[1] Xia X[J]. Introduction to 3D printing ceramics and industrialiazation development in China Ceramics, 2017, 9-12.
[2] Wu H, Liu W, He R et al. Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing[J]. Ceramics International, 43, 968-972(2017). http://www.researchgate.net/publication/308958972_Fabrication_of_dense_zirconia-toughened_alumina_ceramics_through_a_stereolithography-based_additive_manufacturing
[3] Ben Y, Zhang L, Wei S et al. Research progress of 3D printed ceramic materials[J]. Materials Review, 30, 109-118(2016).
[4] Zocca A, Colombo P, Gomes C M et al. Additive manufacturing of ceramics: issues, potentialities, and opportunities[J]. Journal of the American Ceramic Society, 98, 1983-2001(2015). http://onlinelibrary.wiley.com/doi/10.1111/jace.13700/full
[5] Sing S L, Yeong W Y, Wiria F E et al. Direct selective laser sintering and melting of ceramics: a review[J]. Rapid Prototyping Journal, 23, 611-623(2017). http://www.researchgate.net/publication/314952249_Direct_selective_laser_sintering_and_melting_of_ceramics_a_review
[6] Yves-Christian H, Jan W, Wilhelm M et al. Net shaped high performance oxide ceramic parts by selective laser melting[J]. Physics Procedia, 5, 587-594(2010). http://www.sciencedirect.com/science/article/pii/S1875389210005122
[7] Yen H C. Experimental studying on development of slurry-layer casting system for additive manufacturing of ceramics[J]. The International Journal of Advanced Manufacturing Technology, 77, 915-925(2014). http://link.springer.com/article/10.1007/s00170-014-6534-8
[8] Mumtaz K A, Hopkinson N. Laser melting functionally graded composition of Waspaloy® and Zirconia powders[J]. Journal of Materials Science, 42, 7647-7656(2007).
[9] Liu S, Ye F, Liu L et al. Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing[J]. Materials & Design, 66, 331-335(2015). http://www.sciencedirect.com/science/article/pii/S026130691400867X
[10] Shishkovsky I, Yadroitsev I, Bertrand P et al. Alumina-zirconium ceramics synthesis by selective laser sintering/melting[J]. Applied Surface Science, 254, 966-970(2007). http://www.sciencedirect.com/science/article/pii/S0169433207012718
[11] Spierings A B, Herres N, Levy G. Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts[J]. Rapid Prototyping Journal, 17, 195-202(2011).
[12] Sordelet D J, Akinc M. Sintering of monosized, spherical yttria powders[J]. Journal of the American Ceramic Society, 71, 1148-1153(1988). http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1988.tb05807.x/pdf
[13] Wilkes J, Hagedorn Y C, Meiners W et al. Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting[J]. Rapid Prototyping Journal, 19, 51-57(2013).
[14] Naglieri V, Gutknecht D, Garnier V et al. Optimized slurries for spray drying: different approaches to obtain homogeneous and deformable alumina-zirconia granules[J]. Materials, 6, 5382-5397(2013).
[15] Garcia E, Mesquita-Guimarães J, Miranzo P et al. Mullite and mullite/ZrO2-7wt.%Y2O3 powders for thermal spraying of environmental barrier coatings[J]. Journal of Thermal Spray Technology, 19, 286-293(2009).
[16] Regenfuss P, Streek A, Hartwig L et al. Principles of laser micro sintering[J]. Rapid Prototyping Journal, 13, 204-212(2007). http://www.emeraldinsight.com/doi/full/10.1108/13552540710776151
[17] Tolochko N K, Laoui T, Khlopkov Y V et al. Absorptance of powder materials suitable for laser sintering[J]. Rapid Prototyping Journal, 6, 155-161(2000). http://www.emeraldinsight.com/doi/full/10.1108/13552540010337029
[18] Fischer P, Karapatis N, Romano V et al. A model for the interaction of near-infrared laser pulses with metal powders in selective laser sintering[J]. Applied Physics A: Materials Science & Processing, 74, 467-474(2002). http://link.springer.com/article/10.1007/s003390101139
[20] Exner H, Regenfuss P, Hartwig L et al. Selective laser micro sintering with a novel process[C]. SPIE, 5063, 145-151(2003).
[21] Mumtaz K A, Erasenthiran P, Hopkinson N. High density selective laser melting of Waspaloy®[J]. Journal of Materials Processing Technology, 195, 77-87(2008). http://www.sciencedirect.com/science/article/pii/S0924013607004712
[22] Zhang K, Liu T T, Liao W H et al. Experiment on selective laser melting forming of Al2O3 ceramics[J]. Chinese Journal of Lasers, 43, 1002007(2016).
[23] Deckard C R. Method. -09-05[P]. apparatus for producing parts by selective sintering: US4863538.(1989).
