[1] THOMPSON W B,OWEN J C,GERMAIN H J,et al. Feature-based reverse engineering of mechanical parts [J]. IEEE Transactions on Robotics and Automation,1999,15(1):57-66.

[2] VARADY T,MARTIN R R,COX J. Reverse engineering of geometric models - an introduction [J]. Computer-Aided Design,1997,29(4):255-268.

[4] ALRASHDAN A,MORAVALLI S,FALLAHI B. Automatic Segmentation of digitized data for reverse engineering applications [J]. IIE Transaction (Institute of Industrial Engineers),2000,32(1):59-69.

[5] YANG M,LEE E. Segmentation of measured point data using a parametric quadric surface approximation [J]. Computer-Aided Design,1999,31(7):449-457.

[6] MILROY J,BRADLEY C,VICKERS G W. Segmentation of a wrap-around model using an active contour [J]. Computer-Aided Design,1997,29(4):299-320.

[7] SANSONI G,CORINI S,LAZZARI S,et al. Three-dimensional imaging based on Gray-code light projection: characterization of the measuring algorithm and development of a measuring system for industrial applications [J]. Applied Optics,1997,36(19):4463-4472.

[8] POSDAMER J L,ALTSCHULER M D. Surface measurement by space-encoded projected beam system [J]. Computer Graphics Image Process,1982,18(1):1-17.

[9] BATLLE J,MOUADDIB E,SALVI J. Recent progress in coded structured light as a technique to solve the correspondence problem: a survey [J]. Pattern Recognition,1998,31(7):963-982.

[10] SU X Y,CHEN W J. Fourier transform profilometry: a review [J]. Optics and Lasers in Engineering,2001,35(5):263-284.

[11] HALIOUA M,LIU H C. Optical three-dimensional sensing by phase measuring profilometry [J]. Optics and Lasers in Engineering,1989,11(3):185-215.