• Infrared and Laser Engineering
  • Vol. 50, Issue S2, 20210297 (2021)
Wei Guo, Hao Chang*, Bangdeng Du, and Chenghao Yu
Author Affiliations
  • State Key Laboratory of Laser Propulsion & Application, Department of Aerospace Science and Technology, Space Engineering University, Beijing 101416, China
  • show less
    DOI: 10.3788/IRLA20210297 Cite this Article
    Wei Guo, Hao Chang, Bangdeng Du, Chenghao Yu. Estimation method of laser micro-scale ablation quality based on image[J]. Infrared and Laser Engineering, 2021, 50(S2): 20210297 Copy Citation Text show less
    References

    [1] Phipps C R, Luke J R, Helgeson W, et al. Perfmance test results f the laser powered microthruster[C]American Institute of Physics, 2006.

    [2] S Shen, X Jin, C Hao. Cleaning space debris with a space-based laser system. Chinese Journal of Aeronautics, 27, 805-811(2014).

    [3] C R Phipps. A laser-optical system to re-enter or lower low Earth orbit space debris. Acta Astronautica, 93, 418-429(2014).

    [4] C R Phipps, K L Baker, S B Libby, et al. Removing orbital debris with lasers. Advances in Space Research, 49, 1283-1300(2012).

    [5] B Esmiller, C Jacquelard, H A Eckel, et al. Space debris removal by ground-based lasers: main conclusions of the European project CLEANS PACE. Applied Optics, 53, I45-I54(2014).

    [6] Jifei Ye, Yanji Hong, Guangyu Wang, et al. Measurement method for microgram amounts laser ablation mass. Journal of Propulsion Technology, 31, 372-376(2010).

    [7] T C Lilly, A Ketsdever, A P Pancotti, et al. Development of a specific impulse balance for capillary discharge pulsed plasma thrusters. Journal of Pro-pulsion and Power, 25, 823-826(2009).

    [8] Xing Jin, Wentang Wu, Weijing Zhou, et al. Design method of micro-impulse measuring system based on pivots for pulsed micro-thruster. Infrared and Laser Engineering, 48, S117005(2019).

    [9] Xing; Chang Hao; Ye Jifei Jin. Methods of extreme short pulse laser ablation impulse coupling measurem ent. Infrared and Laser Engineering, 46, 0329002(2017).

    [10] Hao Chang, Jifei Ye, Zhengguo Lin. Simulation analysis of response characteristics of torsion pendulum by pulse micro-thrust. Infrared and Laser Engineering, 45, S218001(2016).

    [11] A D Ketsdever, B C D'Souza, R H Lee. Thrust stand micromass balance for the direct measurement of specific impulse. Journal of Propulsion and Power, 24, 1376-1381(2008).

    [12] Weijing Zhou, Yanji Hong, Jifei Ye, et al. Direct measurement method of specific im-pulse for pulse laser ablation micropropulsion. Journal of Propulsion Technology, 38, 1434-1440(2017).

    [13] Gonzales D A, Baker R P. Micropropulsion using a Nd: YAG microchip laser[C]SPIE, 2002, 4760: 752765.

    [14] B Heise, D Stifter. Quantitative phase reconstruction for ortho gonal scanning differential phase contrast optical coh-erence tomo graphy. Optics Letters, 34, 1306-1308(2009).

    [15] J-F Hu, W-S Zheng, X Xie, et al. Sparse transfer for facial shape- from-shading. Pattern Recognition, 68, 272-285(2017).

    [16] W C Shi, J M Zheng, Y Li, et al. Three-dimensional reconstruction method for machined surface topography based on gray gradient constraints. Applied Sciences, 9, 591(2019).

    [17] Jifei Ye, Yanji Hong, Guangyu Wang, et al. Research progre-ss in micro-laser plasma propulsion. Chinese Optics, 4, 319-326(2011).

    [18] Yi Zhang, Zhiyuan Zhang, Xin Lu, et al. Development of laser plasma micro-propulsion. Science & Technology Review, 70-74(2007).

    [19] S Tozza, M Falcone. Analysis and approximation of some shape -from-shading models for non- Lam bertian su-rfaces. Journal of Mathematical Imaging and Vision, 55, 153-178(2016).

    [20] M Alhulayil, A B Younes, J D Turner. Higher order algorithm for solving La-mbert’s problem. The Journal of the Astronautical Sciences, 65, 400-422(2018).

    [21] G Wang, J Cheng. Three-dime nsional reconstruction of hybrid surfaces using perspective shape from shading. Optik, 127, 7740-7751(2016).

    [22] Q Meng, H Wang, W Xu, et al. A coupling method incorporating digital image processing and discrete element method for modeling of geomaterials. Engineering Computations, 35, 411-431(2018).

    [23] L Yang, N Zhang, Y Ren, et al. Linear perspective shape-from-shading method with two images. Journal of Systems Engineering and Electronics, 26, 1080-1087(2015).

    [24] S Bruvoll, M Reimers. Spherical surface parameterization for perspective shape from shading. Pattern Recognition Letters, 33, 33-40(2012).

    [25] Lukas Urech, Marc Hauer, Thomas Lippert, et al. Designed polymers f laser based microthrusters: crelation of thrust with material, plasma, shockwave properties[C] SPIE, 2005, 5448: 5264.

    [26] Lele Luo, Zhiguo Dou, Weijin Zhou, et al. Effects of different dopants on laser ablation propulsion performance of GAP. Journal of Propulsion Technology, 39, 2615-2623(2018).

    CLP Journals

    [1] Xiaodong Jia, Fengxue Qian, Wurui Ta, Hang Zhao, Xiaoqiang Wang, Juanjuan Zhang. Laser transmission and attenuation characteristics in high-speed flow field[J]. Infrared and Laser Engineering, 2023, 52(11): 20230150

    Wei Guo, Hao Chang, Bangdeng Du, Chenghao Yu. Estimation method of laser micro-scale ablation quality based on image[J]. Infrared and Laser Engineering, 2021, 50(S2): 20210297
    Download Citation