[1] Du Yunfei, Liu Bo, Hu Bingliang, et al. A compensation method of image motion in full-frame CCD aerial camera[J]. Acta Photonica Sinica, 2007, 36(12): 2334-2336. (in Chinese)

[2] Fu Chengyu, Jiang Lingtao. Image tracking system with a fine-steering-mirror[J]. Opto-Electronic Engineering, 1994(3): 1-8. (in Chinese)

[3] Loney G C. Design of a high-bandwidth steering mirror for space-based optical communications[C]//Active and Adaptive Optical Components. International Society for Optics and Photonics, 1992.

[4] Xu Xinhang, Yang Hongbo, Wang Bin, et al. Research on key technology of fast-steering mirror[J]. Laser & Infrared, 2013, 43(10): 1095-1103. (in Chinese)

[5] Qin Chengyun, Sha Wei, Zhang Xingxiang, et al. Optimization of local space mirror surface shape influenced by temperature[J]. Opto-Electronic Engineering, 2015, 42(2): 28-34. (in Chinese)

[6] Bao Qihong, Sha Wei, Chen Changzheng, et al. Lightweight and optimization design of rectangular reflective mirror supported in centre[J]. Infrared and Laser Engineering, 2017, 46(7): 0718003. (in Chinese)

[7] Wang Fuguo. Analysis of influence of temperature and supporting methods on 1.2 m SiC primary mirror surface figure[J]. Acta Photonica Sinica, 2011, 40(6): 933-936. (in Chinese)

[8] Li Fu, Ruan Ping, Zhao Baochang, et al. Finite element analysis of the plane mirror fastened by adhesive[J]. Optical Technique, 2006, 32(6): 896-899. (in Chinese)

[9] Wang Rudong, Tian Wei, Wang Ping, et al. Effect of temperature change on the surface accuracy of bonded lens[J]. Chinese Journal of Lasers, 2011, 38(8): 201-206. (in Chinese)

[10] Yan Yong, Jin Guang, Yang Hongbo. Lightweight structural design of space mirror[J]. Infrared and Laser Engineering, 2008, 37(1): 97-101. (in Chinese)

[11] Cao Tianjie. Discussions on the fundamental equations for axisymmetric thin circular plates[J]. Mechanics in Engineering, 2016, 38(4): 442-448. (in Chinese)

[12] Xu Xinhang, Wang Bin, Qiao Jian, et al. Lightweight design of mirror in fast-steering mirror system[J]. Chinese Optics, 2012, 5(1): 35-41. (in Chinese)

[13] Tan Jinguo, He Xin, Fu Liangliang. Support technique in centre of minitype reflector[J]. Infrared and Laser Engineering, 2010, 39(6): 1070-1074. (in Chinese)

[14] Dong Deyi, Li Zhilai, Li Ruigang, et al. Simulation and experiment of influence of adhesive on reflective mirror surface[J]. Optics and Precision Engineering, 2014, 22(10):2698-2707. (in Chinese)

[15] Bao Qihong, Sha Wei, Chen Changzheng, et al. Characteristics of rear support in centre for space SiC mirror[J]. Acta Photonica Sinica, 2017, 46(2): 22-31. (in Chinese)