• Optics and Precision Engineering
  • Vol. 21, Issue 7, 1748 (2013)
SONG Man-cang1,2,*, XIE Ting-li1,2, DU Li-qun3, WANG Min-jie1,2, and LIU Chong3
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    DOI: 10.3788/ope.20132107.1748 Cite this Article
    SONG Man-cang, XIE Ting-li, DU Li-qun, WANG Min-jie, LIU Chong. WEDM of meso-scale structure on thin nickel plate[J]. Optics and Precision Engineering, 2013, 21(7): 1748 Copy Citation Text show less
    References

    [1] WANG ZH L. Micro Manufacturing Technology [M].Beijing: National Defense Industry Press, 2005. (in Chinese)

    [2] MING P M. Fundamental reaching on UV-LIGA-Micro-EDM technology [D]. Nanjing: Nanjing university of aeronautics and astronautics, 2006. (in Chinese)

    [3] RONG L R. Micro fabrication technology based on non-traditional machining [J]. MW Metal Cutting, 2011, 13:33-37. (in Chinese)

    [4] CAO D M, JIANG J, YANG R, et al.. Fabrication of high-aspect-ratio micro-scale mold inserts by parallel μ-EDM[J]. Microsyst Technol, 2006,12(9):839-845.

    [5] DU L Q, MO SH P, ZHANG Y SH, et al.. Fabrication of 3D metal microstructure based on UV-LIGA and micro-EDM technology [J]. Opt. Precision Eng., 2010, 18(2):363-368. (in Chinese)

    [6] KODALAGARA P S. Material removal characteristics of micro-slot(kerf) geometry in μ–WEDM on aluminum [J]. Int Adv Manuf Technol, 2010, 51:611-626.

    [7] DI S C, CHU X Y, WEI D B, et al.. Analysis of kerf width in micro-WEDM [J]. International Journal of Machine Tools & Manufacture, 2009, 49:788-792.

    [8] DODUN O, GONCALVES A M. Using wire electrical discharge machining for improve corner cutting accuracy of thin parts [J]. Int Adv Manuf Technol, 2009, 41:858-864.

    [9] ZHANG Z H, GUO L B, CUI H, et al.. Surface texture evaluation of micro-wEDM [J]. Applied Mechanics and Materials, 2012, 138-139:1251-1257.

    [10] LIANG J ZH, LIANG Q H. Multi-chip cutting for the thin workpiece using WEDM [J]. Mechanical Engineer, 2012(7):122-123. (in Chinese)

    [11] QI W CH, MA CH P, GAO J Q. Research for the strategy of first cutting parameter optimization based on multiple cutting process [J]. Electromachinging & Mould, 2012,(3):50-53. (in Chinese)

    [12] SONG M C, ZHANG J L, YU CH, et al.. Experiment of WEDM precision machining for polycrystalline diamond compact[J]. Opt. Precision Eng., 2012, 20(6):1303-1309. (in Chinese)

    SONG Man-cang, XIE Ting-li, DU Li-qun, WANG Min-jie, LIU Chong. WEDM of meso-scale structure on thin nickel plate[J]. Optics and Precision Engineering, 2013, 21(7): 1748
    Download Citation