• Infrared and Laser Engineering
  • Vol. 47, Issue 4, 404005 (2018)
Li Guolin1、*, Ji Wenhai1, and Wang Yiding2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.3788/irla201847.0404005 Cite this Article
    Li Guolin, Ji Wenhai, Wang Yiding. Design and experiment of mid-infrared differential CO detector[J]. Infrared and Laser Engineering, 2018, 47(4): 404005 Copy Citation Text show less
    References

    [1] Pan Weidong, Zhang Jiawei, Dai Jingmin, et al. Tunable diode laser absorption spectroscopy for simultaneous measurement of ethylene and methane near 1.626 μm [J]. Journal of Infrared and Millimeter Waves, 2013, 32(6):487-490. (in Chinese)

    [2] Yao Lu, Liu Wenqing, Liu Jianguo, et al. Research on open-path detection for atmospheric trace gas CO based on TDLAS[J]. Chinese Journal of Lasers, 2015, 42(2): 305-312. (in Chinese)

    [3] Xia H, Wu B, Zhang Z R, et al. Stability study on high sensitive CO monitoring in near-infrared [J]. Acta Physica Sinca, 2013, 62: 214208.

    [4] Zheng Longjiang, Huang Xinyan, Bi Genfeng. Study of optical fiber carbon monoxide gas sensor with DFB LD[C]//Proceedings of SPIE, 2008, 6625: 66251Y-7.

    [5] Sun K, Chao X, Sur R, et al. Wavelength modulation diode laser absorption spectroscopy for high-pressure gas sensing [J]. Applied Physics B, 2012, 110(4):497-508.

    [6] Goldenstein C S, Strand C L, Schultz I A, et al. Fitting of calibration free scanned wavelength modulation spectroscopy spectra for determination of gas properties and absorption lineshapes[J]. Applied Optics, 2014, 53(3): 356-367.

    [8] Scherer J J, Paul J B, Jost H J, et al. Mid-IR difference frequency laser-based sensors for ambient CH4, CO, and N2O monitoring[J]. Applied Physics B, 2013, 110: 271-277.

    [9] Nikkari J J, Diiorio L, Thomson M J. In situ combustion measurements of CO, H2O, and temperature with a 1.58mm diode laser and two-tone frequency modulation[J]. Applied Optics, 2002, 41(3): 446-452.

    [10] Zhang Lin, Zhang Liming, Li Yan, et al. Application and improvement of partial-least-squares in fourier transform infrared spectroscopy[J]. Spectroscopy and Spectral Analysis, 2005, 25(10): 1610-1613. (in Chinese)

    [11] Ye W L, Zheng C T, Yu X, et al. Design and performances of a mid-infrared CH4 detection device with novel three-channel-based LS-FTF self-adaptive denoising structure[J]. Sensors and Actuators B, 2011, 155(1): 37-45.

    [12] Vanderover J, Wang W, Oehlschlaeger M A. A carbon monoxide and thermometry sensor based on mid-IR quantum-cascade laser wavelength-modulation absorption spectroscopy[J]. Applied Physics B, 2011, 103(4): 959-966.

    [13] Melas F D, Pustogov V V, Croitoru N, et al. Development and optimization of a mid-infrared hollow waveguide gas sensor combined with a supported capillary membrane sampler[J]. Appl Spectrosc, 2003, 57(6): 600-606.

    [14] Zheng Chuantao, Ye Weilin, Li Guolin, et al. Performance enhancement of a mid-infrared CH4 detection sensor by optimizing an asymmetric ellipsoid gas-cell and reducing voltage-fluctuation: Theory, design and experiment[J]. Sensors and Actuators B: Chemical, 2011, 160(1): 389-398.

    [15] Li Guolin, Sui Yue, Dong Ming, et al. A carbon monoxide detection device based on mid-infrared absorption spectroscopy at 4.6 μm[J]. Applied Physics B, 2015, 119(2): 287-296.

    [16] Li Guojin, Yan Zihui, Song Nan, et al. Design and performances of a carbon monoxide sensor using mid infrared absorption spectroscopy technique at 4.6 μm[J]. Spectroscopy Letters, 2015, 48(6): 454-461.

    Li Guolin, Ji Wenhai, Wang Yiding. Design and experiment of mid-infrared differential CO detector[J]. Infrared and Laser Engineering, 2018, 47(4): 404005
    Download Citation