Humidity sensor based on BiOBr synthesized under ambient condition

Chaofan Cao; Guixian Xiao; Yao Lu

doi:10.1088/1674-4926/43/12/124101

[1] S Rolfe. The importance of respiratory rate monitoring. Brit J Nurs, 28, 504(2019).

[2] A H Jonkman, H J De Vries, L M A Heunks. Physiology of the respiratory drive in ICU patients: implications for diagnosis and treatment. Crit Care, 24, 1(2020).

[3] L Bigatello, A Pesenti. Respiratory physiology for the anesthesiologist. Anesthesiology, 130, 1064(2019).

[4] McCafferty J. Respiratory heat and moisture loss in health, asthma and chronic obstructive pulmonary disease (COPD). University of Edinburgh, 2006

[5] K P Sylvester, L Youngs, M A Rutter et al. Early respiratory diagnosis: benefits of enhanced lung function assessment. BMJ Open Respir Res, 8, e001012(2021).

[6] T A Baldo, L F de Lima, L F Mendes et al. Wearable and biodegradable sensors for clinical and environmental applications. ACS Appl Electron Mater, 3, 68(2020).

[7] Y Lu, K Xu, L Zhang et al. Multimodal plant healthcare flexible sensor system. ACS Nano, 14, 10966(2020).

[8] B Li, G Xiao, F Liu et al. A flexible humidity sensor based on silk fabrics for human respiration monitoring. J Mater Chem C, 6, 4549(2018).

[9] B Peng, F Zhao, J Ping et al. Recent Advances in nanomaterial‐enabled wearable sensors: Material synthesis, sensor design, and personal health monitoring. Small, 16, 2002681(2020).

[10] X Leng, Y Wang, F Wang. Alcohols assisted hydrothermal synthesis of defect-rich MoS 2 and their applications in humidity sensing. Adv Mater Interfaces, 6, 1900010(2019).

[11] A G Al-Sehemi, M S Al-Assiri, A Kalam et al. Sensing performance optimization by tuning surface morphology of organic (D-π-A) dye based humidity sensor. Sens Actuators B, 231, 30(2016).

[12] Y Lu, K Xu, M Q Yang et al. Highly stable Pd/HNb 3O 8-based flexible humidity sensor for perdurable wireless wearable applications. Nanoscale Horiz, 6, 260(2021).

[13] Y F Wang, T Sekine, Y Takeda et al. Fully printed PEDOT: PSS-based temperature sensor with high humidity stability for wireless healthcare monitoring. Sci Rep, 10, 1(2020).

[14] Y M Bae, Y H Lee, H S Kim et al. Polyimide-polyurethane/urea block copolymers for highly sensitive humidity sensor with low hysteresis. J Appl Polym Sci, 134, 44973(2017).

[15] H Farahani, R Wagiran, M N Hamidon. Humidity sensors principle, mechanism, and fabrication technologies: a comprehensive review. Sensors, 14, 7881(2014).

[16] H An, T Habib, S Shah et al. Water sorption in MXene/polyelectrolyte multilayers for ultrafast humidity sensing. ACS Appl Nano Mater, 2, 948(2019).

[17] X Leng, D Luo, Z Xu et al. Modified graphene oxide/Nafion composite humidity sensor and its linear response to the relative humidity. Sens Actuators B, 257, 372(2018).

[18] P Zhu, Y Liu, Z Fang et al. Flexible and highly sensitive humidity sensor based on cellulose nanofibers and carbon nanotube composite film. Langmuir, 35, 4834(2019).

[19] J Yang, R Shi, Z Lou et al. Flexible smart noncontact control systems with ultrasensitive humidity sensors. Small, 15, 1902801(2019).

[20] S Wang, Z Chen, A Umar et al. Supramolecularly modified graphene for ultrafast responsive and highly stable humidity sensor. J Phys Chem C, 119, 28640(2015).

[21] J Zhao, N Li, H Yu et al. Highly sensitive MoS 2 humidity sensors array for noncontact sensation. Adv Mater, 29, 1702076(2017).

[22] S Vadivel, M Vanitha, A Muthukrishnaraj et al. Graphene oxide–BiOBr composite material as highly efficient photocatalyst for degradation of methylene blue and rhodamine-B dyes. J Water Proc Eng, 1, 17(2014).

[23] H Yu, H Huang, K Xu et al. Liquid-phase exfoliation into monolayered BiOBr nanosheets for photocatalytic oxidation and reduction. ACS Sustaine Chem Eng, 5, 10499(2017).

[24] Y Peng, J Xu, T Liu et al. Controlled synthesis of one-dimensional BiOBr with exposed (110) facets and enhanced photocatalytic activity. CrystEngComm, 19, 6473(2017).