• Photonic Sensors
  • Vol. 4, Issue 3, 242 (2014)
Caibin YU1, Xiaoxiao CHEN2, Yuan GONG1、*, Yu WU1, Yunjiang RAO1, and and Gangding PENG3
Author Affiliations
  • 1Key Laboratory of Optical Fiber Sensing and Communications (Ministry of Education of China), University of Electronic Science and Technology of China, Chengdu, 611731, China
  • 2National Institute of Measurement and Testing Technology, Chengdu, 610021, China
  • 3School of Electrical Engineering and Telecommunications, University of New South Wales, Sydney, NSW 2052, Australia
  • show less
    DOI: Cite this Article
    Caibin YU, Xiaoxiao CHEN, Yuan GONG, Yu WU, Yunjiang RAO, and Gangding PENG. Simultaneous Force and Temperature Measurement Using Optical Microfiber Asymmetrical Interferometer[J]. Photonic Sensors, 2014, 4(3): 242 Copy Citation Text show less
    References

    [1] L. M. Tong, R. R. Gattass, J. B. Ashcomv, S. L. He, J. Y. Lou, M. Y. Shen, et al., “Subwavelength-diameter silica wires for low-loss optical wave guiding,” Nature, 2003, 426(6968): 816-819.

    [2] G. Brambilla, “Optical fiber nanowires and microwires: a review,” Journal of Optics, 2010, 12(4): 043001.

    [3] J. Scheuer and M. Sumetsky, “Trap-door optical buffering using a flat-top coupled microring filter: the superluminal cavity approach,” Optics Letters, 2013, 38(18): 3534-3537.

    [4] L. Zhang, J. Y. Lou, and L. M. Tong, “Polymer single-nanowire optical sensors,” Photonic Sensors, 2011, 1(1): 31-42.

    [5] R. Ismaeel, T. Lee, M. Ding, M. Belal, and G. Brambilla, “Optical microfiber passive components,” Laser and Photonics Reviews, 2013, 7(3): 350-384.

    [6] F. X. Gu, L. Zhang, X. F. Yin, and L. M. Tong, “Polymer single-nanowire optical sensors,” Nano Letters, 2008, 8(9): 2757-2761.

    [7] Y. Wu, Y. J. Rao, Y. Chen, and Y. Gong, “Miniature fiber-optic temperature sensors based on silica/polymer microfiber knot resonators,” Optics Express, 2009, 17(20): 18142-18147.

    [8] X. S. Jiang, L. M. Tong, G. Vienne, X. Guo, T. Albert, Q.Yang, and D. R. Yang, “Demonstration of optical microfiber knot resonators,” Applied Physics Letters, 2006, 88(22): 223501.

    [9] M. Sumetsky, Y. Dulashko, J. M. Fini, and A. Hale, “Optical microfiber loop resonator,” Applied Physics Letters, 2005, 86: 161108.

    [10] J. L. Kou, J. Feng, Q. J. Wang, F. Xu, and Y. Q. Lu, “Microfiber-probe-based ultrasmall interferometric sensor,” Optics Letters, 2010, 35(13): 2308.

    [11] M. Sumetsky, “Fabrication and study of bent and coiled free silica nanowires: self-coupling microloop optical interferometer,” Optics Express, 2004, 12(15): 3521-3531.

    [12] F. Xu, P. Horak, and G. Brambilla, “Optical microfiber coil resonator refractometric sensor,” Optics Express, 2007, 15(12): 7888-7893.

    [13] F. Xu and G. Brambilla, “Demonstration of a refractometric sensor based on optical microfiber coil resonator,” Applied Physics Letters, 2008, 92(10): 101126.

    [14] W. Luo, J. L. Kou, Y. Chen, F. Xu, and Y. Q. Lu, “Ultra-highly sensitive surface-corrugated microfiber Bragg grating force sensor,” Applied Physics Letters, 2012, 101(13): 133502.

    [15] Y. Liu, C. Meng, A. P. Zhang, Y. Xiao, H. Yu, and L. M. Tong, “Compact microfiber Bragg gratings with high-index contrast,” Optics Letters, 2011, 36(16), 3115-3117.

    [16] Y. Ran, Y. N. Tan, L. P. Sun, S. Gao, J. Li, L. Jin, et al., “193 nm excimer laser inscribed Bragg gratings in microfibers for refractive index sensing,” Optics Express, 2011, 19(19): 18577-18583.

    [17] S. Gao, L. Jin, Y. Ran, L. P. Sun, J. Li, and B. O. Guan, “Temperature compensated microfiber Bragg gratings,” Optics Express, 2012, 20(16): 18281-18286.

    [18] X. Fang, C. R. Liao, and D. N. Wang, “Femtosecond laser fabricated fiber Bragg grating in microfiber for refractive index sensing,” Optics Letters, 2010, 35(7): 1007-1009.

    [19] J. Li, X. Shen, L. P. Sun, and B. O. Guan, “Characteristics of microfiber Fabry-Perot resonators fabricated by UV exposure,” Optics Express, 2013, 21(10): 12111-12121.

    [20] J. Zhang, Q. Sun, R. Liang, J. Wo, D. Liu, and P. Shum, “Microfiber Fabry-Perot interferometer fabricated by taper-drawing technique and its application as a radio frequency interrogated refractive index sensor,” Optics Letters, 2012, 37(14): 2925-2927.

    [21] Y. Gong, C. B. Yu, T. T. Wang, X. P. Liu, Y. Wu, Y. J. Rao, et al., “Highly sensitive force sensor based on optical microfiber asymmetrical Fabry-Perot interferometer,” Optics Express, 2014, 22(3): 3578-3584.

    [22] T. Wei, Y. Han, Y. Li, H. Tsai, and H. Xiao, “Temperature-insensitive miniaturized fiber inline Fabry-Perot interferometer for highly sensitive refractive index measurement,” Optics Express, 2008, 16(8): 5764.

    [23] Y. O. Barmenkov, D. Zalvidea, S. Torres-Peiro, J. L. Cruz, and M. V. Andres, “Effective length of short Fabry-Perot cavity formed by uniform fiber Bragg gratings,” Optics Express, 2006, 14(14): 6394-6399.

    [24] Y. J. Rao, “Recent progress in fiber-optic extrinsic Fabry-Perot interferometric sensors,” Optical Fiber Technology, 2006, 12(3): 227-237.

    [25] Y. Fujii, “Method of generating and measuring static small force using down-slope component of gravity,” Review of Scientific Instruments, 2007, 78(6): 066104.

    [26] F. Xie, X. F. Chen, L. Zhang, and M. Song, “Multi-parameter and multi-functional fiber grating sensing technology,” Optics Laser Engineering, 2006, 44: 1088.

    Caibin YU, Xiaoxiao CHEN, Yuan GONG, Yu WU, Yunjiang RAO, and Gangding PENG. Simultaneous Force and Temperature Measurement Using Optical Microfiber Asymmetrical Interferometer[J]. Photonic Sensors, 2014, 4(3): 242
    Download Citation