Simulation Analysis of Aspherical Lens Molding Based on Generalized Maxwell Model

Jun Hu; Kaile Xu; Zhuangzhuang Ma; Qiang Ma

doi:10.3788/LOP57.092201

[1] Chen F J, Yin S H, Fan Y F et al. Ultra-precision single-point grinding technique and profile error compensation method for machining aspheric mould[J]. Journal of Mechanical Engineering, 46, 186-191(2010).

[2] Fu X H, Jiang H Y, Zhang J et al. Preparation of short and medium wave infrared anti-reflective coating based on chalcogenide glass[J]. Chinese Journal of Lasers, 44, 0903002(2017).

[3] Zhou T F, Xie J Q, Liang Z Q et al. Advances and prospects of molding for optical microlens array[J]. Chinese Journal of Optics, 10, 603-618(2017).

[4] Yan J W, Zhou T F, Masuda J et al. Modeling high-temperature glass molding process by coupling heat transfer and viscous deformation analysis[J]. Precision Engineering, 33, 150-159(2009).

[5] Yin S H, Huo J J, Zhou T F et al. Simulation of the heating and pressing parameters of micro aspheric lens molding process[J]. Journal of Hunan University(Natural Sciences), 38, 35-39(2011).

[6] Yin S H, Jin S, Zhu K J et al. Stress analysis of compression molding of aspherical glass lenses using finite element method[J]. Opto-Electronic Engineering, 37, 111-115, 143(2010).

[7] Jain A. Experimental study and numerical anslysis of compression molding process for manufacturing precision aspherical glass lenses[D]. Columbus: The Ohio State University(2006).

[8] Liu W G, Shen P. Viscoelastic properties of chalcogenide glasses and simulation of molding process[J]. Infrared and Laser Engineering, 41, 569-574(2012).

[9] Zhang X B, Yin S H, Zhu K J et al. Simulation of compression molding aspherical glass lenses based on generalized Maxwell model[J]. Materials Review, 27, 148-152(2013).

[10] Wang Z B, Li J Q, Zhang F et al. The design of mold with simulation for chalcogenide glass precision molding[J]. Opto-Electronic Engineering, 43, 53-58(2016).

[11] Ni J J, Fan Y F, Chen W H. Simulation study of molding of aspherical optical glass lens[J]. Laser & Optoelectronics Progress, 50, 032201(2013).

[12] Liu X R, Xue C X. Optimization of molding process parameters of chalcogenide glass based on finite element simulation[J]. Laser & Optoelectronics Progress, 55, 082203(2018).

[13] Chen K[M]. Experimental design and analysis, 72-136(2005).