[1] Li Fei, Zou Jianglin, Kong Xiaofang, et al. Experimental research on high power fiber laser-TIG hybrid welding［J］. Chinese J Lasers, 2014, 41(5): 0503004.
[3] Guo Meng, Li Dawei, Wu Jianbo, et al. Calculation of power spectral density of beam modulation induced by plasma scalds［J］. Chinese J Lasers, 2015, 42(2): 0202001 .
[4] Chen G Y, Mei L F, Zhang B, et al. Experiment and numerical simulation study on laser truing and dressing of bronze-bonded diamond wheel［J］. Opt Laser Eng, 2010, 48(3): 295-304.
[5] Deng H, Chen G Y, Zhou C, et al. Processing parameter optimization for the laser dressing of bronze-bonded diamond wheels［J］. Appl Surf Sci, 2014, 290(3): 475-481.
[6] Chen Genyu, Deng Hui, Xu Jianbo, et al. Plasma characterization studies of laser dressing for bronze-bonded diamond wheel［J］. Acta Physica Sinica, 2013, 62(14): 144204.
[7] Hafeez S, Shaikh N M, Rashid B, et al. Plasma properties of laser-ablated strontium target［J］. J Appl Phys, 2008, 103(8): 083117.
[8] Griem H R. Plasma spetroscopy［M］. New York: McGraw-Hill, 1964: 1-55.
[9] Shaikh N M, Hafeez S, Kalyar M A, et al. Spectroscopic characterization of laser ablation brass plasma［J］. J Appl Phys, 2008, 104(10): 103108.
[10] Fader W J. Hydrodynamic model of a spherical plasma produced by Q-spoiled laser irradiation of a solid particle［J］. Physics of Fluids, 1968, 11(10): 2200.
[11] Li Zhihua, Zhang Duanming, Chen Zhongjun, et al. Study on the mechanism of the depositon process of KTN thin film by pulsed laser［J］. Acta Physica Sinica, 2001, 50(2): 1950-1955.
[12] Singh R K, Narayan J. Pulsed-laser evaporation technique for deposition of thin films: Physics and theoretical model［J］. Phys Rev B, 1990, 41: 8843.
[13] Tan X Y, Zhang D M, Feng S Q, et al. A new dynamics expansion mechanism for plasma during pulsed laser deposition［J］. Chinese Physics Letters, 2008, 25(1): 198-201.
[14] Guha A, Samanta S. Effect of thermophoresis and its mathematical models on the transport and deposition of aerosol particles in natural convective flow on vertical and horizontal plates［J］. J Aerosol Scl, 2014, 77: 85-101.
[15] O′Brien T J. A multiphase turbulence theory for gas-solid flows: I. Continuity and momentum equations with Favre-averaging［J］. Powder Technol, 2014, 265: 83-87.
[16] Wang J W, Zhou Q, Hong K, et al. An EMMS-based multi-fluid model (EFM) for heterogeneous gas-solid riser flows: Part I. formulation of structure-dependent conservation equations［J］. Chem Eng Sci, 2012, 75(25): 376-389.
[17] Freddy C, Song H, Ellis Y Y. Scattering equations and Kawai-Lewellen-Tye orthogonality［J］. Phys Rev D, 2014, 90(6): 065001.
[18] Schmidt-Bleker A, Winter J, Iseni S, et al. Reactive species output of a plasma jet with a shielding gas device-combination of FTIR absorption spectroscopy and gas phase modeling［J］. J Phys D: Appl Phys, 2014, 47(14): 145201.
[19] Bai X S, Ma Q L, Motto-Ros V, et al. Convoluted effect of laser fluence and pulse duration on the property of a nanosecond laser-induced plasma into an argon ambient gas at the atmospheric pressure［J］. J Appl Phys, 2013, 113(1): 013304.
[20] Cai S, Chen G Y, Zhou C. Research and application of surface heat treatment for multipulse laser ablation of materials［J］. Appl Surf Sci, 2015, 355: 461-472.
[21] Haught A F, Polk D H. High-temperature plasmas produced by laser beam irradiation of single solid particles［J］. Physics of Fluids, 1966, 9(10): 2047-2056.
