[1] John G. E, Mitral V, Gerald S. B, et al. High Power Diode Laser Arrays ［J］. IEEE Journal of Quantum Electronics, 1992, 28(4): 952-965.
[2] Treusch H G, Ovtchinnikov A, He X, et al. High-brightness semiconductor laser sources for materials processing: stacking, beam shaping, and bars ［J］. IEEE Journal of Selected Topics in Quantum Electronics, 2000, 6(4): 601-614.
[3] Ziegler M, Tomm J W, Elsaesser T, et al. Real-time thermal imaging of catastrophic optical damage in red-emitting high-power diode lasers ［J］. Applied Physics Letters, 2008, 92(10): 103514.
[4] Qiao Y B, Feng S W, Xiong C, et al. Spatial hole burning degradation of AlGaAs/GaAs laser diodes. Applied Physics Letters, 2011, 99(10): 103506.
[5] Bull S, Tomm J W, Larkins E C. Identification of degradation mechanisms in high-power laser bars using by-emitter degradation studies ［J］. Journal of Materials Science: Materials in Electronics, 2008, 19(1): s145-s149.
[6] Tomm J W, Ziegler M, Oudart M, et al. Gradual degradation of GaAs-based quantum well lasers, creation of defects, and generation of compressive strain ［J］. physica status solidi(a), 2009, 206(8): 1912-1915.
[7] Rinner F, Rogg J, Kelemen M T, et al. Facet temperature reduction by a current blocking layer at the front facets of high-power InGaAs/AlGaAs lasers ［J］. Journal of applied physics, 2003, 93(3): 1848-1850.
[8] Hempel M, Tomm J W, Hennig P, et al. Emission properties of diode laser bars during pulsed high-power operation ［J］. Semiconductor Science and Technology, 2011, 26(9): 092001.
[9] Liu X, Hu M H, Caneau C G, et al. Thermal management strategies for high power semiconductor pump lasers ［J］. IEEE Transactions on Components and Packaging Technologies, 2006, 29(2): 268-276.
[10] Fukuda M. Reliability and degradation of semiconductor lasers and LEDs［M］. Boston: Artech House, 1991.
[11] Laikhtman B, Gourevitch A, Westerfeld D, et al. Thermal resistance and optimal fill factor of a high power diode laser bar ［J］. Semiconductor science and technology, 2005, 20(10): 1087-1095.
[12] Amuzuvi C K, Bull S, Tomm J W, et al. The impact of temperature and strain-induced band gap variations on current competition and emitter power in laser bars ［J］. Applied Physics Letters, 2011, 98(24): 241108.
[13] Qiao Y, Feng S, Xiong C, et al. The thermal properties of AlGaAs/GaAs laser diode bars analyzed by the transient thermal technique ［J］. Solid-State Electronics, 2013, 79: 192-195.
[15] Martín-Martín A, Avella M, Iiguez M P, et al. Thermomechanical model for the plastic deformation in high power laser diodes during operation ［J］. Journal of Applied Physics, 2009, 106(7): 073105.
[16] Ziegler M, Weik F, Tomm J W, et al. Transient thermal properties of high-power diode laser bars ［J］. Applied physics letters, 2006, 89(26): 263506.
