[1] A ZOCCA, P COLOMBO, C M GOMES et al. Additive manufacturing of ceramics: issues, potentialities, and opportunities. Journal of the American Ceramic Society(2015).
[2] A BAUX, S JACQUES, A ALLEMAND et al. Complex geometry macroporous SiC ceramics obtained by 3D-printing, polymer impregnation and pyrolysis (PIP) and chemical vapor deposition (CVD). Journal of the European Ceramic Society(2021).
[3] T SHEN, H XIONG, Z LI et al. Fused deposition fabrication of high-quality zirconia ceramics using granular feedstock. Ceramics International(2021).
[4] A CHEN, J SU, Y LI et al. 3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering. International Journal of Extreme Manufacturing, 032007(2023).
[5] A SHAHZAD, I LAZOGLU. Direct ink writing (DIW) of structural and functional ceramics: recent achievements and future challenges. Composites Part B: Engineering(2021).
[6] Q JIANG, D YANG, H YUAN et al. Fabrication and properties of Si2N2O-Si3N4 ceramics
[7] S S HOSSAIN, K LU. Recent progress of alumina ceramics by direct ink writing: ink design, printing and post-processing. Ceramics International(2023).
[8] J TANG, H CHANG, X GUO et al. Preparation of carbon fiber- reinforced SiC ceramics by stereolithography and secondary silicon infiltration. Ceramics International(2022).
[9] X BAI, G DING, K ZHANG et al. Stereolithography additive manufacturing and sintering approaches of SiC ceramics. Open Ceramics(2021).
[10] R HE, N ZHOU, K ZHANG et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics(2021).
[11] H HASSANIN, K ESSA, A ELSHAER et al. Micro-fabrication of ceramics: additive manufacturing and conventional technologies. Journal of Advanced Ceramics(2021).
[12] X CHEN, J YIN, L HUANG et al. Microstructural tailoring, mechanical and thermal properties of SiC composites fabricated by selective laser sintering and reactive melt infiltration. Journal of Advanced Ceramics(2023).
[13] T D NGO, A KASHANI, G IMBALZANO et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Composites Part B: Engineering(2018).
[14] H MEI, Y YAN, L FENG et al. First printing of continuous fibers into ceramics. Journal of the American Ceramic Society(2019).
[15] F F LI, N N MA, J CHEN et al. SiC ceramic mirror fabricated by additive manufacturing with material extrusion and laser cladding. Additive Manufacturing(2022).
[16] J WEN, T ZENG, X PAN et al. Effect of solid loading and carbon additive on microstructure and mechanical properties of 3D-printed SiC ceramic. International Journal of Applied Ceramic Technology(2022).
[17] H XIONG, H CHEN, L ZHAO et al. SiCw/SiCp reinforced 3D-SiC ceramics using direct ink writing of polycarbosilane-based solution: microstructure, composition and mechanical properties. Journal of the European Ceramic Society(2019).
[18] Y XIA, Z LU, J CAO et al. Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing. Scripta Materialia(2019).
[19] Y LIU, Y CHENG, D MA et al. Continuous carbon fiber reinforced ZrB2-SiC composites fabricated by direct ink writing combined with low-temperature hot-pressing. Journal of the European Ceramic Society(2022).
[20] Z LI, Z CHEN, J LIU et al. Additive manufacturing of lightweight and high-strength polymer-derived SiOC ceramics. Virtual and Physical Prototyping(2020).
[21] Z C ECKEL, C ZHOU, J H MARTIN et al. Additive manufacturing of polymer-derived ceramics. Science(2016).
[22] S FU, M ZHU, Y ZHU. Organosilicon polymer-derived ceramics: an overview. Journal of Advanced Ceramics(2019).
[23] J TANG, X GUO, H CHANG et al. The preparation of SiC ceramic photosensitive slurry for rapid stereolithography. Journal of the European Ceramic Society(2021).
[24] T LIU, L YANG, Z CHEN et al. Effects of SiC content on the microstructure and mechanical performance of stereolithography-based SiC ceramics. Journal of Materials Research and Technology(2023).
[25] X FU, D HUCK, L MAKEIN et al. Effect of particle shape and size on flow properties of lactose powders. Particuology(2012).
[26] H LU, X GUO, Y LIU et al. Effect of particle size on flow mode and flow characteristics of pulverized coal. KONA Powder and Particle Journal(2015).
