Effect of Defocus Distance on Formability of CX Maraging Stainless Steel by Selective Laser Melting

Liangliang Zhang; Minjie Wang; Jiaqi Zhang; Jianye Liu; Liuhui Niu; Jinhai Wang

doi:10.3788/CJL202148.2202020

[1] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[2] Tian J, Wei Q S, Zhu W Z et al. Selective laser melting process and mechanical properties of Cu-Al-Ni-Ti alloy[J]. Chinese Journal of Lasers, 46, 0302001(2019).

[3] DebRoy T, Wei H L, Zuback J S et al. Additive manufacturing of metallic components-process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).

[4] Lee J, Choe J, Park J et al. Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions[J]. Materials Characterization, 155, 109817(2019).

[5] Asgari H, Mohammadi M. Microstructure and mechanical properties of stainless steel CX manufactured by direct metal laser sintering[J]. Materials Science and Engineering: A, 709, 82-89(2018).

[6] Mooney B, Kourousis K I, Raghavendra R. Plastic anisotropy of additively manufactured maraging steel: influence of the build orientation and heat treatments[J]. Additive Manufacturing, 25, 19-31(2019).

[7] Tan C L, Zhou K S, Ma W Y et al. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel[J]. Materials & Design, 134, 23-34(2017).

[8] Mutua J, Nakata S, Onda T et al. Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel[J]. Materials & Design, 139, 486-497(2018).

[9] Qu S, Li L J, Hou M S et al. Methods to improve accuracy of laser scanning projection system[J]. Laser & Optoelectronics Progress, 55, 020801(2018).

[10] Pirgazi H, Sanjari M, Tamimi S et al. Texture evolution in selective laser melted maraging stainless steel CX with martensitic transformation[J]. Journal of Materials Science, 56, 844-853(2021).

[11] Dong D D, Chang C, Wang H et al. Selective laser melting (SLM) of CX stainless steel: theoretical calculation, process optimization and strengthening mechanism[J]. Journal of Materials Science & Technology, 73, 151-164(2021).

[12] Bean G E, Witkin D B, McLouth T D et al. Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting[J]. Additive Manufacturing, 22, 207-215(2018).

[13] Bertoli U S, Wolfer A J, Matthews M J et al. On the limitations of volumetric energy density as a design parameter for selective laser melting[J]. Materials & Design, 113, 331-340(2017).

[14] Song B, Dong S J, Coddet P et al. Fabrication of NiCr alloy parts by selective laser melting: columnar microstructure and anisotropic mechanical behavior[J]. Materials & Design, 53, 1-7(2014).

[15] Cao L C, Zhou Q, Han Y F et al. Review on intelligent monitoring of defects and process control of selective laser melting additive manufacturing[J/OL]. Acta Aeronautica et Astronautica Sinica: 1-37. [2021-04-25]. http://kns.cnki.net/kcms/detail/11.1929.V.20201209. 1048.010.html

[16] Khairallah S A, Anderson A T, Rubenchik A et al. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones[J]. Acta Materialia, 108, 36-45(2016).

[17] Qiu C L, Panwisawas C, Ward M et al. On the role of melt flow into the surface structure and porosity development during selective laser melting[J]. Acta Materialia, 96, 72-79(2015).

[18] Wang D, Song C H, Yang Y Q et al. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts[J]. Materials & Design, 100, 291-299(2016).

[19] McLouth T D, Bean G E, Witkin D B et al. The effect of laser focus shift on microstructural variation of Inconel 718 produced by selective laser melting[J]. Materials & Design, 149, 205-213(2018).

[20] Yasa E, Deckers J, Kruth J P. The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts[J]. Rapid Prototyping Journal, 17, 312-327(2011).

[21] Chen S, Tao F H, Jia C Z. Microstructure and micro-hardness of 4Cr5MoSiV1 die steels fabricated by selective laser melting[J]. Chinese Journal of Lasers, 46, 0102007(2019).

[22] Zhang J Q, Wang M J, Liu J Y et al. Influence of defocusing distance on microstructure and mechanical properties of 3D-printed 18Ni-300 maraging steel[J]. Chinese Journal of Lasers, 47, 0502004(2020).

[23] Zhong Y, Liu L F, Wikman S et al. Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting[J]. Journal of Nuclear Materials, 470, 170-178(2016).

[24] Sanjari M, Hadadzadeh A, Pirgazi H et al. Selective laser melted stainless steel CX: role of built orientation on microstructure and micro-mechanical properties[J]. Materials Science and Engineering: A, 786, 139365(2020).

[25] Chang C, Yan X C, Bolot R et al. Influence of post-heat treatments on the mechanical properties of CX stainless steel fabricated by selective laser melting[J]. Journal of Materials Science, 55, 8303-8316(2020).

[26] Liverani E, Toschi S, Ceschini L et al. Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel[J]. Journal of Materials Processing Technology, 249, 255-263(2017).