• Photonic Sensors
  • Vol. 3, Issue 1, 67 (2013)
Joao M. P. COELHO*, Marta C. NESPEREIRA, Manuel ABREU, and José M. REBORDAO
Author Affiliations
  • University of Lisbon, Faculty of Sciences, Laboratory of Optics, Lasers and Systems, 1749-016 Lisbon, Portugal University of Lisbon, Faculty of Sciences, Institute of Biophysics and Biomedical Engineering, 1649-038 Lisbon, Portugal
  • show less
    DOI: 10.1007/s13320-012-0084-1 Cite this Article
    Joao M. P. COELHO, Marta C. NESPEREIRA, Manuel ABREU, José M. REBORDAO. Modeling Refractive Index Change in Writing Long-Period Fiber Gratings Using Mid-Infrared Laser Radiation[J]. Photonic Sensors, 2013, 3(1): 67 Copy Citation Text show less
    References

    [1] A. D. Kersey, M. A. Davis, J. P. Heather, M. LeBlanc, K. P. Koo, C. G. Askins, et al., “Fiber grating sensors,” Journal of Lightwave Technology, vol. 15, no. 8, pp. 1442-14463, 1997.

    [2] C. Silva, J. M. P. Coelho, P. Caldas, O. Frazao, P. A. Jorge, and J. L. Santos, “Optical fiber sensing system based on long-period gratings for remote refractive index measurement in aqueous environments,” Fiber and Integrated Optics, vol. 29, no. 3, pp. 160-169, 2009.

    [3] A. Martinez-Rios, D. Monzon-Hernandez, Ismael Torres-Gomez, and G. Salceda-Delgado, “Long period fiber gratings,” in Fiber Optic Sensors. Moh. Yasin, S. Harun and H. Arof, Ed. Ridjeka, Croatia: InTech, pp. 275-291, 2012.

    [4] C. Silva, J. M. P. Coelho, P. Caldas, and P. Jorge, “Fiber sensing system based on long-period gratings for monitoring aqueous environments,” in Fiber Optic Sensors. Moh. Yasin, S. Harun and H. Arof, Ed. Ridjeka, Croatia: InTech, pp. 317-341, 2012.

    [5] S. Savin, M. J. F. Digonnet, G. S. Kino, and H. J. Shaw, “Tunable mechanically induced long-period fiber gratings,” Optics Letters, vol. 25, no. 10, pp. 710-712, 2000.

    [6] M. Vaziri and C. L. Chen, “An etched two-mode fiber modal coupling element,” Journal of Lightwave Technology, vol. 15, no. 3, pp. 474-481, 1997.

    [7] G. M. Rego, “Arc-induced long-period fiber gratings: fabrication and their application in communications and sensing,” Ph. D. dissertation, Dept. Elect. Comp. Eng., Univ. of Porto, Porto, Portugal, 2006.

    [8] J. Estudillo-Ayala, R. Mata-Chavez, J. Hernandez-Garcia, and R. Rojas-Laguna, “Long period fiber grating produced by arc discharges,” in Fiber Optic Sensors. Moh. Yasin, S. Harun and H. Arof, Ed. Ridjeka, Croatia: InTech, pp. 295-316, 2012.

    [9] A. M. Vengsarkar, P. J. Lemaire, J. B. Judkins, B. Bhatia, T. Erdogan, and J. E. Sipe, “Long-period fiber gratings as band-rejection filters,” in Optical Fiber Communication Conference (OFC), San Diego, CA, Feb. 1995, pp. PD4-2, 1995.

    [10] A. M. Vengsarkar, P. J. Lemaire, J. B. Judkins, V. Bhatia, T. Erdogan, and J. E. Sipe, “Long-period fiber gratings as band-rejection filters,” Journal of Lightwave Technology, vol. 14, no. 1, pp 58-65, 1996.

    [11] D. D. Davis, T. K. Gaylord, E. N. Glytis, S. G. Kosinski, S. C. Mettler, and A. M. Vengsarkar, “Long period fiber grating fabrication with focused CO2 laser pulses,” Electronics Letters, vol. 34, no. 3, pp. 302-303, 1998.

    [12] M. Akiyama, K. Nishide, K. Shima, A. Wada, and R. Yamauchi, “A novel long-period fiber grating using periodically releases residual stress of pure-silica core fiber,” in Optical Fiber Communication Conference (OFC), San José, CA, Feb. 22-27, pp. 276-277, 1998.

    [13] J. Coelho, M. Nespereira, C. Silva, and J. Rebordao, “LOLS research in technology for the development and application of new fiber-based sensors,” Sensors, vol. 12, no. 3, pp. 2654-2666, 2012.

