• Laser & Optoelectronics Progress
  • Vol. 59, Issue 11, 1130002 (2022)
Yunpeng Wu1 and Jun Wang1、2、*
Author Affiliations
  • 1School of Electronic and Information Engineering, Suzhou University of Science and Technology, Suzhou 215009, Jiangsu , China
  • 2Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, Jilin , China
  • show less
    DOI: 10.3788/LOP202259.1130002 Cite this Article Set citation alerts
    Yunpeng Wu, Jun Wang. Structural Optimization Design and Analysis of M-Type Czerny-Turner Spectrometer[J]. Laser & Optoelectronics Progress, 2022, 59(11): 1130002 Copy Citation Text show less

    Abstract

    Aiming at the problem of secondary diffraction in aberration correction of an M-type Czerny-Turner spectrometer, we propose the anti-secondary diffraction condition for this optical structure under the coma-free condition. The main factors of secondary diffraction are analyzed and deduced theoretically. Combining the anti-secondary diffraction condition with the constraint coma-free condition, we built an M-type coma-free Czerny-Turner spectrometer. In order to verify the correctness of the theoretical analysis, the Zemax OpticStudio simulation software is used for a comparative experiment. The simulation results show that there is no secondary diffraction in the M-type optical path structure meeting the constraints, but there is secondary diffraction in the M-type optical path structure that does not meet the constraints, which is consistent with the theoretical analysis result. Under the condition that the incident slit width is 25 μm and the grating engraving line density is 600 line/mm, the spectral resolution of the optical system optimized by the software is better than 1 nm in the range of 200?500 nm.
    Yunpeng Wu, Jun Wang. Structural Optimization Design and Analysis of M-Type Czerny-Turner Spectrometer[J]. Laser & Optoelectronics Progress, 2022, 59(11): 1130002
    Download Citation