Process Optimization of CNTs/Cu Composite Coating Prepared by Laser-Assisted Low Pressure Cold Spraying

Chaowei Jiang; Bo Liu; Yunyi Zhang; Jingyong Sun; Bo Li; Qunli Zhang; Jianhua Yao

doi:10.3788/LOP202259.0724001

[1] Qian B G, Geng H R, Guo Z Q et al. Development and application of electrical contact materials[J]. Materials for Mechanical Engineering, 28, 7-9(2004).

[2] He S Y, Liu X D, Zhao S Z et al. Microstructure and wear resistance of carbon fibers reinforced 316L stainless steel prepared using laser cladding[J]. Chinese Journal of Lasers, 47, 0502010(2020).

[3] Bai Y, Wang Z H, Zuo J J et al. Fe-based composite coating prepared by laser cladding and its heat and corrosion resistance[J]. Chinese Journal of Lasers, 47, 1002001(2020).

[4] Du Z M, Wang J B, Fu C et al. The current situation and application of cladding technology in the copper based electrical contact materials[J]. Electrical Engineering Materials, 30-34(2009).

[5] Shirvanimoghaddam K, Hamim S U, Akbari M K et al. Carbon fiber reinforced metal matrix composites: fabrication processes and properties[J]. Composites Part A: Applied Science and Manufacturing, 92, 70-96(2017).

[6] Moghadam A D, Omrani E, Menezes P L et al. Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene-a review[J]. Composites Part B: Engineering, 77, 402-420(2015).

[7] Dong L L, Chen W G, Zheng C H et al. Microstructure and properties characterization of tungsten-copper composite materials doped with graphene[J]. Journal of Alloys and Compounds, 695, 1637-1646(2017).

[8] Dong L L, Chen W G, Deng N et al. Investigation on arc erosion behaviors and mechanism of W70Cu30 electrical contact materials adding graphene[J]. Journal of Alloys and Compounds, 696, 923-930(2017).

[9] Babu R V, ThermalKanagaraj S.. electrical and mechanical characterization of microwave sintered copper/carbon nanotubes (CNT) composites against sintering duration, CNT diameter and its concentration[J]. Journal of Materials Processing Technology, 258, 296-309(2018).

[10] Song J L, Chen W G, Dong L L et al. An electroless plating and planetary ball milling process for mechanical properties enhancement of bulk CNTs/Cu composites[J]. Journal of Alloys and Compounds, 720, 54-62(2017).

[11] Hao J, Ma X, Lin W S. Microstructure and properties of laser-cladded CNTs/Cu coatings on pure copper substrate[J]. Materials for Mechanical Engineering, 40, 35-38(2016).

[12] Cho S C, Takagi K, Kwon H et al. Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process[J]. Surface and Coatings Technology, 206, 3488-3494(2012).

[13] Yao J H, Wu L J, Li B et al. Research states and development tendency of supersonic laser deposition technology[J]. Chinese Journal of Lasers, 46, 0300001(2019).

[14] Barton D J, Hornbuckle B C, Darling K A et al. Influence of surface temperature in the laser assisted cold spray deposition of sequential oxide dispersion strengthened layers: microstructure and hardness[J]. Materials Science and Engineering: A, 811, 141027(2021).

[15] Zhang C, Zhang D B, Luo C et al. Nanosecond-pulse laser assisted cold spraying of Al-Cu aluminum alloy[J]. Coatings, 11, 267(2021).

[16] Barton D J, Bhattiprolu V S, Hornbuckle B C et al. Residual stress generation in laser-assisted cold spray deposition of oxide dispersion strengthened Fe91Ni8Zr1[J]. Journal of Thermal Spray Technology, 29, 1550-1563(2020).

[17] Li B, Jin Y, Yao J H et al. Influence of laser irradiation on deposition characteristics of cold sprayed Stellite-6 coatings[J]. Optics & Laser Technology, 100, 27-39(2018).

[18] Li B, Jin Y, Yao J H et al. Solid-state fabrication of WCp-reinforced Stellite-6 composite coatings with supersonic laser deposition[J]. Surface and Coatings Technology, 321, 386-396(2017).

[19] Birt A M, Champagne V K, Sisson R D et al. Statistically guided development of laser-assisted cold spray for microstructural control of Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 48, 1931-1943(2017).

[20] Barton D J, Bhattiprolu V S, Thompson G B et al. Laser assisted cold spray of AISI 4340 steel[J]. Surface and Coatings Technology, 400, 126218(2020).

[21] Li B, Yao J H, Zhang Q L et al. Microstructure and tribological performance of tungsten carbide reinforced stainless steel composite coatings by supersonic laser deposition[J]. Surface and Coatings Technology, 275, 58-68(2015).

[22] Wang J J, Tian K, Chen Z J et al. Microstructure and wear resistance of graphite/Cu composite coating prepared by supersonic laser deposition[J]. Chinese Journal of Lasers, 48, 1802015(2021).

[23] Zhang G, Zhang J, Li B et al. Influence of laser irradiation on compactness and wear resistance of Ti6Al4V coating prepared by supersonicl aser deposition[J]. Acta Optica Sinica, 41, 1414002(2021).

[24] Sun J Y, Yan Y L, Li B et al. Comparative study on cavitation-resistance and mechanism of stellite-6 coatings prepared with supersonic laser deposition and laser cladding[J]. Chinese Journal of Lasers, 48, 1002118(2021).

[25] Wu L J, Wang W L, Li B et al. Influence of diamond particle size and content on the microstructure and properties of diamond/Cu composite coating prepared by supersonic laser deposition[J]. Surface Technology, 48, 40-46(2019).

[26] Wu L J, Zhang G, Li B et al. Study on microstructure and tribological performance of diamond/Cu composite coating via supersonic laser deposition[J]. Coatings, 10, 276(2020).

[27] Huang X J, Wu L J, Li B et al. Microstructure characterization and tribological properties evaluation on WC/Cu composite coating prepared by supersonic laser deposition[J]. Journal of Mechanical Engineering, 56, 78-85(2020).

[28] Assadi H, Kreye H, Gärtner F et al. Cold spraying——a materials perspective[J]. Acta Materialia, 116, 382-407(2016).