Study on Effect of Selective Laser Melting on Formability of GCr15 High Carbon Steel

Liu Shifeng; Li Yunzhe; Zhang Zhichang; Zhang Guangxi; Yang Xin; Wang Yan

doi:10.3788/LOP57.211402

[1] Liu Y Z, Zhou L Y, Zhang C L et al. Development and quality control of bearing steel for heavy equipment[J]. Iron & Steel, 48, 1-8(2013).

[2] Yang Y Q, Wang D, Wu W H. Research progress of direct manufacturing of metal parts by selective laser melting[J]. Chinese Journal of Lasers, 38, 0601007(2011).

[3] Yang Y Q, Chen J, Song C H et al. Current status and progress on technology of selective laser melting of metal parts[J]. Laser & Optoelectronics Progress, 55, 011401(2018).

[4] Li B, Qian B, Xu Y et al. Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: formation mechanism and strengthening effect[J]. Materials Science and Engineering: A, 745, 495-508(2019). http://www.sciencedirect.com/science/article/pii/S0921509319300085

[5] Cacace S, Demir A G, Semeraro Q. Densification mechanism for different types of stainless steel powders in selective laser melting[J]. Procedia CIRP, 62, 475-480(2017).

[6] Krell J, Röttger A, Geenen K et al. General investigations on processing tool steel X40CrMoV5-1 with selective laser melting[J]. Journal of Materials Processing Technology, 255, 679-688(2018).

[7] Yan J J, Zheng D L, Li H X et al. Selective laser melting of H13: microstructure and residual stress[J]. Journal of Materials Science, 52, 12476-12485(2017). http://link.springer.com/10.1007/s10853-017-1380-3

[8] Zong X W, Gao Q, Zhou H Z et al. Effects of bulk laser energy density on anisotropy of selective laser sintered 316L stainless steel[J]. Chinese Journal of Lasers, 46, 0502003(2019).

[9] Chen H Y, Gu D D, Gu R H et al. Microstructure evolution and mechanical properties of 5CrNi4Mo die steel parts by selective laser melting additive manufacturing[J]. Chinese Journal of Lasers, 43, 0203003(2016).

[10] Krell J, Röttger A, Geenen K et al. General investigations on processing tool steel X40CrMoV5-1 with selective laser melting[J]. Journal of Materials Processing Technology, 255, 679-688(2018).

[11] Sander J, Hufenbach J, Giebeler L et al. Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting[J]. Materials & Design, 89, 335-341(2016). http://www.sciencedirect.com/science/article/pii/S0264127515305578

[12] Yamanoglu R, German R M, Karagoz S et al. Microstructural investigation of as cast and PREP atomised Ti-6Al-4V alloy[J]. Powder Metallurgy, 54, 604-607(2011).

[13] Olatunde Olakanmi E, Dalgarno K W, Cochrane R F. Laser sintering of blended Al-Si powders[J]. Rapid Prototyping Journal, 18, 109-119(2012).

[14] Takamichi I[M]. Roderick I L G. The physical properties of liquid metals(1993).

[15] Brice C A, Dennis N. Cooling rate determination in additively manufactured aluminum alloy 2219[J]. Metallurgical and Materials Transactions A, 46, 2304-2308(2015). http://link.springer.com/article/10.1007/s11661-015-2775-x

[16] Li Y L, Gu D D. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder[J]. Materials & Design, 63, 856-867(2014).

[17] Chen S, Tao F H, Jia C Z. Microstructure and mechanical properties of 4Cr5MoSiV1 steel fabricated via selective laser melting post tempering[J]. Chinese Journal of Lasers, 46, 1002005(2019).

[18] Holzweissig M J, Taube A, Brenne F et al. Microstructural characterization and mechanical performance of hot work tool steel processed by selective laser melting[J]. Metallurgical and Materials Transactions B, 46, 545-549(2015). http://smartsearch.nstl.gov.cn/paper_detail.html?id=f54a528217623cff135e0140ab816fc0