Gaussian Pulsed Laser Etching of CVD Diamonds

Chen Ni; Yan Bo; Li Zhenjun; Li Liang; He Ning

doi:10.3788/CJL202047.1202007

[1] Bassett W A, Skalwold E A. Diamond cleavage: importance to high pressure research[J]. High Pressure Research, 37, 46-58(2017). http://smartsearch.nstl.gov.cn/paper_detail.html?id=6c83cbf885afe0dccb83ec5235084639

[2] Chen G Y, Zhu Z C, Yin J et al. Experiment on ablation threshold of single crystal diamond produced by femtosecond laser processing[J]. Chinese Journal of Lasers, 46, 0402001(2019).

[3] Derry T E, van der Berg N, Makau N W. Diamond surfaces polished both mechanically and manually; an atomic force microscopy (AFM) study[J]. Diamond and Related Materials, 17, 127-136(2008). http://www.sciencedirect.com/science/article/pii/S0925963507004724

[4] Ollison C D, Brown W D, Malshe A P et al. A comparison of mechanical lapping versus chemical-assisted mechanical polishing and planarization of chemical vapor deposited (CVD) diamond[J]. Diamond and Related Materials, 8, 1083-1090(1999). http://www.sciencedirect.com/science/article/pii/S0925963599000916

[5] Fonda P, Katahira K, Kobayashi Y et al. WEDM condition parameter optimization for PCD microtool geometry fabrication process and quality improvement[J]. The International Journal of Advanced Manufacturing Technology, 63, 1011-1019(2012). http://link.springer.com/article/10.1007/s00170-012-3977-7

[6] Yang K H. Research on structure design and grinding research of diamond arc edge micro milling cutter[D]. Nanjing: Nanjing University of Aeronautics and Astronautics(2019).

[7] ShresthaR, Zhan ZB, HeN, et al., 2014, 800/801: 633- 638.

[8] Mouhamadali F, Equis S, Saeidi F et al. Nanosecond pulsed laser-processing of CVD diamond[J]. Optics and Lasers in Engineering, 126, 105917(2020).

[9] Yang Z Q, Duan J, Chen H et al. Chemically strengthened glass fabricated by picosecond Bessel beam cutting[J]. Chinese Journal of Lasers, 46, 1102010(2019).

[10] Qin X Y, Huang T, Xiao R S. Periodic microstructure on Ti surface induced by high-power green femtosecond laser[J]. Chinese Journal of Lasers, 46, 1002006(2019).

[11] Eberle G, Wegener K. Ablation study of WC and PCD composites using 10 picosecond and 1 nanosecond pulse durations at green and infrared wavelengths[J]. Physics Procedia, 56, 951-962(2014).

[12] Chen N, Li Z J, Wu Y et al. Investigating the ablation depth and surface roughness of laser-induced nano-ablation of CVD diamond material[J]. Precision Engineering, 57, 220-228(2019). http://www.researchgate.net/publication/332713900_Investigating_the_ablation_depth_and_surface_roughness_of_laser-induced_nano-ablation_of_CVD_diamond_material

[13] Li Z J, Chen N, Li L et al. Influence of the grain size of CVD diamond on the thermal conductivity, material removal depth and surface roughness in nanosecond laser machining[J]. Ceramics International, 46, 20510-20520(2020).

[14] Ma L Z. Research on fabrication of CVD diamond micro milling tool with hybrid machining process[D]. Nanjing: Nanjing University of Aeronautics and Astronautics(2019).

[15] Wang G W. Modeling and simulation of laser heat source based on energy distribution[D]. Harbin: Harbin Institute of Technology(2017).

[16] Hirai H, Hidai H, Matsusaka S et al. Diamond slicing using ultrashort laser-induced graphitization and additional nanosecond laser illumination[J]. Diamond and Related Materials, 96, 126-133(2019).

[17] Stock F, Antoni F, Diebold L et al. UV laser annealing of diamond-like carbon layers obtained by pulsed laser deposition for optical and photovoltaic applications[J]. Applied Surface Science, 464, 562-566(2019).

[18] Hu A, Sanderson J, Zhou Y et al. Formation of diamond-like carbon by fs laser irradiation of organic liquids[J]. Diamond and Related Materials, 18, 999-1001(2009).