[1] Bai Yu, Liao Zhiyuan, Liao Sheng, et al. Infrared dual band athermal optical system with common aperture[J]. Optics and Precision Engineering, 2016, 24(2): 268-277. (in Chinese)
[2] Liang Chao, Ma Tianxiang. Design of infrared imaging nonuniform correction system based on black body calibration[J]. Chinese Journal of Optics, 2016, 9(3):385-393. (in Chinese)
[3] Hong Jin, Wang Zhengyun, Hu Yadong, et al. Research of life test and design of system for satellite-borne infrared detector assembly[J]. Optics and Precision Engineering, 2018, 26(5): 1148-1155. (in Chinese)
[4] Pham T, Du W, Tran H, et al. Systematic study of Si-based GeSn photodiodes with 26 μm detector cutoff for short-wave infrared detection[J]. Optics Express, 2016, 47: 1-18.
[5] Tong Z, Lin C, Chen H, et al. MTF measurement and analysis of linear array HgCdTe infrared detectors[J]. Infrared Physics & Technology, 2018, 8: 123-127.
[6] Zhang Ying, Liu Zhiguo, Guo Zhuanyun, et al. A high-sensitivity fiber grating pressure sensor and its pressure sensing characteristics[J]. Acta Optica Sinica, 2002, 22(1): 89-91. (in Chinese)
[7] Pan Yongqiang, Hang Lingxia, Liang Haifeng, et al. Ultrabroad band and hard infrared antireflection coatings on znse for 2~16 μm[J]. Acta Optica Sinica, 2010, 30(4): 1201-1204. (in Chinese)
[8] Zhang Yuegang, Wang Ying, Sun Xuezheng, et al. Design and fabrication of short-wave/longwave infrared dichroic beam splitter[J]. Acta Optica Sinica, 2010, 30(2): 597-601. (in Chinese)
[9] Mi Gaoyuan, Zhang Jianfu, Han Jun, et al. Research on antireflection coating for TV, laser, mid-infrared wavebands[J]. Laser & Infrared, 2016, 46(5): 593-596. (in Chinese)
[10] Yan Langqin, Zhang Shuyu, Liu Wei, et al. Study on high transmittance and more stable antireflection film on germanium for 8~11.5 μm[J]. Infrared and Laser Engineering, 2010, 39(5): 871-874. (in Chinese)
[11] Shi G, Mei L, Zhang L C. Characterization of optical and microstructural properties of AlF3 thin films deposited on spherical element[J]. Chinese Journal of Optics, 2013, 6(6): 906-911. (in Chinese)
[12] Wang Duoshu, Li Youlu, Li Kaipang, et al. Research method of the temperature characterisitic of infrared thin-film[J]. Infrared and Laser Engineering, 2018, 47(4): 0404006. (in Chinese)
[13] Willey Ronald R, Baumeister P. Predicting achievable design performance of broadband antireflection coatings[J]. Applied Optics, 1993, 32(28): 5447-5451.
[14] Baumeister P. Design of multilayer filters by successive approximations[J]. Journal of the Optical Society of America, 1958, 48(12): 955-957.
[15] Nakazawa S, Toyoda N, Mochiji K. Fluoride thin film formation with low optical absorption by gas cluster ion beam assisted deposition.[J] Nuclear Instruments & Methods in Physics Research, 2016, 261(1-2): 656-659.
[16] De R, Haque S M, Tripathi S, et al. Effect of sputtering power on MgF2 thin films deposited by sputtering technique under fluorine trapping[C]//Dae Solid State Physics Symposium, 2016.
[17] Lu Z, Yang K, Ai Y, et al. Crystal quality improvement of sputtered AlN film on sapphire substrate by high-temperature annealin[J]. Journal of Materials Science Materials in Electronics, 2018: 1-8.
[18] Qian Dahan, Jia Jia, Chen Liulian, et al. Recent progress in evaluation of thin film adhesion in optoelectronic device[J]. Infrared, 2011, 32(1): 10-15. (in Chinese)
