[1] L SHI, Y YIN, S WANG et al. Rational catalyst design for N₂ reduction under ambient conditions: strategies towards enhanced conversion efficiency. ACS Catalysis, 10, 6870-6899(2020).

[2] L LIU. Multiscale structural characterization of shaped catalysts. Trends in Chemistry, 3, 898-901(2021).

[3] Y DENG Z, T FUKASAWA, M ANDO et al. High-surface-area alumina ceramics fabricated by the decomposition of Al(OH)₃. Journal of the American Ceramic Society, 84, 485-491(2010).

[4] A NIJMEIJER, H KRUIDHOF, R BREDESEN et al. Preparation and properties of hydrothermally stable-alumina membranes. Journal of the American Ceramic Society, 84, 136-140(2010).

[5] RODIANSONO, ASTUTI MD, R MUJIYANTI D et al. Novel preparation method of bimetallic Ni-In alloy catalysts supported on amorphous alumina for the highly selective hydrogenation of furfural. Molecular Catalysis, 445, 52-60(2018).

[6] Y HE, S LIU, C PRIEST et al. Atomically dispersed metal-nitrogen- carbon catalysts for fuel cells: advances in catalyst design, electrode performance, and durability improvement. Chemical Society Reviews, 49, 3484-3524(2020).

[7] R CHEN, Q LIAN, J WANG et al. A stereolithographic diamond- mixed resin slurry for complex SiC ceramic structure. Journal of the European Ceramic, 41, 3991-3999(2021).

[8] Y LAKHDAR, C TUCK, J BINNER et al. Additive manufacturing of advanced ceramic materials. Progress in Materials Science, 116, 100736(2021).

[9] H BIKAS, P STAVROPOULOS, G CHRYSSOLOURIS. Additive manufacturing methods and modelling approaches: a critical review. The International Journal of Advanced Manufacturing Technology, 83, 389-405(2016).

[10] M SALMI. Additive manufacturing processes in medical applications. Materials, 14, 191(2021).

[11] S ZHAO, G SIQUEIRA, S D RDOVA et al. Additive manufacturing of silica aerogels. Nature, 584, 387-392(2020).

[12] Y XING H, B ZOU, Y LIU X et al. Original Fabrication strategy of complicated Al₂O₃-Si₃N₄ functionally graded materials by stereolithography 3D printing. Journal of the European Ceramic Society, 40, 5797-5809(2020).

[13] T ZHOU, L ZHANG, Q YAO et al. SLA 3D printing of high quality spine shaped β-TCP bioceramics for the hard tissue repair applications. Ceramics International, 46, 7609-7614(2019).

[14] H STRAATHOF M, C DRIEL, J LINGEN et al. Development of propellant compositions for vat photopolymerization additive manufacturing. Propellants, Explosives, Pyrotechnics, 45, 36-52(2020).

[15] X XU, A AWAD, R MARTINEZ P et al. Vat photopolymerization 3D printing for advanced drug delivery and medical device applications. Journal of Controlled Release, 329, 743-757(2020).

[16] N WEI L, L JIA M, M ZHOU et al. Vat polymerization-based bioprinting-process, materials, applications and regulatory challenges. Biofabrication, 12, 022001(2020).

[17] H QUAN, T ZHANG, H XU et al. Photo-curing 3D printing technique and its challenges. Bioactive Materials, 5, 110-115(2020).

[18] J BAE C, A RAMACHANDRAN, W HALLORAN J. Quantifying particle segregation in sequential layers fabricated by additive manufacturing. Journal of the European Ceramic Society, 38, 4082-4088(2018).

[19] Y LIU, J CHENG L, H LI et al. Formation mechanism of stereolithography of Si₃N₄ slurry using silane coupling agent as modifier and dispersant. Ceramics International, 46, 14583-14590(2020).

[20] J SUN, J BINNER, J BAI. Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography. Journal of the European Ceramic Society, 39, 1660-1667(2019).

[21] J ZHANG, L WEI, X MENG et al. Digital light processing- stereolithography three-dimensional printing of yttria-stabilized zirconia. Ceramics International, 46, 8745-8753(2020).

[22] Z SHUAI, S NA, Z ZHE. Surface modification of α-Al₂O₃ with dicarboxylic acids for the preparation of UV-curable ceramic suspensions. Journal of the European Ceramic Society, 37, 1607-1616(2017).

[23] Q ZHANG K, C XIE, G WANG et al. High solid loading, low viscosity photosensitive Al₂O₃ slurry for stereolithography based additive manufacturing. Ceramics International, 45, 203-208(2019).

[24] O DUFAUD, P MARCHAL, S CORBEL. Rheological properties of PZT suspensions for stereolithography. Journal of the European Ceramic Society, 22, 2081-2092(2002).

[25] X WU, Q LIAN, D LI et al. Effects of soft-start exposure on the curing characteristics and flexural strength in ceramic projection stereolithography process. Journal of the European Ceramic Society, 39, 3788-3796(2019).

[26] X LI, J ZHANG, Y DUAN et al. Rheology and curability characterization of photosensitive slurries for 3D printing of Si₃N₄ ceramics. Applied Sciences, 10, 6438(2020).

[27] S GENTRY, W HALLORAN J. Light scattering in absorbing ceramic suspensions: effect on the width and depth of photopolymerized features. Journal of the European Ceramic Society, 35, 1895-1904(2015).

[28] A BADEV, Y ABOULIATIM, T CHARTIER et al. Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography. Journal of Photochemistry and Photobiology A-Chemistry, 222, 117-122(2011).

[29] Y ZHANG, Y XU, A SIMON-MASSERON et al. Radical photoinitiation with LEDs and applications in the 3D printing of composites. Chemical Society Reviews, 50, 3824-3841(2021).