[1] K IMASATO, S D KANG, G J SNYDER. Exceptional thermoelectric performance in Mg3Sb0.6Bi1.4 for low-grade waste heat recovery. Energy & Environmental Science, 965(2019).
[2] X YANG, X SU, Y YAN et al. Structures and thermoelectric properties of (GeTe)nBi2Te3. Journal of Inorganic Materials, 75(2021).
[3] H GONG, X SU, Y YAN et al. Ultra-fast synthesis of Cu2S thermoelectric materials under pulsed electric field. Journal of Inorganic Materials, 1295(2019).
[4] P REN, C WANG, P ZI et al. Effect of Te and In co-doping on thermoelectric properties of Cu2SnSe3compounds. Journal of Inorganic Materials, 1079(2022).
[5] W SHI, D WANG, Z SHUAI. High-performance organic thermoelectric materials: theoretical insights and computational design. Advanced Electronic Materials, 1079(2019).
[6] L D CHEN, Z XIONG, S Q BAI. Recent progress of thermoelectric nano-composites. Journal of Inorganic Materials, 561(2010).
[7] Y CHEN, X HOU, C MA et al. Review of development status of Bi2Te3-based semiconductor thermoelectric power generation. Advances in Materials Science and Engineering, 1210562(2018).
[8] T KAJIHARA, K MAKINO, Y H LEE et al. Study of thermoelectric generation unit for radiant waste heat. Materials Today: Proceedings, 804(2015).
[9] X TANG, Z LI, W LIU et al. A comprehensive review on Bi2Te3- based thin films: thermoelectrics and beyond. Interdisciplinary Materials, 88(2022).
[10] F KIM, B KWON, Y EOM et al. 3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks. Nature Energy, 301(2018).
[11] Y K ZHU, P WU, J GUO et al. Achieving a fine balance in mechanical properties and thermoelectric performance in commercial Bi2Te3 materials. Ceramics International, 14994(2020).
[12] Y J DAI, H M HU, T S GE et al. Investigation on a mini-CPC hybrid solar thermoelectric generator unit. Renewable Energy, 83(2016).
[13] W H CHAO, S C TSENG, P H YANG et al. Enhanced thermoelectric properties of Bi2Te3 doping Zn4Sb3 by combinatorial approach. Surface and Coatings Technology, 34(2013).
[14] T FANG, X LI, C HU et al. Complex band structures and lattice dynamics of Bi2Te3-based compounds and solid solutions. Advanced Functional Materials, 1900677(2019).
[15] Q SHI, J LI, X ZHAO et al. Comprehensive insight into p-type Bi2Te3-based thermoelectrics near room temperature. ACS Applied Materials & Interfaces, 49425(2022).
[16] Y LI, K CAI, B HUANG et al. Use of molecular dynamics simulations to study the effects of nanopores and vacancies on the mechanical properties of Bi2Te3. Journal of Electronic Materials, 1824(2013).
[17] F REN, P MENCHHOFER, J KIGGANS et al. Development of thermoelectric fibers for miniature thermoelectric devices. Journal of Electronic Materials, 1412(2015).
[18] X TANG, Y YAN, Y XIAO et al. Effect of surface treatment of n-type Bi2Te3-based materials on the properties of thermoelectric units. Journal of Inorganic Materials, 163(2023).
[19] Y ZHENG, X Y TAN, X WAN et al. Thermal stability and mechanical response of Bi2Te3-based materials for thermoelectric applications. ACS Applied Materials & Interfaces, 2078(2019).
[20] X A FAN, J Y YANG, W ZHU et al. Effect of nominal Sb2Te3 content on thermoelectric properties of p-type (Bi2Te3)x(Sb2Te3)1-x alloys by MA-HP. Journal of Physics D: Applied Physics, 5069(2006).
[21] E GÜLER, M GÜLER. Theoretical prediction of the structural, elastic, mechanical and phonon properties of bismuth telluride under pressure. International Journal of Modern Physics B, 1550222(2015).
[22] L D IVANOVA, L I PETROVA, Y V GRANATKINA et al. Thermoelectric materials based on Sb2Te3-Bi2Te3 solid solutions with optimal performance in the range 100-400 K. Inorganic Materials, 933(2007).
