[1] Y H Yuan, C L Liu, C Y Wang, et al. Analysis on temperature rise and its rate of coated 45# steel irradiated by CW-YAG laser. High Power Laser and Particle Beams, 10, 61-64(1998).
[2] O U Khan, B Yilbas. Laser heating of sheet metal and thermal stress development.. Journal of Materials Processing Technology, 155, 2045-2050(2004).
[3] Y Qin, J Bi, X W Ni, et al. Analysis and experiment on millisecond pulsed laser drilling of metals. Optics and Precision Engineering, 19, 340-347(2011).
[4] C Li, X Gao, Y Z Anliang, et al. Thermal properties of aluminum target irradiated by combined CW/pulsed laser beam. Journal of Changchun University of Science and Technology(Natural Science Edition), 41, 1-6(2018).
[5] M Y Li, J J Ye, C H Yu, et al. Experimental study on propulsive performance of typical metal ablated by nanosecond pulse width laser. Infrared and Laser Engineering, 49, 20200086(2012).
[6] L G Jiao, G M Zhao, H M Jiang. Irradiation effects of laser on typical metal targets under tangential airflow. Chinese Optics, 4, 77-81(2011).
[7] Y L Zheng, T J Du, Q B Shu, et al. Numerical simulation of thermal effect on metal irradiated by high-power laser beam in different airflow. High Power Laser and Particle Beams, 22, 2531-2534(2010).
[8] Yuan C. The 45# Steel interaction with the DF laser beam in different gas flow[D]. Changsha: National University of Defense Technology, 2011. (in Chinese)
[9] J S Li, G M Zhao, G L Jiao, et al. Preliminary study on effects of laser irradiation on thin aluminum alloy sheet in tangential flow. Infrared and Laser Engineering, 42, 2962-2966(2013).
[10] W Meng, W J Zhang, Y X Li, et al. Thermal ablation law of laser irradiation on nylon materials under tangential airflow. Optics and Precision Engineering, 25, 351-357(2017).
[11] E H Amara, K Kheloufi, T Tamsaout, et al. Numerical investigations on high-power laser cutting of metals. Applied Physics A, 119, 1245-1260(2015).
[12] D L Zhang, X J Song, L Ding, et al. Simulation of thermal ablation of rolling target irradiated by laser under tangential air flow. Laser & Infrared, 47, 261-266(2017).
[13] F Liu, G L Peng, T J Du. Influence of tangential airflows on burn-througheffect with no-melting of metal heated by laser. Chinese Optics, 6, 332-342(2013).
[14] L Zhang, Y Q Zhang, J He, et al. Numerical simulation of metallic honeycomb plates with energy addition in high velocity flow. High Power Laser and Particle Beams, 29, 28-32(2017).
[15] S M Baumann, B E Hurst, M A Marciniak, et al. Fiber laser heating and penetration of aluminum in shear flow. Optical Engineering, 53, 122510(2014).
