[2] D. W. Camp, M. R. Kozlowski, L. M. Sheehan et al.. Subsurface damage and polishing compound affect the 355 nm laser damage threshold of fused silica surfaces[C]. SPIE, 1998, 3244: 356~364
[3] Jian Shen, Shouhua Liu, Kui Yi et al.. Subsurface damage in optical substrates[J]. Optik, 2005, 116(6): 288~294
[4] Li Gailing, Wu Yulie, Wang Zhuo et al.. Experiment study on the destructive measurement of the depth of SSD for optical material[J]. Aviation Precision Manufacturing Technology, 2006, 42(6): 19~22
[5] Ma Bin, Shen Zhengxiang, Zhang Zhong et al.. Fabrication and detection technique of fused silica substrate with extremely low subsurface damage[J]. High Power Laser and Particle Beams, 2010, 22(9): 2181~2185
[7] J. Neauport, C. Ambard, P. Cormont. Subsurface damage measurement of ground fused silica parts by HF etching techniques [J]. Opt. Express, 2009, 17(22): 20448~20456
[8] Feng Jingwu. Side-testing method for measuring depth of destructive layer of fine-ground glass surface[J]. Optical Technique, 1994, 20(5): 23~26
[10] American Society for Testing and Materials. ASTM F950-98: Standard Test Method for Measuring the Depth of Crystal Damage of a Mechanically Worked Silicon Slice Surface by Angle Polishing and Defect Etching[S]. West Conshohocken: ASTM International, 1998
[11] Zhang Yinxia. Measurement of silica wafer surface/subsurface damage induced by ultra-precision processing[J]. Electronic Quality, 2004, (7): 72~75
[12] P. E. Miller, T. I. Suratwala, L. L. Wong et al.. The distribution of subsurface damage in fused silica[C]. SPIE, 2005, 5991: 599101
[13] A. R. Joseph, C. L. John, D. J. Stephen. Subsurface damage in some single crystalline optical materials [J]. Appl. Opt., 2005, 44(12): 2241~2249
[14] A. M. Joseph, J. D. Pete, A. S. William et al.. Utilization of magnetorheological finishing as a diagnostic tool for investigating the three-dimensional structure of fractures in fused silica[C]. SPIE, 2005, 5991: 599102
[15] Wang Zhuo, Wu Yulie, Dai Yifan et al.. Subsurface damage distribution in the lapping process[J]. Appl. Opt., 2008, 47(10): 1417~1426
[16] Yaguo Li, Nan Zheng, Haibo Li et al.. Morphology and distribution of subsurface damage in optical fused silica parts: bound-abrasive grinding[J]. Appl. Surf. Sci., 2011, 257(6): 2066~2073
[17] Z. L. Wu, L. Sheehan, M. R. Kozlowski. Laser modulated scattering as a nondestructive evaluation tool for defect inspection in optical materials for high power laser applications[J]. Opt. Express, 1998, 3(10): 376~383
[18] Z. L. Wu, M. D. Feit, Mark R. Kozlowski et al.. Laser modulated scattering as a nondestructive evaluation tool for optical surfaces and thin film coatings[C]. SPIE, 1998, 3578: 721~729
[20] P. A. Temple. Total internal reflection microscopy: a surface inspection technique[J]. Appl. Opt., 1981, 20(15): 2656~2661
[21] Zhi M. Liao, Simon J. Cohen, R. John et al.. Total internal reflection microscopy (TIRM) as a nondestructive subsurface damage assessment tool[C]. SPIE, 1995, 2428: 43~53
[22] M. S. Lynn, K. Mark, W. C. David. Application of total internal reflection microscopy for laser damage studies on fused silica [C]. SPIE, 1998, 3244: 282~295
[24] M. Bashkansky, M. D. Duncan, M. Kahn et al.. Subsurface defect detection in ceramics by high-speed high-resolution optical coherent tomography[J]. Opt. Lett., 1997, 22(1): 61~64
[25] M. Bashkansky, M. D. Duncan, M. Kahn et al.. Subsurface defect detection in ceramic materials using low coherence optical scatter reflectometer[C]. Proceedings of a Joint Conference, 1996. 22~26
[27] D. Rats, J. V. Stebut, F. Augereau. High frequency scanning acoustic microscopy: a novel non-destructive surface analytical tool for assessment of coating-specific elastic moduli and tomographic study of subsurface defects[J]. Thin Solid Films, 1999, 355-356: 347~352
[28] J. Si ndel, A. Petschelt. Evaluation of subsurface damage in CAD/CAM machined dental ceramics[J]. Mater. Sci. : Materials in Medicine, 1998, 9(5): 291~295
[29] Kevin R. Fine, Reinhold Garbe, Tung Gip et al.. Non-destructive, real time direct measurement of subsurface damage[C]. SPIE, 2005, 5799: 105~110