[1] Jiao Yang, He Weifeng, Sun Ling, et al. Study on compound technology of laser shock peening and aluminizing improve the mechanical properties of K417 alloy[J]. Infrared and Laser Engineering, 2015, 44(8): 2274-2279. (in Chinese)

[2] Nie Xiangfan, He Weifeng, Zhou Liucheng, et al. Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance[J]. Materials Science and Engineering A, 2014, 594: 161-167.

[3] An Zhibin, Shen Xiaojun, Gao Shan, et al. Nanocrystallization of Ni-based superalloy K403 by laser shock peening[J]. Infrared and Laser Engineering, 2016, 45(9): 921002. (in Chinese)

[4] Li Yinghong, Zhou Liucheng, He Weifeng, et al. The strengthening mechanism of a nickel-based alloy after laser shock processing at high temperatures[J]. Science and Technology of Advanced Materials, 2013, 14: 055010.

[5] Zhang Lei, Lu Jinzhong, Zhang Yongkang, et al. Effects of processing parameters on fatigue properties of LY2 Al alloy subjected to laser shock processing[J]. Chinese Optics Letters, 2011, 9(6): 061406.

[6] Li Yuqin, Li Yinghong, He Weifeng, et al. Wear resistance of 12CrNi3A steel after carburization and laser shock[J]. Chinese Journal of Lasers, 2013, 40(9): 0903004. (in Chinese)

[7] Shen Xiaojun, Wang Cheng, An Zhibin, et al. Effects of oblique laser shock processing on rotary bending fatigue of aero-engine fan shaft[J]. Infrared and Laser Engineering, 2015, 44(12): 2274-2279. (in Chinese)

[8] Sano Yuji, Obata Minoru, Kubo Tatsuya, et al. Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating[J]. Materials Science and Engineering A, 2006, 417: 334-340.

[9] Maawad E, Sano Y, Wagner L, et al. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys[J]. Materials Science and Engineering A, 2012, 536: 82-91.

[10] Sano Y, Masaki K, Gushi T, et al. Improvement in fatigue performance of friction stir welded A6061-T6 aluminum alloy by laser peening without coating[J]. Materials and Design, 2012, 36: 809-814.

[11] Kalainathan S, Sathyajith S, Swaroop S. Effect of laser shot peening without coating on the surface properties and corrosion behavior of 316L steel[J]. Optics and Lasers in Engineering, 2012, 50: 1740-1745.

[12] Uros Trdan, Juan A Porro, José L Ocana, et al. Laser shock peening without absorbent coating(LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy[J]. Surface & Coatings Technology, 2012, 208: 109-116.

[13] Che Zhigang. Numerical simulation and experimental study of microscale laser shock processing on metallic target[D]. Wuhan: Huazhong University of Science & Technology, 2009. (in Chinese)

[14] China Aeronautical Materials Handbook. Edits Committee. The Second of China Aeronautical Materials Handbook[M]. Beijing: China Standards Press, 2001: 645-651. (in Chinese)

[15] Kalainathan S, Prabhakaran S. Recent development and future perspectives of low energy laser shock peening[J]. Optics & Laser Technology, 2106, 81: 137-144

[16] Zhu Yunhu, Fu Jie, Zheng Chao, et al. Effect of laser shock peening without absorbent coating on the mechanical properties of Zr-based bulk metallic glass[J]. Optics & Laser Technology, 2015, 75: 157-163.

[17] Rubio-Gonzalez C, Ocan′a J L, Gomez-Rosas G, et al. Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy[J]. Materials Science and Engineering A, 2004, 386: 291-292.

[18] Qiao Hongchao, Zhao Yixiang, Zhao Jibin, et al. Effect of laser peening on microstructure and properties if TiAl alloy[J]. Optics and Precision Engineering, 2014, 22(7): 1766-1773. (in Chinese)

[19] Montross C S, Wei T, Ye L, et al. Laser shock processing and its effects on microstructure and properties of metal alloys: a review[J]. International Journal of Fatigue, 2002, 24: 1021-1036.

[20] Li B L, Godfrey A, Meng Q C, et al. Microstructure evolution of IF-steel during Cold Rolling[J]. Acta Materialia, 2004, 52: 1069-1081.

[21] Fabbro R, Fournier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 1990, 68: 775-784.

[22] Yilbas B S, Arif A E M. Laser shock processing of aluminium: model and experimental study[J]. Journal of Physics D: Applied Physics, 2007, 40: 6740-6747.

[23] Zhou Liucheng. The compound strengthen mechanism of laser shock processing and its application on the turbine blades in areoengine[D]. Xi′an: Air Force Engineering University, 2014. (in Chinese)