Heterogeneous Permanent Magnetic Parts by Laser Additive Manufacturing with Four-Wavelength-Laser and Quasi-Six-Degree-of-Freedom

Wang Tao; Zhu Huifang; Zhang Cuiting; Yao Jianquan; Ma Junjie; He Xiaoyang; Lü Xueliang; Niu Shixing

doi:10.3788/LOP55.011414

[1] Huang Q S, Li L Q, Gao B B[J]. Development of metalworking material for foreign metal parts Defense Manufacturing Technology, 2012, 28-31.

[2] Lin X, Huang W D. Laser additive manufacturing of high-performance metal components[J]. Scientia Sinica (Informationis), 45, 1111-1126(2015).

[3] Griffith M L, Keicher D M, Atwood C L et al. Free form fabrication ofmetallic components using laser engineerednet shaping (LENS)[C]. Austin: Solid Freeform Fabrication Symposium(1996).

[4] Griffith M L, Schliengera ME, Harwella L D et al. Understanding thermalbehavior in the LENS process[J]. Materials & Design, 20, 107-113(1999). http://www.sciencedirect.com/science/article/pii/S0261306999000163

[5] Gaumann M, Henry S, Cleton F et al. Epitaxial laser metal forming: Analysis of microstructure formation[J]. Materials Science and Engineering: A, 271, 232-241(1999). http://www.sciencedirect.com/science/article/pii/S0921509399002026

[6] Ning G Q, Zhong M L, Yang L et al. Research about close-loop control system during laser direct manufacturing metallic components[J]. Applied Laser, 22, 172-176(2002).

[7] Huang W D, Li Y M, Feng L P et al. Laser solid forming of metal powdermaterials[J]. Journal of Materials Engineering, 3, 40-43(2002).

[8] Ge J B, Zhang A F, Li D C et al. Process research on DZ125L super alloy parts by laser metal direct forming[J]. Chinese Journal of Lasers, 38, 0703004(2011).

[9] Zhang A F, Li D C, Liang S D et al[J]. Research progress of high-performance metal parts laser gain manufacturing technology Aeronautical Manufacturing Technology, 2016, 16-22.

[10] Choi S, Bieler T R, Lucas J P et al. Characterization of the growth of intermetallic interfacial layers of Sn-Ag and Sn-Pb eutectic solders and their composite solders on Cu substrate during isothermal long-term aging[J]. Journal of Electronic Materials, 28, 1209-1215(1999). http://dl.acm.org/citation.cfm?id=339873

[11] Kestenbaum A. -11-12[P]. Serafino A J. Electrical conductor deposition method: US5064685A.(1991).

[12] Amey D I, Horowitz S J. Materials performance at frequencies up to 20 GHz[C]. Tokyo: International Electronic Manufacturing Symposium and the International Microelectronics Conference, 331-336(1998).

[13] Wang T, Li Y X, Yao J Q et al. The duoble-ended 750 nm and 532 nm laser output from PPLN-FWM[J]. Chinese Physics Letters, 30, 064203(2013). http://www.ingentaconnect.com/content/iop/cpl/2013/00000030/00000006/art064203

[14] Deng Z Q[M]. Design of interdisciplinary institutions(2013).

[15] Lu F X, Rao X L, Li G. Application and development of bonded NdFeB permanent magnets[J]. Rare Earth Information, 346, 19-21(2013).

[16] Qin L L, Chen C J, Zhang M et al. Effect of Zr on microstructure and properties of magnesium alloy prepared by laser[J]. Applied Laser, 36, 391-396(2016).

[17] Li J Q. Preparation and properties of high temperature sintered NdFeB magnet[D]. Guangzhou: South China University of Technology, 121-124(2012).

[18] Wang X, Wang D S, Gao X S et al. Research status and development in laser additive manufacturing of light alloy components[J]. Applied Laser, 36, 478-483(2016).