[1] Hu Y J, Lin J, Zhang S Q, et al. Identification of the typical metal particles among haze, fog, and clear episodes in the Beijing atmosphere[J]. Science of the Total Environment, 2015, 511: 369-380.
[2] Li T, Hu R, Chen Z, et al. Fine particulate matter (PM2.5): The culprit for chronic lung diseases in China[J]. Chronic Diseases and Translational Medicine, 2018, 4(3): 176-186.
[3] Zhang W, Ji Y Q, Li S L, et al. The distribution characteristics of silt loading of typical roads in Tianjin during spring[J]. Environmental Monitoring in China, 2018, 34(1): 54-59.
[4] Wang P, Cao J J, Shen Z X, et al. Spatial and seasonal variations of PM2.5 mass and species during 2010 in Xi'an, China[J]. Science of the Total Environment, 2015, 508: 477-487.
[5] Zhang Y. Sources Apportionment and Controls of Particulate Matter in Xianyang City, Northwest China[D]. Beijing: University of Chinese Academy of Sciences, 2018.
[6] Zhao H T, Shao Y P, Yin C Q, et al. An index for estimating the potential metal pollution contribution to atmospheric particulate matter from road dust in Beijing[J]. Science of the Total Environment, 2016, 550: 167-175.
[7] Long X, Li N, Tie X X, et al. Urban dust in the Guanzhong Basin of China, part I: A regional distribution of dust sources retrieved using satellite data[J]. Science of the Total Environment, 2016, 541: 1603-1613.
[8] Chow J C, Watson J G, Green M C, et al. Cross-border transport and spatial variability of suspended particles in Mexicali and California's Imperial Valley[J]. Atmospheric Environment, 2000, 34(11): 1833-1843.
[9] Etyemezian V, Kuhns H, Gillies J, et al. Vehicle-based road dust emission measurement (III): Effect of speed, traffic volume, location, and season on PM10 road dust emissions in the Treasure Valley, ID[J]. Atmospheric Environment, 2003, 37(32): 4583-4593.
[10] Guo S, Xiao J Y, Liu J, et al. Silt loading characteristic of Shijiazhuang City paved road in winter based on sample plot method[J]. Environmental Science & Technology, 2017, 40(2): 163-167.
[11] Cheng Y, Lee S C, Gu Z L, et al. PM2.5 and PM10-2.5 chemical composition and source apportionment near a Hong Kong roadway[J]. Particuology, 2015, 18: 96-104.
[12] Zhu Z Y, Ji Y Q, Zhang S J, et al. Relationships of silt loading between different lanes of roads in Tianjin, China during summer[J]. Chinese Journal of Environmental Engineering, 2016, 10(8): 4414-4418.
[13] Feng W, Sun C Y, Xu L Q, et al. Research and application of new technology based on reducing dust in road sweeper operation[J]. Environmental Sanitation Engineering, 2019, 27(3): 93-96.
[15] Peng K, Yang Y, Zheng J, et al. Emission factor and inventory of paved road fugitive dust sources in the Pearl River Delta region[J]. Acta Scientiae Circumstantiae, 2013, 33(10): 2657-2663.
[16] Yang D R, Ye Z X, Yang H J, et al. Emission inventory and spatial distribution of paved road fugitive dust in Chengdu in Sichuan Province[J]. Environmental Engineering, 2015, 33(11): 83-87.
[17] Zhu J X, Cheng H R, Hu C J, et al. Study on the load distribution characteristics and source emission inventory of road dust in the city of Wuhan[J]. Journal of Nanjing University of Information Science & Technology, 2018, 10(5): 557-562.
[18] Ministry of Environmental Protection of the People's Republic of China. Technical specifications for urban fugitive dust pollution prevention and control: HJ/T 393-2007[S]. Beijing: China Environment Science Press, 2008.
[19] Zhang C Y, Wu J H, Zhang J, et al. Particulate composition and source apportionment trends in winter in Chengdu[J]. Research of Environmental Sciences, 2014, 27(7): 782-789.
[20] US EPA. Emission factor documentation for AP-42, section 13.2.1: Paved roads[R]. Kansas City Midwest Research Institute, 2011.
[21] Xu Y, Zhou Q. Emission characteristics and spatial distribution of road fugitive dust in Tianjin, China[J]. China Environmental Science, 2012, 32(12): 2168-2173.
[22] Kavouras I G, DuBois D W, Nikolich G, et al. Particulate dust emission factors from unpaved roads in the US-Mexico border semi-arid region[J]. Journal of Arid Environments, 2016, 124: 189-192.
[23] Fan S B, Zhang D X, Tian L D. Assessment for AP-42 model of road dust emissions and its application in Beijing, China[J]. Chinese Journal of Environmental Engineering, 2016, 10(5): 2501-2506.
[24] Hsu C Y, Chiang H C, Lin S L, et al. Elemental characterization and source apportionment of PM10 and PM2.5 in the western coastal area of Central Taiwan[J]. Science of the Total Environment, 2016, 541: 1139-1150.
[25] Fan S B, T G, Li G, et al. Emission characteristics of paved roads fugitive dust in Beijing[J]. Environmental Science, 2007, 28(10): 2396-2399.
[26] Fan S B, Tian G, Li G. Road dust load measurement system based on vehicle-mounted instruments: CN203422305U[P]. 2014-02-05.
[28] Zhang S J. Research on Road Dust Emission Inventory of Tianjin Based on Fast Detection[D]. Tianjin: Nankai University, 2016.
[29] Xiao J Y, Liu J, Guo S, et al. Study on silt loading emission characteristics of urban in Shijiazhuang[J]. Environmental Pollution Control, 2018, 40(2): 186-188.
[31] Amato F, Querol X, Johansson C, et al. A review on the effectiveness of street sweeping, washing and dust suppressants as urban PM control methods[J]. Science of the Total Environment, 2010, 408(16): 3070-3084.
[32] Feng W, Sun C Y, Xu L Q, et al. Research and application of new technology based on reducing dust in road sweeper operation[J]. Environmental Sanitation Engineering, 2019, 27(3): 93-96.
[33] Liang W, Mou G L, Lai Y P, et al. Cost analysis of road sweeping & cleaning in Xi'an City[J]. Environmental Sanitation Engineering, 2012, 20(2): 26-28.
[34] Amato F, Pandolfi M, Escrig A, et al. Quantifying road dust resuspension in urban environment by Multilinear Engine: A comparison with PMF2[J]. Atmospheric Environment, 2009, 43(17): 2770-2780.
[35] Amato F, Querol X, Alastuey A, et al. Evaluating urban PM10 pollution benefit induced by street cleaning activities[J]. Atmospheric Environment, 2009, 43(29): 4472-4480.
