Powder Separation and Its Suppression During Laser Cladding of Medical Ti/HA

Wang Chengdong; Bao Zhenlin; Ma Jianpu; Zhang Kedong

doi:10.3788/CJL202047.1202001

[1] Li J C, Zhao Z, Yan R et al. Process parameter optimization and mechanical properties of PA12/HA porous scaffold based on SLS[J]. Chinese Journal of Lasers, 46, 1102003(2019).

[2] Bao Y M, Wang C W, Jin Z W et al. Textured surface on a bioceramic coating via a femtosecond laser and its friction and wear properties[J]. Chinese Journal of Lasers, 46, 0203003(2019).

[3] Sun G F, Tao F, Jiang B et al. Microstructure and biomedical properties of laser alloyed Cu-Co alloys on medical stainless steel[J]. Chinese Journal of Lasers, 45, 1202008(2018).

[4] Qiao B, Jiang D M. Research in materials for bone plate[J]. Journal of Chongqing Medical University, 42, 180-184(2017).

[5] Salman S, Gunduz O, Yilmaz S et al. Sintering effect on mechanical properties of composites of natural hydroxyapatites and titanium[J]. Ceramics International, 35, 2965-2971(2009). http://www.sciencedirect.com/science/article/pii/S0272884209001618

[6] Berezhnaya A Y, Mittova V O, Kostyuchenko A V et al. Solid-phase interaction in the hydroxyapatite/titanium heterostructures upon high-temperature annealing in air and argon[J]. Inorganic Materials, 44, 1214-1217(2008). http://link.springer.com/article/10.1134/S0020168508110137

[7] Han C J, Li Y, Wang Q et al. Titanium/hydroxyapatite (Ti/HA) gradient materials with quasi-continuous ratios fabricated by SLM: material interface and fracture toughness[J]. Materials & Design, 141, 256-266(2018). http://smartsearch.nstl.gov.cn/paper_detail.html?id=97a35b9e71233174ba2e01f24fc88e11

[8] Li F Q, Wang S L, Chen Y B et al. Investigation of bioceramic composite coatings fabricated by laser cladding on Ti6Al4V surface[J]. Chinese Journal of Lasers, 42, 0603005(2015).

[9] Li W, Zhang J W, Zhang X C et al. Effect of optimizing particle size on directed energy deposition of functionally graded material with blown pre-mixed multi-powder[J]. Manufacturing Letters, 13, 39-43(2017).

[10] Li W, Karnati S, Zhang Y L et al. Investigating and eliminating powder separation in pre-mixed powder supply for laser metal deposition process[J]. Journal of Materials Processing Technology, 254, 294-301(2018).

[11] Zheng X, Xue L, Huang W D. Powder proportion during laser solid forming from blended element powders[J]. Hot Working Technology, 41, 21-23(2012).

[12] Yan J Y, Battiato I, Fadel G M. Planning the process parameters for the direct metal deposition of functionally graded parts based on mathematical models[J]. Journal of Manufacturing Processes, 31, 56-71(2018).

[13] Wen S Y, Shin Y C, Murthy J Y et al. Modeling of coaxial powder flow for the laser direct deposition process[J]. International Journal of Heat and Mass Transfer, 52, 5867-5877(2009).

[14] Zekovic S, Dwivedi R, Kovacevic R. Numerical simulation and experimental investigation of gas-powder flow from radially symmetrical nozzles in laser-based direct metal deposition[J]. International Journal of Machine Tools and Manufacture, 47, 112-123(2007).

[15] Morsi S, Alexander A J. An investigation of particle trajectories in two-phase flow systems[J]. Journal of Fluid Mechanics, 55, 193-208(1972).

[16] Fluent Inc. Fluent 6.3 user manual[M]. Canonsburg, Pennsylvania, USA: [s.n.](2006).

[17] Haider A, Levenspiel O. Drag coefficient and terminal velocity of spherical and nonspherical particles[J]. Powder Technology, 58, 63-70(1989).

[18] Pan H, Sparks T, Thakar Y D et al. The investigation of gravity-driven metal powder flow in coaxial nozzle for laser-aided direct metal deposition process[J]. Journal of Manufacturing Science and Engineering, 128, 541-553(2006).