• Optics and Precision Engineering
  • Vol. 22, Issue 8, 2142 (2014)
GONG Xue-peng*, LU Qi-peng, and PENG Zhong-qi
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/ope.20142208.2142 Cite this Article
    GONG Xue-peng, LU Qi-peng, PENG Zhong-qi. Design and testing of deflecting mirror system of X-ray interference lithography beamline[J]. Optics and Precision Engineering, 2014, 22(8): 2142 Copy Citation Text show less
    References

    [1] SCHATTENBURG M L,AUCOIN R J,FLEMING R C,et al.. Fabrication of high-energy X-ray transmission gratings for the Advanced X-ray Astrophysics Facility (AXAF)[J]. SPIE, 1994, 2280: 181-190.

    [2] GEORGE R B. Electron-Beam Technology in Microelectronics Fabrication[M].Newyork:Academic Press,1980:11-16.

    [3] HIRSCHER S,KMMEL M,KIRCH O, et al.. Ion projection lithography below 70 nm: tool performance and resist process [J]. Microelectronic Engineering. 2002, 61-62: 301-307.

    [4] RESNICK D J,DAUKSHER W J. Imprint lithography: lab curiosity or the real NGL[J]. SPIE Microlithography Conference, 2003, 12-23.

    [5] HEYDERMAN L J, SOLAK H H,DAVID C, et al.. Arrays of nanoscale magnetic dots: Fabrication by x-ray interference lithography and characterization [J]. Appl.Phys.Lett., 2004, 85: 4989-4991.

    [6] YASIN E, HARUN H S, CHRISTIAN D, et al.. Bilayer Al wire-grids as broadband and high performance polarizers[J]. Optics Express, 2006,14(6): 2323-2334.

    [7] SOLAK H,DAVID C,GOBRECHT J, et al.. Fabrication of high-resolution zone plates with wideband extreme-ultraviolet holography[J]. Appl. Phys. Lett., 2004, 85(14): 2700-2702.

    [8] HARUN H S, YASIN E, PHILIPP K. Photon-beam lithography reaches 12.5 nm half-pitch resolution [J]. J. Vac. Sci. Technol. B. 2007,25: 91-95.

    [9] TEIXEIRA A I,ABRAMS G A,MURPHY C J, et al.. Cell behavior on lithographically defined nanostructured substrates[J]. J. Vac. Sci. Tech. B, 2003, 21(2): 683-68.

    [10] GAO S S,LV Q P,PENG ZH Q,et al.. Principle and finite element analysis on UHV four-knife precision slits [J].Opt. Precision Eng.,2013,21(7):1741-1747.(in Chinese)

    [11] ZHAO L,GONG Y,ZHAO Y.Flexure-based X-Y micro-motion mechanism used in ligthography lens[J].Opt. Precision. Eng.,2013,21(6):1425-1433.(in Chinese)

    [12] LIU SH T,HU R,ZHOU P,et al..Topologic optimization for configuration design of web-skin-type ground structure based large-aperture space mirror[J].Opt. Precision Eng.,2013,21(7):1803-1810.(in Chinese)

    [13] GONG X P, LU Q P, PENG Z Q. Structure design and accuracy testing of monochromator in a soft X-ray spectromicroscopic beamline [J]. Acta Optica Sinica, 2013,33(2):0234001.(in Chinese)

    [14] WU K, XUE S, LU Q P, et al.. Simulation analysis and measurement of rotation angle repeatability for grating sine mechanism of SX-700 monochromator [J]. Opt. Precision Eng., 2010, 18(1): 45-51.(in Chinese)

    [15] LU Q P, MA L, PENG ZH Q. Rotation-angle-accuracy measurement of scanning mechanism in variable included angle plane grating monochromator [J]. Opt. Precision Eng., 2010, 18(7): 1548-1553.(in Chinese)

    GONG Xue-peng, LU Qi-peng, PENG Zhong-qi. Design and testing of deflecting mirror system of X-ray interference lithography beamline[J]. Optics and Precision Engineering, 2014, 22(8): 2142
    Download Citation