metal supported SOFC. Journal of the Electrochemical Society, 164, 1489-1494(2017).

[26] Y KONG, B HUA, J PU et al. A cost-effective process for fabrication of metal-supported solid oxide fuel cells. International Journal of Hydrogen Energy, 35, 4592-4596(2010).

[27] X WANG, K LI, C JIA L et al. Porous Ni-Fe alloys as anode support for intermediate temperature solid oxide fuel cells: I. Fabrication, redox and thermal behaviors. Journal of Power Sources, 277, 474-479(2015).

[28] K LI, C JIA L, X WANG et al. Methane on-cell reforming in nickel-iron alloy supported solid oxide fuel cells. Journal of Power Sources, 284, 446-451(2015).

[29] K LI, C JIA L, X WANG et al. Enhanced methane steam reforming activity and electrochemical performance of Ni_0.9Fe_0.1- supported solid oxide fuel cells with infiltrated Ni-TiO₂ particles. Scientific Reports, 6(2016).

[30] L MENG, Z WANG F, A WANG et al. High performance La_0.8Sr_0.2MnO₃-coated Ba_0.5Sr_0.5Co_0.8Fe_0.2O₃ cathode prepared by a novel solid-solution method for intermediate temperature solid oxide fuel cells. Chinese Journal of Catalysis, 35, 38-42(2014).

[31] H MOON, S KIM, S HYUN et al. Development of IT-SOFC unit cells with anode-supported thin electrolytes via tape casting and co-firing. International Journal of Hydrogen Energy, 33, 1758-1768(2008).

[32] TT MOLLA, R BJØRK, E OLEVSKY et al. Multi-scale modeling of shape distortions during sintering of bilayers. Computational Materials Science, 88, 28-36(2014).