• Acta Optica Sinica
  • Vol. 42, Issue 7, 0706008 (2022)
Zhikang Zhuang1,2, Yuangang Lu1,2,*, Jianqin Peng1,2, and Chongjun He1,2
Author Affiliations
  • 1Key Laboratory of Space Photoelectric Detection and Perception of Ministry of Industry and Information Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 211106, China
  • 2College of Science, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 211106, China
  • show less
    DOI: 10.3788/AOS202242.0706008 Cite this Article Set citation alerts
    Zhikang Zhuang, Yuangang Lu, Jianqin Peng, Chongjun He. Fiber-Optic Macrobending-Based Temperature Sensor with Polyimide Coating[J]. Acta Optica Sinica, 2022, 42(7): 0706008 Copy Citation Text show less
    References

    [1] Marcuse D. Curvature loss formula for optical fibers[J]. Journal of the Optical Society of America, 66, 216-220(1976).

    [2] Renner H. Bending losses of coated single-mode fibers: a simple approach[J]. Journal of Lightwave Technology, 10, 544-551(1992).

    [3] Faustini L, Martini G. Bend loss in single-mode fibers[J]. Journal of Lightwave Technology, 15, 671-679(1997).

    [4] Wang Q, Farrell G, Freir T. Theoretical and experimental investigations of macro-bend losses for standard single mode fibers[J]. Optics Express, 13, 4476-4484(2005).

    [5] Peng X L, Cha Y P, Zhang H et al. Temperature response properties of macrobending loss of single-mode fiber[J]. Acta Photonica Sinica, 47, 1106006(2018).

    [6] Rajan G, Semenova Y, Mathew J et al. Experimental analysis and demonstration of a low cost fibre optic temperature sensor system for engineering applications[J]. Sensors and Actuators A: Physical, 163, 88-95(2010).

    [7] Peng X L, Cha Y P, Zhang H et al. Light intensity modulation temperature sensor based on U-shaped bent single-mode fiber[J]. Optik, 130, 813-817(2017).

    [8] Nam S H, Yin S Z. High-temperature sensing using whispering gallery mode resonance in bent optical fibers[J]. IEEE Photonics Technology Letters, 17, 2391-2393(2005).

    [9] Raikar U S, Lalasangi A S, Kulkarni V K et al. Temperature dependence of bending loss in single mode communication fiber: effect of fiber buffer coating[J]. Optics Communications, 273, 402-406(2007).

    [10] Moraleda A T, García C V, Zaballa J Z et al. A temperature sensor based on a polymer optical fiber macro-bend[J]. Sensors, 13, 13076-13089(2013).

    [11] Leal-Junior A, Frizera A, Marques C et al. Polymer-optical-fiber-based sensor system for simultaneous measurement of angle and temperature[J]. Applied Optics, 57, 1717-1723(2018).

    [12] Tapetado A, Pinzón P J, Zubia J et al. Polymer optical fiber temperature sensor with dual-wavelength compensation of power fluctuations[J]. Journal of Lightwave Technology, 33, 2716-2723(2015).

    [13] Wang P F, Semenova Y, Wu Q et al. Macrobending single-mode fiber-based refractometer[J]. Applied Optics, 48, 6044-6049(2009).

    [14] Wang P F, Semenova Y, Li Y et al. A macrobending singlemode fiber refractive index sensor for low refractive index liquids[J]. Photonics Letters of Poland, 2, 67-69(2010).

    [15] Zheng Y, Xiao W, Zhu Z W. Research on an optical fiber linear displacement sensor based on bending loss for use over large range[J]. Acta Optica Sinica, 40, 1206002(2020).

    [16] Xiao D, Wan S P, Yin X et al. Pulse acquisition system based on curved optical fiber sensor head[J]. Laser & Optoelectronics Progress, 58, 0506003(2021).

    [17] Nguyen N Q, Gupta N. Power modulation based fiber-optic loop-sensor having a dual measurement range[J]. Journal of Applied Physics, 106, 033502(2009).

    [18] Cheng L, Li Y M, Ma Y M et al. The sensing principle of a new type of crack sensor based on linear macro-bending loss of an optical fiber and its experimental investigation[J]. Sensors and Actuators A: Physical, 272, 53-61(2018).

    [19] Her S C, Lin W N. Simultaneous measurement of temperature and mechanical strain using a fiber Bragg grating sensor[J]. Sensors, 20, 4223(2020).

    [20] Hu B Y, Wen F R, Cheng Y S et al. Simultaneous measurement of temperature and pressure based on cascaded Fabry-Perot interferometer[J]. Laser & Optoelectronics Progress, 58, 1906006(2021).

    [21] Wang Q S, Wang W J, Guo X et al. Error correction method for distributed fiber Raman temperature sensor[J]. Laser & Optoelectronics Progress, 57, 170602(2020).

    [22] Lee H, Noda K, Mizuno Y et al. Distributed temperature sensing based on slope-assisted Brillouin optical correlation-domain reflectometry with over 10 km measurement range[J]. Electronics Letters, 55, 276-278(2019).

    [23] Song X F. Research and progress of polyimide[J]. Fiber Composites, 24, 33-37(2007).

    [24] Peng X L, Zhang H, Li Y L. Simulation study on influencing factors of macrobending loss of optical fiber[J]. Laser & Infrared, 44, 1132-1136(2014).

    [25] Wang P F, Rajan G, Semenova Y et al. Temperature dependence of a macrobending edge filter based on a high-bend loss fiber[J]. Optics Letters, 33, 2470-2472(2008).

    [26] Bai W, Yang M H, Dai J X et al. Novel polyimide coated fiber Bragg grating sensing network for relative humidity measurements[J]. Optics Express, 24, 3230-3237(2016).

    [27] Gu S J. Development and performance research of fluorinated polyimides coated fiber Bragg grating humidity sensor[D]. Harbin: Harbin Institute of Technology, 25-30(2012).

    [28] Xing X K, Jiang X, Liu F F et al. TN. 20210816.1529.040.html.(1690).

    Zhikang Zhuang, Yuangang Lu, Jianqin Peng, Chongjun He. Fiber-Optic Macrobending-Based Temperature Sensor with Polyimide Coating[J]. Acta Optica Sinica, 2022, 42(7): 0706008
    Download Citation