• Photonic Sensors
  • Vol. 3, Issue 3, 208 (2013)
F. C. FAVERO1、*, M. BECKER2, R. SPITTEL1, M. ROTHHARDT1, J. KOBELKE1, and and H. BARTELT1
Author Affiliations
  • 1Institute of Photonic Technology (IPHT), Albert-Einstein-Strabe-9, 07745, Jena, Germany
  • 2Institute of Photonic Technology (IPHT), Albert-Einstein-Strae-9, 07745, Jena, Germany
  • show less
    DOI: 10.1007/s13320-013-0116-5 Cite this Article
    F. C. FAVERO, M. BECKER, R. SPITTEL, M. ROTHHARDT, J. KOBELKE, and H. BARTELT. Micro-Structured Fiber Interferometer as Sensitive Temperature Sensor[J]. Photonic Sensors, 2013, 3(3): 208 Copy Citation Text show less
    References

    [1] M. Willsch, T. Bosselmann, P. Flohr, R. Kull, W. Ecke, I. Latka, et al., “Design of fiber optical high temperature sensors for gas turbine monitoring,” in Proc. SPIE, vol. 7503, pp. 75037R-1-75037R-4, 2009.

    [2] L. V. Nguyen, D. Hwang, S. Moon, D. S. Moon, and Y. Chung, “High temperature fiber sensor with high sensitivity based on core diameter mismatch,” Optics Express, vol. 16, no. 15, pp. 11369-11375, 2008.

    [3] J. Villatoro, V. Finazzi, V. P. Minkovich, V. Pruneri, and G. Badenes, “Temperature-insensitive photonic crystal fiber interferometer for absolute strain sensing,” Applied Physics Letters, vol. 91, no. 9, pp. 091109-1-091109-3, 2007.

    [4] G. Coviello, V. Finazzi, J. Villatoro, and V. Pruneri, “Thermally stabilized PCF-based sensor for temperature measurements up to 1000 ℃,” Optics Express, vol. 17, no. 24, pp. 21551-21559, 2009.

    [5] B. Larrión, M. Hernánez, F. J. Arregui, J. Goicoechea, J. Bravo, and I. R. Matías, “Photonic crystal fiber temperature sensor based on quantum dot nanocoatings,” Journal of Sensors, vol. 2009, 932471-1-932471-6, 2009.

    [6] S. Torres-Peiro, A. Diez, J. L. Cruz, and M. V. Andres, “Temperature sensor based on Ge-doped microstructured fibers,” Journal of Sensors, vol. 2009, pp. 417540-1-417540-5, 2009.

    [7] W. Qian, C. Zhao, C. Chan, L. Hu, T, Li, W. Wong, et al., “Temperature sensing based on ethanol-filled photonic crystal fiber modal interferometer,” Sensors Journal, vol. 12, no. 8, pp. 2593-2597, 2012.

    [8] A. Bozolan, R. M. Gerosa, C. J. S. de Matos, and M. A. Romero, “Temperature sensing using colloidal-core photonic crystal fiber,” Sensors Journal, vol. 12, no.1, pp. 195-200, 2012.

    [9] S. M. Nalawade and H. V. Thakur, “Photonic crystal fiber strain-independent temperature sensing based on modal interferometer,” IEEE Photonics Technology Letters, vol. 23, no. 21, pp. 1600-1602, 2011.

    [10] Q. Wu, Y. Semenova, J. Mathew, P. Wang, and G. Farrell, “Humidity sensor based on a single-mode hetero-core fiber structure,” Optics Letters, vol. 36, no. 10, pp. 1752-1754, 2011.

    [11] H. Y. Choi, M. J. Kim, and B. H. Lee, “All-fiber Mach-Zehnder type interferometers formed in photonic crystal fiber,” Optics Express, vol. 15, no. 9, pp. 5711-5719, 2007.

    [12] K. Busch and S. John, “Photonic band gap formation in certain self-organizing systems,” Physical Review E, vol. 58, no. 3, pp. 3896-3907, 1998.

    [13] G. Ghosh, M. Endo, and T. Iwasaki, “Temperature-dependent Sellmeier coefficients and chromatic dispersions for some optical fiber glasses,” Journal of Lightwave Technology, vol. 12, no. 8, pp. 1338-1342, 1994.

    [14] Y. J. Kim, U. C. Paek, and B. H. Lee, “Measurement of refractive-index variation with temperature by use of long-period fiber gratings,” Optics Letters, vol. 27, no. 15, pp. 1297-1299, 2002.

    CLP Journals

    [1] GUO Jun-qi, ZHONG Yi, LIU Yu, YANG Xiao-hui, XIAO Ming-lang, ZHOU Min. A novel high birefringence equal diameter circular-hole photonic crystal fiber[J]. Optoelectronics Letters, 2017, 13(5): 349

    F. C. FAVERO, M. BECKER, R. SPITTEL, M. ROTHHARDT, J. KOBELKE, and H. BARTELT. Micro-Structured Fiber Interferometer as Sensitive Temperature Sensor[J]. Photonic Sensors, 2013, 3(3): 208
    Download Citation