• Laser & Optoelectronics Progress
  • Vol. 52, Issue 4, 41403 (2015)
Liu Dongyu*, Li Dong, Li Kaibin, and Chen Qianqian
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/lop52.041403 Cite this Article Set citation alerts
    Liu Dongyu, Li Dong, Li Kaibin, Chen Qianqian. Microstructure Analysis of Fiber Laser Welding between E36 and 304 Stainless Steel[J]. Laser & Optoelectronics Progress, 2015, 52(4): 41403 Copy Citation Text show less
    References

    [1] Feng Jicai, Wang Ting, Zhang Binggang, et al.. Analysis of present condition of vacuum electron beam welding in dissimilar materials [J]. Transactions of the China Welding Institution, 2009, 30(10): 108-111.

    [2] Wang Ke, Zheng Zhentai, Xue Haitao, et al.. Microstructure of 254SMO/Q235B dissimilar steel welded joint [J]. China Welding Institution, 2013, 34(2): 105-108.

    [3] Ou Ping, Sun Jian, Zhang Maolong, et al.. Microstructure of SA508/316L dissimilar steel welding joints [J]. Transactions of Materials and Heat Treatment, 2013, 34(10): 132-138.

    [4] Song Zhihua, Wu Aiping, Yao Wei, et al.. Influence of laser offset on microstructure and mechanical properties of Ti/Al dissimilar joint by laser welding [J]. Transactions of the China Welding Institution, 2013, 34(1): 105-108.

    [5] Zuo Congjin, Li Jinwei, Yu Wei, et al.. Tensile performance of Ti55 and Ti60 jiont welded by electron beam welding [J]. Transactions of the China Welding Institution, 2011, 32(4): 103-106.

    [6] Zhang Qi, Wang Jiaqing, Chen Guohong, et al.. Microstructures and mechanical properties of T92/Super304H dissimilar steel weld joints [J]. The Chinese Journal of Nonferrous Metals, 2013, 23(2): 396-402.

    [7] Chen Chen. Research on Welding Technology and Microstructure and Properties of Welded Joint of Stainless Steel/Carbon Steel Composite Plate [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2012: 27.

    [8] W Kurz, D J Fisher. Fundamentals of Solidification [M]. Beijing: Higher Education Press, 2010: 120-121.

    [9] Wang Baiping, Zhao Yong, Huang Jian. Investigation on microstructure of thick plate stainless steel joint welded by multi-pass laser welding with filler wire [J]. Chinese J Lasers, 2013, 40(2): 0203008.

    [10] Chen Gang, Yang Quanyi, Zhou Mingzhe, et al.. Study of the microstructure and properties of M42/X32 dissimilar metal CO2 laser welding joints [J]. Journal of Hunan University (Natural Scinences), 2013, 40(11): 89-94.

    [11] Dong Danyang, Wang Guanjun, Ma Min, et al.. Study on microstructure and properties of laser welding dual phase steel joints for an auto-body [J]. Chinese J Lasers, 2012, 39(9): 0903002.

    [12] Jia Jin, Yang Shanglei, Ni weiyuan, et al.. Study on microstructure and properties of laser welding joints of marine high strength steel E36 [J]. Chinese J Lasers, 2014, 41(2): 0203002.

    CLP Journals

    [1] Li Qian, Sun Guifang, Lu Yi, Zhang Yongkang. Experimental Research on Fiber Laser Underwater Cutting of 1 mm Thick 304 Stainless Steel[J]. Chinese Journal of Lasers, 2016, 43(6): 602001

    Liu Dongyu, Li Dong, Li Kaibin, Chen Qianqian. Microstructure Analysis of Fiber Laser Welding between E36 and 304 Stainless Steel[J]. Laser & Optoelectronics Progress, 2015, 52(4): 41403
    Download Citation