[1] Kong Dejun, Zhang Lei, Song Renguo, et al.. Effect of laser quenching on fatigue properties and fracture morphologies of 40CrNiMo high strength steel[J]. Chinese J Lasers, 2013, 40(11): 1103005.

[2] Sun Ronglu, Niu Wei, Lei Yiwen, et al.. Microstructure and frictional wear properties of laser clad in situ CrxSy/Ni composite coating[J]. Chinese J Lasers, 2013, 40(10): 1003005.

[3] Zhang Xiaowei, Liu Hongxi, Jiang Yehua, et al.. Research progress of functional composite coatings on Ti6Al4V alloy surface prepared by laser cladding technique[J]. Rare Metal Materials Engineering, 2012, 41(1): 178-183.

[4] Olivier Brucelle, Gerard Bernhart. Methodology for service life increase of hot forging tools[J]. Journal of Materials Processing Technology, 1999, 87(1-): 237-246.

[5] Mohamed Kchaou, Riadh Ellecuch, Yannick Desplanques, et al.. Failure mechanisms of H13 die on relation to the forging process-A case study of brass gas valves[J]. Engineering Failure Analysis, 2010, 17(2): 403-415.

[6] Min Yongan, Wu Xiaochun, Wang Rong, et al.. Prediction and analysis on oxidation of H13 hot work steel[J]. Journal of Iron and Steel Research, International, 2006, 13(1): 44-49.

[7] Cui Xianghong, Wang Shuqi, Jiang Qichuan, et al.. Research on thermal wear of cast hot forging die steel modified by rare earths[J]. Journal of Rare Earths, 2007, 25(1): 88-92.

[8] D Papageorgiou, C Medrea, N Kyriakou. Failure analysis of H13 working die used in plastic injection moulding[J]. Engineering Failure Analysis, 2013, 35(15): 355-359.

[9] Tang Xiaodan,Yao Jianhua, Kong Fanzhi, et al.. Manufacture and microstructure performance of H13-TiC gradient composite coating made by laser cladding[J]. Laser Technology, 2010, 34(3): 18-21.

[10] Zhang Wei. Research on microstructure and property of Fe-VC composite material made by laser cladding[J]. Physics Procedia, 2012, 25: 200-204.

[11] J H Lee, J H Jang, B D Joo, et al.. Application of direct laser metal tooling for AISI H13 tool steel[J]. Transactions of Nonferrous Metals Society of China, 2009, 19(1): S284-S287.

[12] B D Joo, J H Jang, J H Lee, et al.. Selective laser melting of Fe-Ni-Cr layer on AISI H13 tool steel[J]. Transaction of Nonferrous Metals Society of China, 2009, 19(4): 921-924.

[13] W H Jiang, R Kovacevict. Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance[J]. Journal of Materials Processing Technology, 2007, 186: 331-338.

[14] Yang Sen, Zhong Minlin, Liu Wenjin. TiC particulate composite coating produced in situ by laser cladding[J]. Materials Science and Engineering A, 2003, 343(1-2): 57-62.

[15] Ali Emamian, Stephen F Corbin, Amir Khajepour. The influence of combined laser parameters on in-situ formed TiC morphology during laser cladding[J]. Surface & Coatings Technology, 2011, 206(1): 124-131.

[16] Zhang Xiaowei, Liu Hongxi, Jiang Yehua, et al.. Laser in-situ synthesized TiN/Ti3Al composite coatings[J]. Acta Metallurgica Sinica, 2011, 47(8): 1086-1093.

[17] Ali Emamia, Stephen F Corbin, Amir Khajepour. Tribology characteristics of in-situ laser deposition of the Fe-TiC[J]. Surface and Coatings Technology, 2012, 206(22): 4495-4501.

[18] Zhang Xianhu, Chao Mingju, Liang Erjun, et al.. In-situ synthesis of TiC-ZrC particulate reinforced Ni-Based composite coatings by laser cladding[J]. Chinese J Lasers, 2009, 36(4): 998-1004.

[19] Ye Dalun, Hu Jianhua. Practical Inorganic Thermodynamic Databook[M]. Second edition, Beijing: Metallurgical Industry Press, 2002. 1-25.

[20] Youlu Yuan, Zhuguo Li. Analysis of nucleation of carbide (Cr, Fe)7C3 in the Cr3C2/Fe-CrNiBSi composite coating[J]. Surface & Coatings Technology, 2013, 228(15): 41-47.

[21] X H Wang, M Zhang, X M Liu, et al.. Microstructure and wear properties of TiC/FeCrBSi surface composite coating prepared by laser cladding[J]. Surface & Coatings Technology, 2008, 202(15): 3600-3606.

[22] Xu Ning, Zhang Qunli, Yao Jianhua. Microstructure of in-site synthesis TiC hardened coating by laser irradiation[J]. Chinese J Lasers, 2010, 37(10): 2653-2657.