[24] Friedel T, Travitzky N, Niebling F et al. Fabrication of polymer derived ceramic parts by selective laser curing[J]. Journal of the European Ceramic Society, 25, 193-197(2005). http://www.sciencedirect.com/science/article/pii/S0955221904003292
[25] Kolan K C, Leu M C, Hilmas G E et al. Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering[J]. Biofabrication, 3, 025004(2011). http://europepmc.org/abstract/MED/21636879
[26] Liu F H, Shen Y K, Lee J L. Selective laser sintering of a hydroxyapatite-silica scaffold on cultured MG63 osteoblasts in vitro[J]. International Journal of Precision Engineering and Manufacturing, 13, 439-444(2012).
[27] Guan T H, Gao B, Lü X W et al. Effect of technologic parameters on phases of bioceramic coating prepared by laser rapid forming[J]. Chinese Journal of Lasers, 36, 2717-2721(2009).
[28] Simpson R L, Wiria F E, Amis A A et al. Development of a 95/5 poly(L-lactide-co-glycolide)/hydroxylapatite and beta-tricalcium phosphate scaffold as bone replacement material via selective laser sintering[J]. Journal of Biomedical Materials Research B, 84, 17-25(2008). http://onlinelibrary.wiley.com/doi/10.1002/jbm.b.30839/citedby
[29] Tan K H, Chua C K, Leong K F et al. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends[J]. Biomaterials, 24, 3115-3123(2003).
[30] Liu K, Sun H J, Shi Y S et al. Research on selective laser sintering of Kaolin-epoxy resin ceramic powders combined with cold isostatic pressing and sintering[J]. Ceramics International, 42, 10711-10718(2106). http://www.sciencedirect.com/science/article/pii/S0272884216303388
[31] Li L, Gao Y, Wang C H et al. Research development of 3D printing ceramics parts[J]. Bulletin of the Chinese Ceramic Society, 35, 2892-2897(2016).
[32] Griffith M L, Halloran J W. Freeform fabrication of ceramics via stereolithography[J]. Journal of the American Ceramic Society, 79, 2601-2608(1996). http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1996.tb09022.x/pdf
[33] Zhou W Z, Li D C, Wang H. A novel aqueous ceramic suspension for ceramic stereolithography[J]. Rapid Prototyping Journal, 16, 29-35(2010). http://www.emeraldinsight.com/doi/full/10.1108/13552541011011686
[34] Kirihara S. Creation of functional ceramics structures by using stereolithographic 3D printing[J]. Transactions of JWRI, 43, 5-10(2014). http://ci.nii.ac.jp/naid/120005496817
[35] Colombo P, Mera G, Riedel R et al. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics[J]. Journal of the American Ceramic Society, 93, 1805-1837(2010). http://onlinelibrary.wiley.com/doi/10.1002/9783527631940.ch57/pdf
[36] Chartier T, Delhomme E, Baumard J F et al. Injection moulding of hollow silicon nitride parts using fusible alloy cores[J]. Ceramics International, 27, 821-827(2001).
[37] Wroblewska G H. Structural ceramics with complex shape——forming methods[C]. 25th Annual Conference on Composites, Advanced Ceramics, Materials and Structures, 22, 43-50(2001).
[38] Eckel Z C, Zhou C Y, Martin J H et al. Additive manufacturing of polymer-derived ceramics[J]. Science, 351, 58-62(2016). http://www.ncbi.nlm.nih.gov/pubmed/26721993
[39] Sachs E M, Somerville J S, Cima M J et al. -08-23(1994).
[40] Sachs E M, Cima M J, Caradonna M A et al. -07-22[P]. the formation of fine powder beds thereby: US6596224.(2003).
[41] Tang H H, Yen H C. Slurry-based additive manufacturing of ceramic parts by selective laser burn-out[J]. Journal of the European Ceramic Society, 35, 981-987(2015). http://www.sciencedirect.com/science/article/pii/S0955221914005548
[42] Mühler T, Gomes C M, Heinrich J et al. Slurry-based additive manufacturing of ceramics[J]. International Journal of Applied Ceramic Technology, 12, 18-25(2015). http://onlinelibrary.wiley.com/doi/10.1111/ijac.12113/pdf
[43] Krause T, Engler S, Günster J et al. -12-07[P]. a device for producing ceramic molds: US6827988.(2004).
[44] Windsheimer H, Travitzky N, Hofenauer A et al. Laminated object manufacturing of preceramic-paper-derived Si-SiC composites[J]. Advanced Materials, 19, 4515-4519(2007). http://onlinelibrary.wiley.com/doi/10.1002/adma.200700789/full
[45] Griffin E A, Mumm D R, Marshall D B. Rapid prototyping of functional ceramic composites[J]. American Ceramic Society Buttetin, 75, 65-68(1996). http://www.researchgate.net/publication/255039538_Rapid_prototyping_of_functional_ceramic_composites
[46] Zhang Y, He X, Du S et al. Al2O3 ceramics preparation by LOM (laminated object manufacturing)[J]. The International Journal of Advanced Manufacturing Technology, 17, 531-534(2001). http://link.springer.com/article/10.1007/s001700170154
[47] Klosterman D, Chartoff R, Graves G et al. Interfacial characteristics of composites fabricated by laminated object manufacturing[J]. Applied Science and Manufacturing, 29, 1165-1174(1998). http://www.sciencedirect.com/science/article/pii/S1359835X98000888
