Single Side Resistance Spot Welding Process and Performance of Stainless Steel and Glass Fiber Reinforced Plastics Based on Laser Texturing

Caiwang Tan; Shijia Wang; Jianhui Su; Xiaohui Han; Bo Chen; Xiaoguo Song

doi:10.3788/CJL231128

[1] Liu H B, Liu J, Ding Y Z et al. A three-dimensional elastic-plastic damage model for predicting the impact behaviour of fibre-reinforced polymer-matrix composites[J]. Composites Part B: Engineering, 201, 108389(2020).

[2] Joesbury A M, Colegrove P A, Van Rymenant P et al. Weld-bonded stainless steel to carbon fibre-reinforced plastic joints[J]. Journal of Materials Processing Technology, 251, 241-250(2018).

[3] Zhang S P, Cao Y, Yang W F et al. Effects of surface silane modification and laser machining microbarb structure on performance of aluminum alloy-CFRP adhesive joint[J]. Chinese Journal of Lasers, 50, 1202203(2023).

[4] Jing R M, Xu J J, Xiao R S et al. Simulation study of laser joining for carbon fiber reinforced plastics and titanium alloys[J]. Chinese Journal of Lasers, 50, 0802101(2023).

[5] Liu Y F, Zhou B S, Zhang T et al. Study on laser bonding of titanium alloy and CFRP based on surface microtexture[J]. Chinese Journal of Lasers, 49, 1803001(2022).

[6] Cao Y J, Cao Z Q, Zuo Y J et al. Numerical and experimental investigation of fitting tolerance effects on damage and failure of CFRP/Ti double-lap single-bolt joints[J]. Aerospace Science and Technology, 78, 461-470(2018).

[7] Wang Z M, Bi X Y, Liu B S et al. Adhesion enhancement of PEEK/6161-T6 FLJ joints via laser surface modification[J]. Composites Part B: Engineering, 216, 108797(2021).

[8] Hu Y S, Zhang J H, Wang L et al. A simple and effective resin pre-coating treatment on grinded, acid pickled and anodised substrates for stronger adhesive bonding between Ti-6Al-4V titanium alloy and CFRP[J]. Surface and Coatings Technology, 432, 128072(2022).

[9] Huang Y X, Meng X C, Xie Y M et al. Friction stir welding/processing of polymers and polymer matrix composites[J]. Composites Part A: Applied Science and Manufacturing, 105, 235-257(2018).

[10] Lionetto F, Mele C, Leo P et al. Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization[J]. Composites Part B: Engineering, 144, 134-142(2018).

[11] Lionetto F, Balle F, Maffezzoli A. Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites[J]. Journal of Materials Processing Technology, 247, 289-295(2017).

[12] Lambiase F, Paoletti A. Friction assisted joining of titanium and polyetheretherketone (PEEK) sheets[J]. Thin-Walled Structures, 130, 254-261(2018).

[13] Lambiase F, Paoletti A. Mechanical behavior of AA5053/polyetheretherketone (PEEK) made by Friction Assisted Joining[J]. Composite Structures, 189, 70-78(2018).

[14] Wang Y Q, Rao Z H, Liao S M et al. Ultrasonic welding of fiber reinforced thermoplastic composites: current understanding and challenges[J]. Composites Part A: Applied Science and Manufacturing, 149, 106578(2021).

[15] Tan C W, Su J H, Feng Z W et al. Research status and development on laser joining of metal to plastic[J]. Journal of Mechanical Engineering, 56, 85-94(2020).

[16] Han X H, Zhang Z Y, Ma G L et al. Effects of heat source angle on weld formation and porosity defects of laser-MIG hybrid welding of 6A01 aluminum alloy[J]. Chinese Journal of Lasers, 49, 0202020(2022).

[17] Kim K Y, Ahmed F. Semantic weldability prediction with RSW quality dataset and knowledge construction[J]. Advanced Engineering Informatics, 38, 41-53(2018).

[18] Nagatsuka K, Xiao B L, Wu L H et al. Resistance spot welding of metal/carbon-fibre-reinforced plastics and applying silane coupling treatment[J]. Science and Technology of Welding and Joining, 23, 181-186(2018).

[19] Szallies K, Bielenin M, Schricker K et al. Single-side resistance spot joining of polymer-metal hybrid structures[J]. Welding in the World, 63, 1145-1152(2019).

[20] Ren S D, Ma Y W, Ma N S et al. 3-D modelling of the coaxial one-side resistance spot welding of AL5052/CFRP dissimilar material[J]. Journal of Manufacturing Processes, 68, 940-950(2021).

[21] Ren S D, Ma Y W, Saeki S et al. Fracture mechanism and strength evaluation of Al5052/CFRP joint produced by coaxial one-side resistance spot welding[J]. Composite Structures, 252, 112766(2020).

[22] Ren S D, Ma Y W, Saeki S et al. Numerical analysis on coaxial one-side resistance spot welding of Al5052 and CFRP dissimilar materials[J]. Materials & Design, 188, 108442(2020).

[23] Kwon D J, Kim J H, Kim Y J et al. Comparison of interfacial adhesion of hybrid materials of aluminum/carbon fiber reinforced epoxy composites with different surface roughness[J]. Composites Part B: Engineering, 170, 11-18(2019).

[24] Rodríguez-Vidal E, Sanz C, Lambarri J et al. Experimental investigation into metal micro-patterning by laser on polymer-metal hybrid joining[J]. Optics & Laser Technology, 104, 73-82(2018).

[25] Zhang Z, Shan J G, Tan X H et al. Improvement of the laser joining of CFRP and aluminum via laser pre-treatment[J]. The International Journal of Advanced Manufacturing Technology, 90, 3465-3472(2017).

[26] Zhang Z, Tan X H, Zhang J et al. Suppression of shrinkage porosity in laser-joining of CFRP and steel using a laser surface modification process “Surfi-Sculpt®[J]. International Journal of Adhesion and Adhesives, 85, 184-192(2018).