[27] P JULIANO, B MUHUNTHAN, G V BARBOSA-CÁNOVAS. Flow and shear descriptors of preconsolidated food powders. Journal of Food Engineering(2006).
[28] M KRANTZ, H ZHANG, J ZHU. Characterization of powder flow: static and dynamic testing. Powder Technology(2009).
[29] A SCHÜSSELE, A BAUER-BRANDL. Note on the measurement of flowability according to the European Pharmacopoeia. International Journal of Pharmaceutics(2003).
[30] S WU, L YANG, C WANG et al. Si/SiC ceramic lattices with a triply periodic minimal surface structure prepared by laser powder bed fusion. Additive Manufacturing(2022).
[31] X CHEN, J YIN, X LIU et al. Effect of laser power on mechanical properties of SiC composites rapidly fabricated by selective laser sintering and direct liquid silicon infiltration. Ceramics International(2022).
[32] P POPPER, D G S DAVIES. The preparation and properties of self-bonded silicon carbide. Powder Metallurgy(1961).
[33] S HAYUN, N FRAGE, M P DARIEL. The morphology of ceramic phases in B
[37] S LI, Y ZHANG, J HAN et al. Random chopped fibers in reaction bonded SiC composite: morphology, etching and reinforcing properties. Materials Science and Engineering: A(2012).
[39] Q WU, C YANG, H ZHANG et al. Fabrication and characterization of reaction-bonded silicon carbide with poly(methyl methacrylate) as pore-forming agent. Ceramics International(2013).
[40] K LIU, J WANG, T WU et al. Effects of carbon content on microstructure and mechanical properties of SiC ceramics fabricated by SLS/RMI composite process. Ceramics International, 22015(2020).
[41] M PELANCONI, P COLOMBO, A ORTONA. Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis. Journal of the European Ceramic Society(2021).
[42] H ZHONG, Z WANG, H ZHOU et al. Properties and microstructure evolution of Cf/SiC composites fabricated by polymer impregnation and pyrolysis (PIP) with liquid polycarbosilane. Ceramics International(2017).
[43] Y ZOU, C H LI, Y TANG et al. Preform impregnation to optimize the properties and microstructure of RB-SiC prepared with laser sintering and reactive melt infiltration. Journal of the European Ceramic Society(2020).
[44] H ZHAO, W LIU, X LV et al. β-SiC nano-particles enhanced thermal conductivity of pressureless solid-phase sintering SiC. Ceramics International(2024).
[45] K WANG, J YIN, X CHEN et al. Microstructure and properties of liquid phase sintered SiC ceramics fabricated
[46] Y XING, H WU, X LIU et al. Grain Composition on solid-state-sintered SiC ceramics. Journal of Inorganic Materials(2018).
[47] P T B SHAFFER. The SiC phase in the system SiC-B4C-C. Materials Research Bulletin(1969).
[48] E R MADDRELL. Pressureless sintering of silicon carbide. Journal of Materials Science Letters(1987).
[49] K WANG, J YIN, X CHEN et al. Effect of particle grading on properties of silicon carbide ceramics by selective laser printing combined with solid phase sintering at atmospheric pressure. Journal of Inorganic Materials(2024).
[51] W D KINGERY. Densification during sintering in the presence of a liquid phase. I. Theory. Journal of Applied Physics(1959).
[52] R M GERMAN, P SURI, S J PARK. Review: liquid phase sintering. Journal of Materials Science(2009).
[53] K BISWAS, G RIXECKER, F ALDINGER. Gas pressure sintering of SiC sintered with rare-earth-(III)-oxides and their mechanical properties. Ceramics International(2005).
[54] S N PEREVISLOV. Mechanism of liquid-phase sintering of silicon carbide and nitride with oxide activating additives. Glass and Ceramics(2013).
[56] R LIU, F WANG, J ZHANG et al. Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes. Ceramics International(2021).
[57] K TERRANI, B JOLLY, M TRAMMELL. 3D printing of high-purity silicon carbide. Journal of the American Ceramic Society(2020).
[58] H FU, W ZHU, Z XU et al. Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared
[59] C WANG, X CHEN, Z WANG et al. A novel mullite anti-gyroid/SiC gyroid ceramic metastructure based on digital light processing 3D printing with enhanced electromagnetic wave absorption and mechanical properties. Journal of Advanced Ceramics(2024).
[60] F LI, M ZHU, J CHEN et al. High-strength and low-silicon SiC ceramics prepared by extrusion molding 3D printing. Journal of the European Ceramic Society(2024).