    [14] S. T. Oh, W. T. Han, U. C. Paek, and Y. Chung, “Azimuthally symmetric long-period fiber gratings fabricated with CO2 laser,” Microwave Optical Technology Letters, vol. 41, no. 3, pp. 188-190, 2004.

    [15] A. D. Yablon, “Optical and mechanical effects of frozen-in stresses and strains in optical fibers,” IEEE Journal of Selected Topics in Quantum Electronics, vol. 10, no. 2, pp. 300-311, 2004.

    [16] A. D. Yablon, M. F. Yan, P. Wisk, F. V. DiMarcello, J. W. Fleming, W. A. Reed, et al., “Refractive index perturbations in optical fibers resulting from frozen-in viscoelasticity,” Applied Physics Letters, vol. 84, no. 1, pp. 19-21, 2004.

    [17] S. Yang, M. Matthews, S. Elhadj, V. Draggoo, and S. Bisson, “Thermal transport in CO2 laser irradiated fused silica: in situ measurements and analysis,” Journal of Applied Physics, vol. 106, no. 10, pp. 103106-1-103106-7, 2009.

    [18] J. Coelho, M. Abreu, and F. Carvalho-Rodrigues, “Modelling the spot shape influence on high-speed transmission lap welding of thermoplastics films,” Optics Laser in Engineering, vol. 46, no. 1, pp. 55-61, 2008.

    [19] A. Grellier, N. Zayer, and C. Pannell, “Heat transfer modelling in CO2 laser processing of optical fibers,” Optics Communication, vol. 152, no. 4-6, pp. 324-328, 1998.

    [20] S. P. Timoshenko and J. N. Goodier, Theory of elasticity, 2nd Edition. New York: McGraw-Hill, pp. 409-410, 1951.

    [21] M. Lancry, E. Réginier, and B. Poumellec, “Fictive temperature in silica-based glasses and its application to optical fiber manufacturing,” Progress in Material Sciences, vol. 57, no. 1, pp. 63-94, 2012.

    [22] Corning SMF-28 optical fiber product information, Corning Inc.: NY, PI1036, 2002.

    [23] C. A. Worrel, “Infrared optical constants for CO2 laser waveguide materials,” Journal Materials Science, vol. 21, no. 3, pp. 781-787, 1986.

    [24] P. D. Dragic, “The acoustic velocity of Ge-doped silica fibers: a comparison of two models,” International Journal of Applied Glass Science, vol. 1, no. 3, pp. 330-337, 2010.

    [25] P. André, A. Rocha, F. Domingues, and M. Facao, “Thermal effects in optical fibers,” in Developments in Heat Transfer. Marco Aurélio dos Santos Bernardes Ed. Ridjeka, Croatia: InTech, pp. 1-20, 2011.

    [26] D. Nikogosyan, “Multi-photon high-excitation energy approach to fiber grating inscription,” Measurement Science and Technology, vol. 18, no. 1, pp. R1-R29, 2006.

    [27] J. Clowes, S. Syngellakis, and M. Zervas, “Pressure sensitivity of side-hole optical fiber sensors,” IEEE Photonics Technology Letters, vol. 10, no. 6, pp. 857-859, 2009.

    [28] A. E. Siegman, M. W. Sasnett, and T. F. Johnston, “Choice of clip level for beam width measurements using knife-edge techniques,” IEEE Journal of Quantum Electronics, vol. 27, no. 4, pp. 1098-1104, 1991.

    [29] H. Limberger, P. Y. Fonjallaz, R. Salathé, and F. Couché, “Compaction- and photoelastic-induced index changes in fiber Bragg gratings,” Applied Physics Letters, vol. 68, no. 22, pp. 2069-3071, 1996.

    [30] X. liu, M. Yan, L. Zhan, S. Luo, Z. Zhang, and Y. Xia, “Controlling of symmetric and asymmetric mode coupling in long-period fiber gratings singe-side induced by long-pulse CO2 laser,” Optical Communication, vol. 284, no. 5, pp. 1232-1237, 2011.

    [31] T. Erdogan, “Cladding-mode resonances in shortand long-period fiber grating filters,” Journal of Optics Society America A, vol. 14, no. 8, pp. 1760-1773 1997.

    [32] T. Erdogan, “Cladding-mode resonances in shortand long-period fiber grating filters: errata,” Journal of Optics Society America A, vol. 17, no. 11, pp. 2113, 2000.

    Joao M. P. COELHO, Marta C. NESPEREIRA, Manuel ABREU, José M. REBORDAO. Modeling Refractive Index Change in Writing Long-Period Fiber Gratings Using Mid-Infrared Laser Radiation[J]. Photonic Sensors, 2013, 3(1): 67
    Download Citation