[1] H BOCANEGRA-BERNAL M, B MATOVIC. Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures. Materials Science and Engineering: A, 527, 1314-1338(2010).
[2] C DANTE R, K KAJDAS C. A review and a fundamental theory of silicon nitride tribochemistry. Wear, 288, 27-38(2012).
[3] G SUN Y, L HE S, A LIU R et al. Preparation and application of silicon nitride ceramics. China Ceramic Industry, 23, 31-34(2016).
[4] L RILEY F. Silicon nitride and related materials. Journal of the American Ceramic Society, 83, 245-265(2000).
[5] H KLEMM. Silicon nitride for high-temperature applications. Journal of the American Ceramic Society, 93, 1501-1522(2010).
[6] Z KRSTIC, D KRSTIC V. Silicon nitride: the engineering material of the future. Journal of Materials Science, 47, 535-552(2012).
[7] M WANG B. State of the art of advanced ceramic material. Progress in Chemistry, 12, 357-359(2000).
[8] T NISHIMURA, M MITOMO, H SUEMATSU. High temperature strength of silicon nitride ceramics with ytterbium silicon oxynitride. Journal of Materials Research, 12, 203-209(1997).
[9] N CHEN A, M WU J, X HAN L et al. Preparation of Si3N4 foams by DCC method via dispersant reaction combined with protein-gelling. Journal of Alloys and Compounds, 745, 262-270(2018).
[10] R XIE G, G ZHANG X, D CEN X. Study and application of silicon nitride ceramic cutting tool. Tool Engineering, 41, 78-80(2007).
[11] J PYZIK A, R BEAMAN D. Microstructure and properties of self-reinforced silicon nitride. Journal of the American Ceramic Society, 76, 2737-2744(1993).
[12] A NEUMANN, T RESKE, M HELD et al. Comparative investigation of the biocompatibility of various silicon nitride ceramic qualities in vitro. Journal of Materials Science: Materials in Medicine, 15, 1135-1140(2004).
[13] J ORTH, M LUDWIG, W PIENING et al, 28, 372-377(1992).
[14] K KANDI K, N THALLAPALLI, S P R CHILAKALAPALLI. Development of silicon nitride-based ceramic radomes-a review. International Journal of Applied Ceramic Technology, 12, 909-920(2015).
[15] J WU W, J LIU, J ZHANG et al. Preparation and application status of porous Si3N4 ceramic. China Ceramics, 52, 10-13(2016).
[16] H HE J, M WU J, N CHEN A et al. Ceramic materials for additive manufacturing and their forming technologies. Materials China, 39, 337-348(2020).
[17] W CHEN Z, Y LI Z, J LI J et al. 3D printing of ceramics: a review. Journal of European Ceramic Society, 39, 661-687(2019).
[18] S LIU S, M LI, M WU J et al. Preparation of high-porosity Al2O3 ceramic foams via selective laser sintering of Al2O3 poly-hollow microspheres. Ceramics International, 46, 4240-4247(2020).
[19] V WONG K, A HERNANDEZ. A review of additive manufacturing. ISRN Mechanical Engineering, 34, 30-38(2012).
[20] F CHEN, H ZHU, M WU J et al. Preparation and biological evaluation of ZrO2 all-ceramic teeth by DLP technology. Ceramics International, 46, 11268-11274(2020).
[21] K DMITRII A, S PETR S, E ANASTASIYA D et al. Rheological and curing behavior of acrylate-based suspensions for the DLP 3D printing of complex zirconia parts. Materials, 11, 2350-2362(2018).
[22] S LI, W DUAN, T ZHAO et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology. Journal of the European Ceramic Society, 38, 4597-4603(2018).
[23] M WU J, Q YANG Y, C WANG et al. Photopolymerization technologies for ceramics and their applications. Journal of Mechanical Engineering, 56, 221-238(2020).
[24] X SHUAI, Y ZENG, P LI et al. Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology. Journal of Materials Science, 55, 6771-6782(2020).
[25] R HE, W LIU, Z WU et al. Fabrication of complex-shaped zirconia ceramic parts via a DLP-stereolithography-based 3D printing method. Ceramics International, 44, 3412-3416(2018).
[26] B HUA S, H ZHU, M WU J et al. Performance of lattice structure scaffold prepared via digital light processing manufacture by DLP technology. Journal of Chinese Ceramic Society, 49, 608-617(2021).
[27] L GRIFFITH M, W HALLORAN J. Ultraviolet Curing of Highly Loaded Ceramic Suspensions for Stereolithography of. Ceramics. Proc. Solid Freeform Fabr. Symp., 396-403(1994).
[28] Q WU X, J XU C, M ZHANG Z. Preparation and optimization of Si3N4 ceramic slurry for low-cast LCD mask stereolithography. Ceramics International, 47, 9400-9408(2021).
[29] J DING G, J HE R, Q ZHANG K et al. Stereolithography-based additive manufacturing of gray-colored SiC ceramic green body. Journal of the American Ceramic Society, 102, 7198-7209(2019).
[30] J HUANG R, G JIANG Q, D WU H et al. Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolithography method. Ceramics International, 45, 5158-5162(2019).
