[1] Lv Anqiang, Li Yongqian, Li Jing, et al. Strain and temperature monitoring of optical fiber composite submarine power cable based on brillouin optical time domain reflectometer[J]. High Voltage Engineering, 2014, 40(2): 533-539.
[2] Jiang Q, Sui Q. Technological study on distributed fiber sensor monitoring of high voltage power cable in seafloor[C]//United States: IEEE Computer Society, 2009: 1154-1157.
[3] Sun Y, Shi B, Chen S, et al. Feasibility study on corrosion monitoring of a concrete column with central rebar using BOTDR[J]. Smart Structures and Systems, 2014, 13(1): 41-53.
[4] Wait P C, Newson T P. Landau Placzek ratio applied to distributed fibre sensing[J]. Opt Commun, 1996, 122: 141-146.
[5] Maughan S M, Kee H H, Newson T P. Simultaneous distributed fibre temperature and strain sensor using microwave coherent detection of spontaneous Brillouin backscatter[J]. Measurement Science and Technology, 2001, 12(7): 834.
[6] Alahbabi M N, Cho Y T, Newson T P. Simultaneous distributed measurements of temperature and strain using spontaneous Raman and Brillouin scattering[C]//Proceedings of EWOFS’04, 2004: 488-491.
[7] Liu X, Bao X. Brillouin spectrum in LEAF and simultaneoustemperature and strain measurement[J]. Journal of Lightwave Technology, 2012, 30(8): 1053-1059.
[8] Dong Y, Chen L, Bao X. High-spatial-resolution time-domain simultaneous strain and temperature sensor using Brillouin scattering and birefringence in a polarization-maintaining fiber[J]. Photonics Technology Letters, IEEE, 2010, 22(18): 1364-1366.
[9] Li T, Dong X, Chan C C, et al. Simultaneous strain and temperature measurement based on a photonic crystal fiber modal-interference interacting with a long period fiber grating[J]. Optics Communications, 2012, 285(24): 4874-4877.
[10] Parker T R, Farhadiroushan M, Handerek V A, et al. Temperature and strain dependence of the power level and frequency of spontaneous Brillouin scattering in optical fibers[J]. Optics Letters, 1997, 22(11): 787-789.
[11] Sakairi Y, Uchiyama H, Li Z X, et al. System for measuring temperature and strain separately by BOTDR and OTDR[C]// SPIE, 2002, 4920: 274-284.
[12] Aoyama K, Nakagawa K, Itoh T. Optical time domain Reflectometry in a single-mode fiber[J]. Quantum Electron, 1981, QE-17(6): 862-868.
[13] Zhang Huayong, Zhang Min, Wang Liwei, et al. Output noise analysis of optical fiber interferometric sensors using a 3×3 coupler[J]. Measurement Science and Technology, 2011: 1-9.
