[1] A NASIRI N, N PATRA, N NI et al. Oxidation behaviour of SiC/SiC ceramic matrix composites in air. Journal of the European Ceramic Society, 36, 3293-3302(2016).

[3] M STAEHLER J, P ZAWADA L. Performance of four ceramic-matrix composite divergent flap inserts following ground testing on an F110 turbofan engine. Journal of the American Ceramic Society, 83, 1727-1738(2000).

[5] H CHARLES, J HENAGER, J KURTZ R. Low-activation joining of SiC/SiC composites for fusion applications. Journal of Nuclear Materials, 417, 375-378(2011).

[6] J LAMON. A micromechanics-based approach to the mechanical behavior of brittle matrix composites. Composites Science Technology, 61, 2259-2272(2001).

[7] F REBILLAT, J LAMON, R NASLAIN et al. Interfacial bond strength in SiC/C/SiC composite materials, as studied by single-fibre push-out tests. Journal of American Ceramic Society, 81, 965-978(1998).

[8] K SREEJITH, V VIPIN, S SUBRAMANIA et al. A comparative study on C_f/PyC/SiC minicomposites prepared via CVI process for hypersonic engine application. International Journal of Applied Ceramic Technology, 15, 1110-1123(2018).

[9] F WINDISCH C, C HENAGER, D SPRINGER G et al. Oxidation of the carbon interface in Nicalon fiber reinforced silicon carbide composite. Journal of the American Ceramic Society, 80, 569-574(1997).

[10] YING SHI, HIROSHI ARAKI, WEN YANG et al. Influence of fiber pre-coating on mechanical properties and interfacial structures of SiC(f)/SiC composites. Journal of Inorganic Materials, 16, 883-888(2001).

[11] J OPILA E, J VERRILLI M. Borosilicate glass-induced fiber degradation of SiC/BN/SiC composites exposed in combustion environments. International Journal of Applied Ceramic Technology, 13, 434-442(2016).

[12] L WING B, W HALLORAN J. Subsurface oxidation of boron nitride coatings on silicon carbide fibers in SiC/SiC ceramic matrix composites. Ceramics International, 44, 17499-17505(2018).

[13] R NASLAIN R, F PAILLER R J, L LAMON J. Single and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions: an overview. International Journal of Applied Ceramic Technology, 7, 263-275(2010).

[14] S BERTRAND, P FORIO, R PAILLER et al. Hi-Nicalon/SiC minicomposites with (pyrocarbon/SiC)_n nanoscale multilayered interphases. Journal of the American Ceramic Society, 82, 2465-2473(1999).

[15] S BERTRAND, R PAILLER, J LAMON. SiC/SiC minicomposites with nanoscale multilayered fibre coatings. Composites Science and Technology, 61, 363-367(2001).

[16] HAIJIAO YU, XINGUI ZHOU, WEI ZHANG et al. Mechanical behavior of SiC_f/SiC composites with alternating PyC/SiC multilayer interphases. Materials and Design, 44, 320-324(2013).

[17] M YANG, C ZHOU W, F LUO et al. Effects of BN/SiC dual-layer interphase on mechanical and dielectric properties of SiC_f/SiC composites. Ceramic International, 40, 3411-3418(2014).

[18] S BERTRAND, O BOISRON, R PAILLER et al. (PyC-SiC)_n and(BN-SiC) _n nano-scale multilayered interphases by pressure pulsed-CVI. Key Engineering Materials, 165, 357-360(1999).

[19] A AMJAD, M EMMANUEL, R SIVAKUMAR et al. Effect of fiber content on single tow SiC minicomposite mechanical and damage properties using acoustic emission. Journal of the European Ceramic Society, 35, 3389-3399(2015).

[20] X LV X, Z QI, Y JIANG Z et al. The Microstructure and Mechanical Properties of Silicon Carbide Fibers with Boron Nitride Interphase. IOP Conf. Series: Materials Science and Engineering, 678, 012061(2019).

[21] GUODONG WANG, YONGCAI SONG. Enhancing mechanical property of SiC fiber by decreasing fiber diameter through a modified melt-spinning process. Journal of Inorganic Materials, 33, 721-727(2018).

[22] Y MU, C ZHOU W, C WANG et al. Mechanical and electromagnetic shielding properties of SiC_f/SiC composites fabricated by combined CVI and PIP process. Ceramics International, 40, 10037-10041(2014).