Study on Self-Q-switched Er-doped Fiber Laser Based on SBS

[in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]; [in Chinese]

Journals >Chinese Journal of Lasers >Volume 28 >Issue 4 >Page 310 > Article

Chinese Journal of Lasers
Vol. 28, Issue 4, 310 (2001)

Study on Self-Q-switched Er-doped Fiber Laser Based on SBS

[in Chinese]¹, [in Chinese]¹, [in Chinese]¹, [in Chinese]¹, [in Chinese]¹, [in Chinese]², [in Chinese]², [in Chinese]², [in Chinese]², and [in Chinese]²

Author Affiliations

¹[in Chinese]

²[in Chinese]

show less

DOI: Cite this Article Set citation alerts

[in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Study on Self-Q-switched Er-doped Fiber Laser Based on SBS[J]. Chinese Journal of Lasers, 2001, 28(4): 310 Copy Citation Text

show less

Abstract

Self-Q-switched Er-dopedfiber laser has been studied in this paper. Er-doped fiber is applied as gain medium,which is pumped by CW 980 nm LD. A fiber grating is used as the wavelength selector andcavity reflector. The stable self-Q-switched laser output is realized based on thenonlinearity of SM fiber―stimulated Brillouin scattering. The repetition rate about 64.5MHz, and the full width at half maximum (FWHM) about 2.2 ns are obtained.

Keywords

self-Q-switched stimulated Brillouin backscattering fiber laser

Download Citation

Set citation alerts for the article

Tools

Set citation alerts for the article

Save the article for my favorites

Paper Information