Study on the influence rule of porosity defects for double-sided laser beam welding of aluminum alloy T-joint

Yang Zhibin; Li Haozhe; Wang Bin; Chen Yuxin

doi:10.3788/irla201847.0906004

[1] Siqueira R H M, Capella A, Riva R, et al. Comparing mechanical behavior of aluminum welds produced by Laser Beam Welding (LBW), Friction Stir Welding (FSW) and riveting for aeronautic structures [J]. Welding International, 2016, 19: 1-7.

[2] Peng Jin, Zhang Wenjie, Wang Xingxing, et al. Numerical simulation of effect of filler wire melting and filling mode on molten pool in laser welding [J]. Infrared and Laser Engineering, 2018, 47(3): 0306005. (in Chinese)

[3] Zhang Xinge, Li Liqun, Chen Yanbin, et al. Process and mechanical properties of laser-resistance hybrid welding for aluminum alloy T-joint [J]. Infrared and Laser Engineering, 2010, 39(1): 138-142. (in Chinese)

[4] Sun Z Q, Chen R, Wu A R. New materials and technology of Chinese civil aircraft [C]//Proc ICAMCS, 2016: 926-930.

[5] Janasekaran S, Jamaludin M F, Muhamad M R, et al. Autogenous double-sided T-joint welding on aluminum alloys using low power fiber laser [J]. International Journal of Advanced Manufacturing Technology, 2017, 90: 3497-3505.

[6] Oliveira A C, Siqueira R H M, Riva R, et al. One-sided laser beam welding of autogenous T-joints for 6013-T4 aliminium alloy [J]. Material and Design, 2015, 65: 726-736.

[7] Enz J, Khomenko V, Riekehr S, et al. Single-sided laser beam welding of a dissimilar AA2024-AA7050 T-joint[J]. Mater Des, 2015, 76: 110-116.

[8] Tao W, Yang Z B, Chen Y B, et al. Double-sided fiber laser beam welding process of T-joints for aluminum aircraft fuselage panels: Filler wire melting behavior, process stability, and their effects on porosity defects[J]. Opt Laser Technol, 2013, 52: 1-9.

[9] Qi Junfeng, Niu Zhen, Zhang Dongyun, et al. Control of shaping of welds for CO2 laser welding shipbuilding T-section aluminum alloy [J]. Chinese Journal of Lasers, 2008, 35(2): 297-302. (in Chinese)

[10] Ma Xuyi, Gong Shuili, Zhang Jiuxing, et al. Influence of the welding conditions on weld defects in double-sided laser beam welded T-joints of Ti-6Al-4V alloy [J]. Chinese Journal of Lasers, 2016, 43(2): 0203006. (in Chinese)

[11] Yang Z B, Tao W, Li L Q, et al. Numerical simulation of heat transfer and fluid flow during double-sided laser beam welding of T-joints for aluminum aircraft fuselage panels [J]. Opt Laser Technol, 2017, 91: 120-129.

[12] Chen Kai, Yang Wuxiong, Huang Rui, et al. Porosity control of 1420 Al-Li alloy by dual-beam laser welding [J]. Infrared and Laser Engineering, 2010, 39(1): 133-137. (in Chinese)

[13] Ma Yinan, Tao Wang, Chen Yanbin. Laser spot welding of LF6 aluminum with double laser beams [J]. Infrared and Laser Engineering, 2014, 43(3): 707-711. (in Chinese)

[14] Lin R, Wang H P, Lu F, et al. Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloys [J]. International Journal of Heat and Mass Transfer, 2017, 108: 244-256.