• Chinese Optics Letters
  • Vol. 15, Issue 9, 090601 (2017)
H. Ahmad, H. Hassan, R. Safaei, K. Thambiratnam*, and I. S. Amiri
Author Affiliations
  • Photonics Research Centre, University of Malaya, Kuala Lumpur 50603, Malaysia
  • show less
    DOI: 10.3788/COL201715.090601 Cite this Article Set citation alerts
    H. Ahmad, H. Hassan, R. Safaei, K. Thambiratnam, I. S. Amiri. Q-switched fiber laser using carbon platinum saturable absorber on side-polished fiber[J]. Chinese Optics Letters, 2017, 15(9): 090601 Copy Citation Text show less

    Abstract

    A 1550 nm Q-switched fiber laser using a carbon platinum saturable absorber deposited on side-polished fiber (SPF) is proposed and demonstrated. The SPF is approximately 2 mm with a polarization-dependent loss (PDL) of 0.4 dB and an insertion loss of 2.5 dB. A stable Q-switched output spectrum is obtained at 1559.34 nm with a peak power of 6 mW, a pulse width of 1.02 μs, pulse energy of 5.8 nJ, average output power of 0.76 mW, and a repetition rate of 131.6 kHz taken at a pump power of 230.0 mW. A signal-to-noise ratio of 49.62 dB indicates that the Q-switched pulse is highly stable.
    α(I)=αs1+IIsat+αns,(1)

    View in Article

    H. Ahmad, H. Hassan, R. Safaei, K. Thambiratnam, I. S. Amiri. Q-switched fiber laser using carbon platinum saturable absorber on side-polished fiber[J]. Chinese Optics Letters, 2017, 15(9): 090601
    Download Citation