[1] Shuang Gong, Jinrong Tian, Kexuan Li, et al. Advances in new two-dimensional materials and its application in solid-state lasers. Chinese Optics, 11, 18-30(2018).
[2] Ya Wen, Chunting Wu, Zerui Yuan, et al. Research progress of far-infrared solid-state lasers. Chinese Optics, 11, 889-900(2018).
[3] Bocang Qiu, Hai Hu Martin, Weimin Wang, et al. Design and fabrication of 12 W high power and high reliability 915 nm semiconductor lasers. Chinese Optics, 11, 590-603(2018).
[4] Yuhui Su, Xiaoxia Gong, Shengqiong Lei, et al. Discussion of reliability evaluation on infrared photovoltaic detector by noise. Infrared Technology, 31, 509-512(2009).
[5] A Rogalski. Material considerations for third generation infrared photon detectors. Infrared Physics and Technology, 50, 53-58(2007).
[6] P Tobin Stephen. Thermal cycling induced changes in excess dark current in very long wavelength HgCdTe photodiodes at low temperature. Journal of Electronic Materials, 35, 1411-1415(2006).
[7] Zhiqiang Nie, Mingpei Wang, Yubo Sun, et al. High power semiconductor laser lifetime prediction and failure analysis based on Weibull and Log-normal distribution. Infrared and Laser Engineering, 48, S105003(2019).
[8] Bo Peng, Pu Zhang, Tianqi Chen, et al. Reliability of bonding interface in high power diode lasers. Infrared and Laser Engineering, 47, 1105002(2018).
[9] Lichao Hao, Aibo Huang, Canxiong Lai, et al. Discussion of reliability analysis on IRFPAs by bad pixel. Infrared and Laser Engineering, 45, 0504004(2016).
[10] Ligang Yuan, Shouhuan Zhou, Hong Zhao, et al. 109.5 W output 1.94 micron Tm: YAP solid-state laser. Infrared and Laser Engineering, 48, 0405006(2019).
[11] Liming Zhang, Shouheng Zhou, Hong Zhao, et al. Introduction of Fe2+ doped mid-infrared solid state laser. Laser and Infrared, 42, 360-364(2012).
[12] Haisha Niu, Lianqing Zhu, Ning Liu. Laser feedback stress measurement system based on fourier transform phase extraction method. Optics and Precision Engineering, 26, 1954-1959(2020).
[13] Fan Zhu, Yingxian Li, Jiubin Tan. Design of high-accuracy laser beam collimation system. Optics and Precision Engineering, 28, 817-826(2020).
[14] Cunxiao Miao, Guozhu Xing, Jianfeng Liu, et al. Design of current drive and alternating current temperature control system for high-precision laser. Infrared and Laser Engineering, 48, 0905004(2019).
[15] Jintian Bian, Jinsong Nie, Xiaoquan Sun. Mid-infrared lase rteehnology and its progress. Infrared and Laser Engineering, 35, 188-193(2006).
