Microstructure and Wear Resistance of Laser Cladding Al-Si-Ni-WC Coating on Aluminum Brake Disc Surfaces

Peng Zhao; Shouren Wang; Gaoqi Wang; Zhen Xiao; Shaoping Gao; Xiaoping Liu

doi:10.3788/CJL230731

[1] Shi X Y, Wen D S, Wang S R et al. Microstructures and high-temperature friction and wear properties of laser cladded Fe-Ni-Cr gradient composite coating for brake disc[J]. Chinese Journal of Lasers, 49, 0202017(2022).

[2] Xie Q, Song Y T. Lightening is the guarantee for the sustainable development of automobile industry[J]. Light Alloy Fabrication Technology, 41, 14-16(2013).

[3] Li X H, Wan X, Gan C L. Research status and development trend of automotive brake materials department[J]. Materials Research and Application, 14, 240-245(2020).

[4] Li Y L, Sun L, Cao L X et al. Research progress on friction and wear behavior of aluminum matrix composites for automobile brake discs[J]. Materials Reports, 34, 361-365(2020).

[5] Zhang S Y, Yin Q Z, Wei X H et al. Study of brake disc friction characteristics effect on low frequency brake induced vibration of aircraft landing gear[J]. Aerospace, 9, 809(2022).

[6] Wang C, Wang W, Ding S J et al. Preparation and tribological properties of laser cladding iron-based wear-resistant coatings[J]. Chinese Journal of Lasers, 49, 2202011(2022).

[7] Chen G X, An L Z, Wang S et al. Research survey and development trend of laser cladding technology[J]. Development & Innovation of Machinery & Electrical Products, 35, 15-18, 41(2022).

[8] Zhang P F, Li Y X, Wu L Y. Status and development of laser cladding on aluminum alloys[J]. Journal of Ordnance Equipment Engineering, 38, 151-155(2017).

[9] Li R. Study on microstructure and properties of laser cladding on aluminum alloy surface[D](2019).

[10] Peng S X. Study on laser cladding Fe-based and Ni-based alloy coatings on aluminum alloy surface[D](2013).

[11] Chen Z X, Zhou H M, Xu C X. Cladding crack in laser cladding: a review[J]. Laser & Optoelectronics Progress, 58, 0700006(2021).

[12] Shao H Q. Tribological behavior of ZL205A Al-alloy modified with laser cladded Al2O3-doped NiCrAl coatings[J]. Chinese Journal of Vacuum Science and Technology, 40, 1034-1038(2020).

[13] Lei L P. Study on microstructure and properties of laser cladding NiAl composite coating on aluminum alloy surface[D](2018).

[14] Zhou W L, Guo J T, Zhang S H. Research progress of Ni-Al intermetallic compound wear[J]. Foundry, 53, 836-838(2003).

[15] Yang Z Y. Nickel-aluminum composite wire, nickel-aluminum alloy wire and coating thereof[J]. Journal of Materials Engineering, 30, 31-33, 46(2002).

[16] Zhang H Y. Properties and microstructure of titanium-based powder coatings on aluminum alloys by laser cladding[J]. Powder Metallurgy Industry, 30, 71-75(2020).

[17] Huang Y, Li Y, Wu C C et al. Preparation and corrosion resistance of SiO2 ceramic coating on 2024 aluminum alloy surface[J]. Journal of Materials Science and Engineering, 40, 915-922, 955(2022).

[18] Wang K, Li D S, Ye Y et al. Study on nondestructive laser cleaning of aviation aluminum alloy surface coating[J]. Infrared and Laser Engineering, 51, 20210936(2022).

[19] Wang H C, Wei S F, He J X et al. Effect of Cr content on microstructure and properties of 5083 aluminum alloy with high magnesium[J]. Light Alloy Fabrication Technology, 48, 17-21(2020).

[20] Zadorozhnyy V Y, Shahzad A, Pavlov M D et al. Synthesis of the Ni-Al coatings on different metallic substrates by mechanical alloying and subsequent laser treatment[J]. Journal of Alloys and Compounds, 707, 351-357(2017).

[21] Zhang Y G, Han Y F, Chen G L[M]. Intermetallic compound structural material(2001).

[22] Xie H B, Guan W M, Lv H et al. CuCr/Cu contact material fabricated via high-speed laser cladding[J]. The International Journal of Advanced Manufacturing Technology, 124, 397-410(2023).

[23] Lang Z H. Research on microstructure and properties of metal-ceramic composite coating by laser cladding[D](2011).

[24] Cheng G P, He Y Z. Ni-Al intermetallic coatings prepared by laser-cladding synthesize with Ni-based alloy and Al[J]. Journal of Materials Engineering, 38, 29-33, 37(2010).

[25] Kang Q F. Preparation and properties research of nickel-based alloy coatings by laser cladding on nickel-aluminum bronze[D](2017).

[26] Shi D M, Wen B, Melnik R et al. First-principles studies of Al-Ni intermetallic compounds[J]. Journal of Solid State Chemistry, 182, 2664-2669(2009).

[27] Zhao T, Cai X, Wang S X et al. Effect of CeO2 on microstructure and corrosive wear behavior of laser-cladded Ni/WC coating[J]. Thin Solid Films, 379, 128-132(2000).

[28] Wang G H, Duan Y L, Yang Z C et al. Corrosion resistance of laser cladding TlC/Al3Ti composite coating on the surface of AA6063 aluminum alloy[J]. Materials Protection, 43, 67-69, 90(2010).

[29] Braun R, Fröhlich M, Braue W et al. Oxidation behaviour of gamma titanium aluminides with EB-PVD thermal barrier coatings exposed to air at 900 ℃[J]. Surface and Coatings Technology, 202, 676-680(2007).

[30] Zhang X H. Research on preparation of ceramic-metal composite thermal protective coatings on aluminum alloy surfaces by plasma spray technology and properties of coatings[D](2020).

[31] Qi X, Song R G, Wang C et al. Influence of interfacial stress produced by MAO on electrochemical corrosion and stress corrosion cracking behavior in 7075 aluminum alloy[J]. Journal of the Electrochemical Society, 169, 020559(2022).