A Probe-Shaped Sensor With FBG and Fiber-Tip Bubble for Pressure and Temperature Sensing

Bonan LIU; Junxian LUO; Shen LIU; Yanping CHEN; Bo HUANG; Changrui LIAO; Yiping WANG

doi:10.1007/s13320-020-0612-3

[1] L. Nguyen, S. Warren-Smith, H. Ebendorff- Heidepriem, and T. M.Monro, “Interferometric high temperature sensor using suspended-core optical fibers,” Optics Express, 2016, 24(8): 8967–8977.

[2] Y. Yang, S. Saurabh, J. Ward, and S. Chormaic, “High-Q, ultrathin-walled microbubble resonator for aerostatic pressure sensing,” Optics Express, 2016, 24(1): 294–299.

[3] L. Niu, C. Zhao, H. Gong, and S. Jin, “Curvature sensor based on two cascading abrupt-tapers modal interferometer in single mode fiber,” Optics Communications, 2014, 333: 11–15.

[4] M. Xiong, H. Gong, Z. Wang, C. Zhao, and X. Dong, “Fiber curvature sensor based on spherical-shape structures and long-period grating,” Optics and Lasers in Engineering, 2016, 86: 356–359.

[5] G. Woyessa, K. Nielsen, A. Stefani, C. Markos, and O. Bang, “Temperature insensitive hysteresis free highly sensitive polymer optical fiber Bragg grating humidity sensor,” Optics Express, 2016, 24(2): 1206–1213.

[6] E. Klantsataya, A. Francois, H. Ebendorff- Heidepriem, P. Hoffman, and T. M. Monro, “Surface plasmon scattering in exposed core optical fiber for enhanced resolution refractive index sensing,” Sensors, 2015, 15(10): 25090–25102.

[7] Q. Liu, S. Li, and H. Chen, “Enhanced sensitivity of temperature sensor by a PCF with a defect core based on Sagnac interferometer,” Sensors and Actuators B: Chemical, 2018, 254: 636–641.

[8] Z. Xu, J. Lim, D. Hu, Q. Sun, R. Wong, K. Li, et al., “Investigation of temperature sensing characteristics in selectively infiltrated photonic crystal fiber,” Optics Express, 2016, 24(2): 1699–1707.

[9] L. Shao, J. Hu, H. Lu, J. Du, T. Wu, and Y. Wang, “High-sensitivity temperature sensor based on polarization maintaining fiber Sagnac loop,” Photonic Sensors, 2019, 9(1): 25–32.

[10] R. Xing, C. Dong, Z. Wang, Y. Wu, Y. Yang, and S. Jian, “Simultaneous strain and temperature sensor based on polarization maintaining fiber and multimode fiber,” Optics & Laser Technology, 2018, 102: 17–21.

[11] Y. Wu, L. Pei, W. Jin, Y. Jiang, Y. Yang, Y. Shen, et al., “Highly sensitive curvature sensor based on asymmetrical twin core fiber and multimode fiber,” Optics & Laser Technology, 2017, 92: 74–79.

[12] X. Xu, J. He, C. Liao, K. Yang, K. Guo, C. Li, et al., “Sapphire fiber Bragg gratings inscribed with a femtosecond laser line-by-line scanning technique,” Optics Letters, 2018, 43(19): 4562–4565.

[13] Z. Xu, Y. Luo, Q. Sun, Y. Xiang, P. Shun, and D. Liu, “Switchable single-longitudinal-mode fiber laser based on theta-shaped microfiber filter,” IEEE Photonics Technology Letters, 2018, 30(5): 479–482.

[14] Y. Dong, S. Xiao, H. Xiao, J. Liu, C. Sun, and S. Jian, “An optical liquid-level sensor based on D-shape fiber modal interferometer,” IEEE Photonics Technology Letters, 2017, 29(13): 1067–1070.

[15] L. Bundalo, K. Nielsen, G. Woyessa, and O. Bang, “Long-term strain response of polymer optical fiber FBG sensors,” Optical Materials Express, 2017, 7(3): 967–976.

[16] M. Janczuk-Richter, M. Dominik, E. Razniecka, M. Koba, P. Mikulic, W. J. Bock, et al., “Long-period fiber grating sensor for detection of viruses,” Sensors and Actuators B: Chemical, 2017, 250: 32–38.

[17] Y. Tian, W. Wang, N. Wu, X. Zou, and X. Wang, “Tapered optical fiber sensor for label-free detection of biomolecules,” Sensors, 2011, 11(4): 3780–3790.

[18] W. Talataisong, D. N. Wang, R. Chitaree, C. Liao, and C. Wang, “Fiber in-line Mach-Zehnder interferometer based on an inner air-cavity for high-pressure sensing,” Optics Letters, 2015, 40(7): 1220–1222.

[19] J. Zhu, M. Wang, L. Chen, X. Ni, and H. Ni, “An optical fiber Fabry-Perot pressure sensor using corrugated diaphragm and angle polished fiber,” Optics Fiber Technology, 2017, 34: 42–46.

[20] L. Shao, Y. Luo, Z. Zhang, X. Zou, B. Luo, W. Pan, et al., “Sensitivity-enhanced temperature sensor with cascaded fiber optic Sagnac interferometers based on Vernier-effect,” Optics Communications, 2015, 336: 73–76.

[21] T. Hu, Y. Zhao, and A. Song, “Fiber optic SPR sensor for refractive index and temperature measurement based on MMF-FBG-MMF structure,” Sensors and Actuators B: Chemical, 2016, 237: 521–525.

[22] A. Li, Y. Wang, J. Fang, M. Li, B. Kim, and W. Shieh, “Few-mode fiber multi-parameter sensor with distributed temperature and strain discrimination,” Optics Letters, 2015, 40(7): 1488–1491.

[23] R. M. André, S. C. Warren-Smith, M. Becker, J. Dellith, M. Rothhardt, M. I. Zibaii, et al., “Simultaneous measurement of temperature and refractive index using focused ion beam milled Fabry-Perot cavities in optical fiber micro-tips,” Optics Express, 2016, 24(13): 14053–14065.

[24] B. Yin, S. Wu, M. Wang, W. Liu, H. Li, B. Wu, et al., “High-sensitivity refractive index and temperature sensor based on cascaded dual- wavelength fiber laser and SNHNS interferometer,” Optics Express, 2019, 27(1): 252–264.

[25] C. Liao, S. Liu, L. Xu, C. Wang, Y. Wang, Z. Li, et al., “Sub-micron silica diaphragm-based fiber-tip Fabry-Perot interferometer for pressure measurement,” Optics Letters, 2014, 39(10): 2827–2830.

[26] L. Luo, S. Liu, Y. Zhao, Y. Chen, K. Yang, K. Guo, et al., “Phase-shifted fiber Bragg grating modulated by a hollow cavity for measuring gas pressure,” Optics Letters, 2020, 45(2): 507–510.