[23] H S KIM, N A HEINZ, Z M GIBBS et al. High thermoelectric performance in (Bi0.25Sb0.75)2Te3 due to band convergence and improved by carrier concentration control. Materials Today, 452(2017).
[24] N P STEPANOV, A A KALASHNIKOV, Y V ULASHKEVICH. Plasma screening of the fundamental absorption edge in crystals of Bi2Te3-Sb2Te3 solid solutions with more than 80mol% Sb2Te3. Optics and Spectroscopy, 401(2014).
[25] X A FAN, J Y YANG, R G CHEN et al. Phase transformation and thermoelectric properties of p-type (Bi2Te3)0.25(Sb2Te3)0.75prepared by mechanical alloying and hot pressing. Materials Science and Engineering: A, 190(2006).
[26] I I ALIEV, N A MAMEDOVA, F M SADYGOV et al. Investigation of the chemical interaction in the Sb2Te3-InSe system and the properties of the obtained phases. Russian Journal of Inorganic Chemistry, 1585(2020).
[27] S K FENG, S M LI, H Z FU. Probing the thermoelectric transport properties of n-type Bi2Te3 close to the limit of constitutional undercooling. Chinese Physics B, 117202(2014).
[28] S Y WANG, W J XIE, X F TANG. Effects of preparation techniques on the thermoelectric properties and pressive strengths of n-type B2Te3 based materials. Journal of Inorganic Materials, 609(2010).
[29] S YE, J D HWANG, C M CHEN. Strong anisotropic effects of p-type Bi2Te3 element on the Bi2Te3/Sn interfacial reactions. Metallurgical and Materials Transactions A, 2372(2015).
[30] L D ZHAO, B P ZHANG, J F LI et al. Thermoelectric and mechanical properties of nano-SiC-dispersed Bi2Te3 fabricated by mechanical alloying and spark plasma sintering. Journal of Alloys and Compounds, 259(2008).
[31] H C KIM, T S OH, D B HYUN. Thermoelectric properties of the p-type Bi2Te3-Sb2Te3-Sb2Se3alloys fabricated by mechanical alloying and hot pressing. Journal of Physics and Chemistry of Solids, 743(2000).
[32] J NAVRÁTIL, Z STARÝ, T PLECHÁČEK. Thermoelectric properties of p-type antimony bismuth telluride alloys prepared by cold pressing. Materials Research Bulletin, 1559(1996).
[33] H S SHIN, H P HA, D B HYUN et al. Thermoelectric properties of 25%Bi2Te3-75%Sb2Te3 solid solution prepared by hot-pressing method. Journal of Physics and Chemistry of Solids, 671(1997).
[34] J M SCHULTZ, J P MCHUGH, W A TILLER. Effects of heavy deformation and annealing on the electrical properties of Bi2Te3. Journal of Applied Physics, 2443(1962).
[35] Q ZHANG, B GU, Y WU et al. Evolution of the intrinsic point defects in bismuth telluride-based thermoelectric materials. ACS Applied Materials & Interfaces, 41424(2019).
[36] Q TAO, H WU, W PAN et al. Removing the oxygen-induced donor-like effect for high thermoelectric performance in n-type Bi2Te3-based compounds. ACS Applied Materials & Interfaces, 60216(2021).
[37] F K LOTGERING. Topotactical reactions with ferrimagnetic oxides having hexagonal crystal structures. Journal of Inorganic and Nuclear Chemistry, 113(1959).
[38] M STORDEUR, M STÖLZER, H SOBOTTA et al. Investigation of the valence band structure of thermoelectric (Bi1-xSbx)2Te3 single crystals. Physica Status Solidi B, 165(1988).
[39] R S EROFEEV, V N OVECHKINA. Energy spectrum of solid solutions of Bi2Te3-Sb2Te3system. Inorganic Materials, 1316(1981).
[40] V S GAIDUKOVA, R S EROFEEV, V N OVECHKINA. Characteristics of the energy spectrum of solid solutions in the SbTe-BiTe system. Inorganic Materials, 169(1981).
[41] F HAO, P QIU, Q SONG et al. Roles of Cu in the enhanced thermoelectric properties in Bi0.5Sb1.5Te3. Materials (Basel), 251(2017).
