Single-mode Photonic Crystal Fiber with a Large Core

[in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]

Journals >Chinese Journal of Lasers >Volume 30 >Issue 10 >Page 901 > Article

Chinese Journal of Lasers
Vol. 30, Issue 10, 901 (2003)

Single-mode Photonic Crystal Fiber with a Large Core

[in Chinese]^1、*, [in Chinese]¹, [in Chinese]¹, [in Chinese]¹, [in Chinese]², [in Chinese]², and [in Chinese]²

Author Affiliations

¹[in Chinese]

²[in Chinese]

show less

DOI: Cite this Article Set citation alerts

[in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Single-mode Photonic Crystal Fiber with a Large Core[J]. Chinese Journal of Lasers, 2003, 30(10): 901 Copy Citation Text

show less

Abstract

A photonic crystal fiber was fabricated by drawing milled silica rods. It consisted of a pure silica core with a diameter of 30μm, which was surrounded by two rings of air holes with a hexagonal symmetry, the hole diameter and the spacing between holes were 4 μm and 17 μm, respectively. Simulation and experiments showed that this fiber was single mode for wavelength beyond 632 8 nm.

Keywords

orthogonal functions photonic crystal fiber single mode waveguide optics

[in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Single-mode Photonic Crystal Fiber with a Large Core[J]. Chinese Journal of Lasers, 2003, 30(10): 901

Download Citation

Set citation alerts for the article

Tools

Set citation alerts for the article

Save the article for my favorites

Paper Information