[1] W Andure M, Jirapure S C, Dhamande L P. Advance automobile material for light weight material future—A review. IJCA Proceedings on International Conference on Benchmarks in Engineering Science and Technology, 15-22(2012).

[2] L Berzi, M Delogu M. Pierini. Development of driving cycles for electric vehicles in the context of the city of Florence. Transportation Research Part D: Transport and Environment, 47, 299-322(2016).

[3] K Bhattacharyya S. Smarter-lighter-greener: Research innovations for the automotive sector. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. DOI:(2015).

[4] M Boureghda, R Fegas, K Louhab. Study of the environmental impacts of urban wastewater recycling (case of boumerdes-Algeria) by the life cycle assessment method. Asian Journal of Chemistry, 24, 339-344(2012).

[5] C Caffrey, Bolon K, Kolwich G et al. Cost-effectiveness of a lightweight design for 2020-2025: An assessment of a light-duty pickup truck. SAE Technical Paper., 1-3(2015).

[6] S Cecchel, D Chindamo, M Collotta. Lightweighting in light commercial vehicles: Cradle-to-grave life cycle assessment of a safety-relevant component. The International Journal of Life Cycle Assessment, 23, 2043-2054(2018).

[7] A Cherifi, N Kihal, M Gardoni et al. The life cycle analysis applied to determine environmental impacts in the pharmaceutical industry. PICMET’12 Conference, Vancouver, Canada.(2012).

[8] E Cischino, F Di Paolo, E Mangino et al. An advanced technological lightweighted solution for a body in white. Transportation Research Procedia, 14, 1021-1030(2016).

[9] M Delogu, F Del Pero, M Pierini. Lightweight design solutions in the automotive field: Environmental modelling based on fuel reduction value applied to diesel turbocharged vehicles. Sustainability, 1-3(2016).

[10] E Dubem. Composite materials literature review for car bumper(2016).

[11] R Duflou J, J De Moor, I Verpoest et al. Environmental impact analysis of composite use in car manufacturing. The International Academy for Production Engineering Annals, 58, 9-12(2009).

[12] C Ferreira1, C Esteves, P Silva et al. Comparative life-cycle assessment of two car armrests produced at Cie Plasfil. Energy for Sustainability, 1-6(2013). https://www.ncbi.nlm.nih.gov/pubmed/30607262

[13] M Ghodrat, A Rhamdhani M, P Sharafi et al. A comparative life cycle assessment of recycling the platinum group metals from automobile catalytic converter: An Australian perspective. Metallurgical and Materials Transactions E, 4, 2-4(2017).

[14] M Goede, M Stehlin, L Rafflenbeul et al. Super light car—lightweight construction thanks to a multi-material design and function integration. European Transport Research Review, 1, 5(2009).

[15] M Goede. Super light car: Sustainable production technologies of emission reduced light weight car concepts (SLC). Transport Research Arena Europe 2006, Göteborg, Sweden.(2006).

[16] M Goedkoop, R Spriensma. The Ecoindicator’99: A damage oriented method for life cycle impact assessment: Methodology report. Product Ecology Consultants, Amersfoort: The Netherlands.(2000).

[17] N Huntzinger D, D Eatmon T. A life-cycle assessment of Portland cement manufacturing: Comparing the traditional process with alternative technologies. Journal of Cleaner Production, 17, 668-675(2009).

[18] Standardization International Organization for. Environmental Management—Life cycle assessment—Principles and framework. ISO: Geneva, Switzerland.(2006).

[19] L Sullivan1 J, A Burnham1 et al. Impacts of vehicle weight reduction via material substitution on life-cycle greenhouse gas emissions. Environmental Science & Technology, 49, 12535-12542(2015).

[20] F Klockea, A Kampkera, B Döbbelera et al. Simplified life cycle assessment of a hybrid car body part. 21st CIRP Conference on Life Cycle Engineering, Elsevier, 484-489(2014).

[21] K Konrad S, J Gediga, M Hesselbach et al. Eyerer: case studies and projects LCA in the automotive industry life cycle assessment as an engineering tool in the automotive industry. The International Journal of Life Cycle Assessment, 1, 15-21(1996).

[22] Y Liu, R Nie Z, X Sun B et al. Development of Chinese characterization factors for land use in life cycle impact assessment. Science China Technological Sciences, 53, 1483-1488(2010).

[23] I Muñoz, J Rieradevall, X Domènech et al. LCA case studies: Using LCA to assess eco-design in the automotive sector case study of a polyolefinic door panel. The International Journal of Life Cycle Assessment, 11, 323-334(2006).

[24] S Prabhakaran, K Chinnarasu, M Senthil Kumar. Design and fabrication of composite bumper for light passenger vehicles. International Journal of Modern Engineering Research, 2, 2552-2556(2012).

[25] A Simboli, A Raggi, P Rosica. Life cycle assessment of process eco- innovations in an SME automotive supply network. Sustainability, 7, 13761-13776(2015).

[26] B Song Q, S Wang Z, H Li J et al. Life cycle assessment of desktop PCs in Macau. The International Journal of Life Cycle Assessment, 18, 553-566(2013).

[27] K Sooa V, P Compston, M Doolan. Is the Australian automotive recycling industry heading towards a global circular economy — A case study on vehicle doors. The International Academy for Production Engineering 69, Copenhagen, Denmark, 843-848(2018).

[28] H Tan R B, H Khoo. An LCA study of a primary aluminium supply chain. Journal of Cleaner Production, 13, 607-618(2005).

[29] M Vanalle R, C Lucato W, B Santos L. Environmental requirements in the automotive supply chain—An evaluation of a first tier company in the Brazilian auto industry. Procedia Environmental Sciences, 10, 337-343(2011).

[30] A Witik R, J Payet, V Michaud et al. Assessing the life cycle costs and environmental performance of lightweight materials in automobile applications. Composites: Part A, 42, 1694-1709(2011).

[31] F Younsi, K Louhab. Using life cycle assessment methodology to assess human health and ecosystem toxicity impacts associated with milk production in Algeria. Fresenius Environmental Bulletin, 26, 2518-2523(2017).

[32] S Yusoff, B Hansen S. Feasibility study of performing a life cycle assessment on crude palm oil production in Malaysia. International Journal of Life Cycle Assessment, 12, 50-58(2007).